Uploaded February 2020 | Updated November 2026, 2 days ago
Available at the X-plane.org Store:
store.x-plane.org/Airbus-A321-by-Toliss_p_1174.html
Description:
Officially licensed Airbus product
Highlights
- Detailed FMGS with SIDs/STARs/Airways, performance prediction, temporary, alternate and secondary flight plans, fix info, etc.
- Choice of CFM or IAE engine, affecting aircraft performance and fuel burn
- Choice of sharklets or classic wing tip fences. (Affects aircraft drag.)
- Very accurate FBW implementation, including reversion to alternate and direct law
- Detailed systems including fault injection for currently about 90 failures. (Electric, hydraulic, flight controls, engine, etc.)
- Officially licensed by Airbus
- Commercial “Turbine Sound Studios” sounds for CFM and IAE engines included.
Detailled FMGS:
- Support of SID/STAR, including all leg types (Arc, course or heading to intercept, Radius to Fix, Holdings, etc.)
- Temporary and alternate flight plans
- Secondary flight plan
- Full VNAV guidance with TOC, TOD, Deceleration point, speed limits, fuel prediction, etc.
- Altitude and speed constraints as the real aircraft deals with them
- Ability to change the selected STAR while already in the STAR
- Support for go-arounds and diversions
- Step altitudes
- Airway support
- Fix Info page
- Latitude/Longitude crossings
- 2 independent MCDUs and autopilots
- Drag, thrust and fuel consumption models adapt to selected engine type and wing tip device
- Choice between new FMGS with temporary flight plan even during preflight phase or old FMGS with direct editing of the active plan during preflight phase.
Top-notch aircraft systems:
- ToLiss uses the QPAC Fly-by-wire and autopilot module with numerous improvements
- Flight control system with hinge moment modelling giving realistic float angles for surfaces that are lost due to system faults
- Custom TCAS with Traffic and Resolution Advisory based on real aircraft logic
- Brake temperature model based on the detailled physics of heat transfer between the individual brake components
- Hydraulics model in which the pressure is dependent on usage. This is most notable when dropping to RAT mode or with and engine wind milling
- Detailled model of each ADIRU including alignment, small pressure sensor differences between the units, switching of sources for PFDs
- Custom air conditioning model supporting high altitude operations at airports like Cusco in Peru or La Paz in Bolivia without spurious warnings
- Flight warning system with ECAM actions supporting numerous system failure scenarios, e.g. engine failures, generator failures, hydraulic failures
- Fault injection system allowing to trigger system faults either at a specific point in flight or randomly during a flight phase
Eye- and ear-candy:
- Detailed 3D cockpit with high quality texturing
- 3d exterior model with CFM and IAE engine
- Choice between classic wingtip fences or modern sharklets (controlled via livery names)
- Each aircraft comes with licensed high definition sounds from Turbine Sound Studios, the market leader for aircraft sounds in the FSX/P3D world
- Rain effects thanks to the librain library provided to the x-plane community by Saso Kiselkov
- Custom particle effects for engine heat trail, landing gear smoke on touch-down etc.
- Standby compass that can be stowed, cockpit door that opens, fully modeled cabin, etc.
Usability features:
- Situation loading and saving. It is possible to save the flight at any point in time and resume it another day. This can also be used, e.g., to save the position just before approach and practice just the approach many times
- Autosaving allows recovering where you left off, should the Xplane session end unexpectedly
- Jumping waypoint-to-waypoint through the cruise phase: Shorten your flight to focus on the more interesting parts as you like
- 4 different startup configuration from Cold and Dark to engines running and ready to go
- In-screen popup displays or use of x-plane windows for popups
Wanna help me create more high-quality content and support me? Become a patron: patreon.com/ThomasRasmussen?ty=h
Follow me on instagram:
instagram.com/rasmussen_aviation
Like me on Facebook:
facebook.com/RasmussenAviation
If you like my videos, please subscribe to my channel.
Thank You For Watching!
2020 (C) Thomas Rasmussen
Please, notice that reupload or any use of my videos without granded permission and proper credit will be removed without further notice!
Available at the X-plane.org Store:
store.x-plane.org/Airbus-A321-by-Toliss_p_1174.html
Description:
Officially licensed Airbus product
Highlights
- Detailed FMGS with SIDs/STARs/Airways, performance prediction, temporary, alternate and secondary flight plans, fix info, etc.
- Choice of CFM or IAE engine, affecting aircraft performance and fuel burn
- Choice of sharklets or classic wing tip fences. (Affects aircraft drag.)
- Very accurate FBW implementation, including reversion to alternate and direct law
- Detailed systems including fault injection for currently about 90 failures. (Electric, hydraulic, flight controls, engine, etc.)
- Officially licensed by Airbus
- Commercial “Turbine Sound Studios” sounds for CFM and IAE engines included.
Detailled FMGS:
- Support of SID/STAR, including all leg types (Arc, course or heading to intercept, Radius to Fix, Holdings, etc.)
- Temporary and alternate flight plans
- Secondary flight plan
- Full VNAV guidance with TOC, TOD, Deceleration point, speed limits, fuel prediction, etc.
- Altitude and speed constraints as the real aircraft deals with them
- Ability to change the selected STAR while already in the STAR
- Support for go-arounds and diversions
- Step altitudes
- Airway support
- Fix Info page
- Latitude/Longitude crossings
- 2 independent MCDUs and autopilots
- Drag, thrust and fuel consumption models adapt to selected engine type and wing tip device
- Choice between new FMGS with temporary flight plan even during preflight phase or old FMGS with direct editing of the active plan during preflight phase.
Top-notch aircraft systems:
- ToLiss uses the QPAC Fly-by-wire and autopilot module with numerous improvements
- Flight control system with hinge moment modelling giving realistic float angles for surfaces that are lost due to system faults
- Custom TCAS with Traffic and Resolution Advisory based on real aircraft logic
- Brake temperature model based on the detailled physics of heat transfer between the individual brake components
- Hydraulics model in which the pressure is dependent on usage. This is most notable when dropping to RAT mode or with and engine wind milling
- Detailled model of each ADIRU including alignment, small pressure sensor differences between the units, switching of sources for PFDs
- Custom air conditioning model supporting high altitude operations at airports like Cusco in Peru or La Paz in Bolivia without spurious warnings
- Flight warning system with ECAM actions supporting numerous system failure scenarios, e.g. engine failures, generator failures, hydraulic failures
- Fault injection system allowing to trigger system faults either at a specific point in flight or randomly during a flight phase
Eye- and ear-candy:
- Detailed 3D cockpit with high quality texturing
- 3d exterior model with CFM and IAE engine
- Choice between classic wingtip fences or modern sharklets (controlled via livery names)
- Each aircraft comes with licensed high definition sounds from Turbine Sound Studios, the market leader for aircraft sounds in the FSX/P3D world
- Rain effects thanks to the librain library provided to the x-plane community by Saso Kiselkov
- Custom particle effects for engine heat trail, landing gear smoke on touch-down etc.
- Standby compass that can be stowed, cockpit door that opens, fully modeled cabin, etc.
Usability features:
- Situation loading and saving. It is possible to save the flight at any point in time and resume it another day. This can also be used, e.g., to save the position just before approach and practice just the approach many times
- Autosaving allows recovering where you left off, should the Xplane session end unexpectedly
- Jumping waypoint-to-waypoint through the cruise phase: Shorten your flight to focus on the more interesting parts as you like
- 4 different startup configuration from Cold and Dark to engines running and ready to go
- In-screen popup displays or use of x-plane windows for popups
Wanna help me create more high-quality content and support me? Become a patron: patreon.com/ThomasRasmussen?ty=h
Follow me on instagram:
instagram.com/rasmussen_aviation
Like me on Facebook:
facebook.com/RasmussenAviation
If you like my videos, please subscribe to my channel.
Thank You For Watching!
2020 (C) Thomas Rasmussen
Please, notice that reupload or any use of my videos without granded permission and proper credit will be removed without further notice!

![[Unboxing & Review] T-rudder MK-IV Rudder Pedals (VKBSim)
Purchase the rudder pedals at X-plane.org Store:
http://store-x-plane-org.3dcartstores.com/VKB-T-Rudder-Pedals-MkIV_p_571.html#tab-1
Dont miss the VKB Gladiator MK-II Joystick review : https://youtu.be/TDFuix7_4Hw
Description:
Newest High-Tech rudder pedals from VKB
The most precise pedals you can get for a flight sim. Unlike other pedals from competitors, the T-Rudder Pedals do not use plastic parts and do not feel bulky. They have the highest degree of precision of any flight sim pedals. If precision and accuracy matter to you, these are your pedals.
Main features
- Sturdy Steel Construction
- Ultra-High Resolution sensor for precise control
- Non-contact MaRS sensor with resolution of 0.01 degrees
- No Noise : Noise is a common issue on low-end pedals where electronic interference are generated, reducing accuracy. Not an issue with VKB Pedals
- Virtual Toe-Brake (Windows only )
Specifications
- 12 Ball Bearings
- Reversable Cam
- Aluminium Heel Pads
- 32 bit ARM Controller
- USB 2.0
- Upgradeable Firmware via USB
- Virtual Toe-Brakes (Windows only, see instructions)
Dimensions
Will fit under any desk / home cockpit
- Adjustable for different shoe size and height
- Size when assembled 18x 0x 4 inches or 40x 24x10 cm
- Net Weight 6lbs / 2.7 kg
The pedals are shipped partially un-assembled. Estimated time to assemble pedals for an inexperienced user is only 10 min.
Wanna help me create more high-quality content and support me? Become a patron: https://www.patreon.com/ThomasRasmussen?ty=h
Follow me on instagram:
https://www.instagram.com/rasmussen_aviation/
Like me on Facebook:
https://www.facebook.com/RasmussenAviation/
If you like my videos, please subscribe to my channel.
Thank You For Watching!
2017 (C) Thomas Rasmussen
Please, notice that reupload or any use of my videos without granded permission and proper credit will be removed without further notice! [Unboxing & Review] T-rudder MK-IV Rudder Pedals (VKBSim)](https://i.ytimg.com/vi/lv5H27l851E/mqdefault.jpg)


![[X-plane 11] Flight Sim School - VFR Lesson 3 - Climbing & Descending
New episodes scheduled for Saturdays!
Do not miss the other flight lessons:
VFR Lesson 0 - Introduction: https://youtu.be/OJb07xjeDRo
VFR Lesson 1 - Flight Controls: https://youtu.be/vo0KR3QHYVk
VFR Lesson 2 - Straight & Level Flight: https://youtu.be/wQ2oQnBm7YU
VFR Lesson 3 - Climbing & Descending: https://youtu.be/mYBV80I719U
VFR Lesson 4 - Medium Turns: https://youtu.be/zQBlT3vEyRs
VFR Lesson 5 - Basic & Advanced Stalling: https://youtu.be/6KURs52r6H4
VFR Lesson 6 - Basic Circuits: https://youtu.be/R-nYqoNFoh4
VFR Lesson 7 - Circuits with Wind: https://youtu.be/j-aHs15xSdo
This video tutorial series is aimed at teaching you to fly in a flight simulator just the way you would learn to fly a real aircraft in a real world flight school! In the series, Ill be using X-plane 11 but you can for that matter use any flight simulator of choice. To make the series Ive got assistance from flight instructor Cameron AKA Voidhawk9 from the X-plane.org forums! It will be a step-to-step guide, much the same way you would learn to fly a real aircraft if you were taking private pilot flight lessons! The series assumes little or no knowledge of flying, so it is suitable for beginners, useful to those with a bit more experience in furthering their skills or as a training aid for those taking real flying lessons!
The first part will be the VFR part and will contain a number of lessons about the flight controls, flying straight and level, turns, circuits and so on!
The second part will be the IFR or instrument flight rules part containing a number of lessons about the flight instruments, radio navigation, holding patterns, ILs, flight planning etc!
I hope youll enjoy the series and find the tutorials useful ;-)
Wanna help me create more high-quality content and support me? Become a patron: https://www.patreon.com/ThomasRasmussen?ty=h
Follow me on instagram:
https://www.instagram.com/rasmussen_aviation/
Like me on Facebook:
https://www.facebook.com/RasmussenAviation/
If you like my videos, please subscribe to my channel.
Thank You For Watching!
2017 (C) Thomas Rasmussen
Please, notice that reupload or any use of my videos without granded permission and proper credit will be removed without further notice! [X-plane 11] Flight Sim School - VFR Lesson 3 - Climbing & Descending](https://i.ytimg.com/vi/mYBV80I719U/mqdefault.jpg)
![Skyline KCVG Cincinnati Intl Airport for X-plane 11
Available at the X-plane.org Store:
http://store.x-plane.org/KCVG Cincinnati-International-Airport_p_841.html
Description:
Cincinnati/Northern Kentucky International Airport (KCVG) offers non-stop passenger service to 62 destinations with 179 peak daily departures.The airport is a focus city for Allegiant Air, Delta Air Lines, and Frontier Airlines, as well as being the largest market for Vacation Express. The airports international destinations include Cancún, Cozumel, Freeport, Montego Bay, Paris, Punta Cana, Reykjavík, and Toronto.
In addition, CVG is the fastest-growing cargo airport in North America: The airport is a global hub for both Amazon Air and DHL Aviation, handling numerous domestic and international cargo flights every day.
Overall, CVG ranks 4th in North America for total cargo operations.[Wikipedia]
Warning: This is a massive scene with a download size of 4Gb
Animated Airport
- Animated Custom 3D model Jetways
- Ground Traffic in whole airport WT3 Ready
- Randomly placed static aircraft, can be easily toggled off in the X-Plane settings
- Radar Animation
Detailed Airport
- UHD Custom Textures using the latest painting techniques
- Custom Mesh with slope runway accuracy
- Detailed with high accuracy 3D models
- PBR Materials
- Ground reflections and decals
- Custom 3D Grass and vegetation blends with orthophotos
- Custom HDR Lights billboard and spill in Terminal and Parking areas
- Ultra High resolution custom ground textures and orthoimagery for the airport
- Animated radar
- Accurate WT3 included by Cpt. K-man
- Hundreds of 3D custom static objects like cars, services vehicles and more.
Includes one dsf file for lower spec’s computers
Airport Diagrams PDF
Wanna help me create more high-quality content and support me? Become a patron: https://www.patreon.com/ThomasRasmussen?ty=h
Follow me on instagram:
https://www.instagram.com/rasmussen_aviation/
Like me on Facebook:
https://www.facebook.com/RasmussenAviation/
If you like my videos, please subscribe to my channel.
Thank You For Watching!
2018 (C) Thomas Rasmussen
Please, notice that reupload or any use of my videos without granded permission and proper credit will be removed without further notice! Skyline KCVG Cincinnati Intl Airport for X-plane 11](https://i.ytimg.com/vi/nbZqNKnPii0/mqdefault.jpg)




![[X-plane 11] Flight Factor Airbus 320 Ultimate (WIP) - Prepare for Takeoff!
Disclaimer: The version of the Flight Factor Airbus 320 Ultimate shown in the video is still WIP! A lot of things may change, resulting in an end-product that may be looking slightly different.
Follow the development of the Flight Factor A320 Ultimate on the forums:
https://forums.x-plane.org/index.php?/forums/topic/121624-a320-ultimate-from-flightfactor/
Wanna help me create more high-quality content and support me? Become a patron: https://www.patreon.com/ThomasRasmussen?ty=h
Follow me on instagram:
https://www.instagram.com/rasmussen_aviation/
Like me on Facebook:
https://www.facebook.com/RasmussenAviation/
If you like my videos, please subscribe to my channel.
Thank You For Watching!
2017 (C) Thomas Rasmussen
Please, notice that reupload or any use of my videos without granded permission and proper credit will be removed without further notice! [X-plane 11] Flight Factor Airbus 320 Ultimate (WIP) - Prepare for Takeoff!](https://i.ytimg.com/vi/ofxxdwCG-M8/mqdefault.jpg)