Uploaded December 2019 | Updated September 2026, 2 hours ago

---

#emaxusa #tinyhawkii #tinywhoopracing

So like I talked about in the THII vlog I met up with Dan and David out in Emmitt ID for an epic indoor race! My first one in years and it was a blast. Can 100% vouch for the durability of this thing now... I slammed into walls and the ground a few times with zero damage.

It was also really nice having the upgraded Runcam Nano. Made it pretty easy to see in the low light compared to some of the Tinyhawk S's and Beta's I was racing against.

I did have issues with the camera moving after a crash so to fix that I set my cam angle then put a zip tie around the neck of it. (like a choker) and it stayed in place the rest of the night!

UAV Tech Jesc video - youtube.com/watch?v=Fhn2LdCMqgw&t=596s

UAV Tech 48khz video - youtube.com/watch?v=iyQoOrXuldc&t=270s

Jflight store for JESC license (needed for blheli-s rpm filtering)
tinyurl.com/w2lzvwe

BF setup -
BIDIR Dshot on
Motor Idle 5
4/4 Dshot 300 / 12 motor pole
Anti-Gravity off
P and D Gain 1.6 Rest of the PID sliders default
FF Transition and Throttle boost set to 0
D Min Gain = 30 D Min Advance = 25

All throttle settings set to default (no expo)

Filter sliders set to 2
Dyn Notch Width % set to 0 (single notch)
Dyn Notch Q set to 250

TinyHawk II - tinyurl.com/w4ccwrv
Bangood - bit.ly/391bqw3

Video -

DJI Goggles - tinyurl.com/ugkenc3
TBS Fusion - tinyurl.com/v344dq5

Control -

Jumper T16 - tinyurl.com/sthsom2