Uploaded October 2026 | Updated November 2026, 2 days ago
This project is uses #3DPrinting and #electronics to create a #cosplay prop that lights up. The head of the mace is an icosahedron with 18 individual spikes. Inside the head is a #NeoPixel Jewel that glows bright and animates a color wheel! Full guide: learn.adafruit.com/3d-printed-glowing-mace-prop #diy #Adafruit youtu.be/JaP2hzsd36Q?si=OUarVfMFwNvtSYiI
This project is uses #3DPrinting and #electronics to create a #cosplay prop that lights up. The head of the mace is an icosahedron with 18 individual spikes. Inside the head is a #NeoPixel Jewel that glows bright and animates a color wheel! Full guide: learn.adafruit.com/3d-printed-glowing-mace-prop #diy #Adafruit youtu.be/JaP2hzsd36Q?si=OUarVfMFwNvtSYiI










