Uploaded July 2025 | Updated September 2026, 1 week ago
Meet the brand-new Ortur R2 Laser Engraver – a compact, enclosed beast of a machine that comes ready to roll right out of the box! In this video, I’ll walk you through setting it up (spoiler: it takes minutes), demo all the key features, and show you engraving tests on wood, leather, cork, slate, stainless steel, copper, and more.
My Full Video on Ortur R2 full tests - youtu.be/5dVrMAfnJ3M
Even better? The R2 includes two laser modules – a powerful 20W diode laser for wood and general use, and a 1.3W infrared module designed specifically for engraving on metals.
Whether you’re a total beginner or looking to upgrade your setup, this machine is beginner-friendly but produces professional-grade results.
✅ No assembly required
✅ Fully enclosed with exhaust system
✅ Dual-laser flexibility (metal engraving!)
✅ High-quality results across many materials
✅ Super easy to use!
Stick around to see each material test and I’ll also share the exact settings I used for each one.
🛠 Perfect for woodworking, DIY, and laser engraving enthusiasts who need a compact, powerful, and clean solution in a small shop setup.
Shopping for Ortur R2: bit.ly/3Slwohh
Exclusive Discount Code: CasualDIY
(Note: This code is exclusively for Ortur official website's email subscribers. Enjoy up to $150 off in June, which will adjust to a $50 discount starting in July.)
Disclaimer*:
This product was sent to me free of charge for the purpose of review. However, all opinions, tests, and findings shared in this video are entirely my own and based on my honest experience with the product.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
amazon.co.uk/shop/casualdiy
Shop on Banggood - banggood.com/custlink/DmKdnShFdO
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: patreon.com/casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
paypal.me/TomaszFranczyk
You can find me on:
Instagram - instagram.com/casualdiy
Twitter - twitter.com/CasualDIY
Facebook - facebook.com/CasualDIY
Etsy - etsy.com/uk/shop/CasualDesignTF
Web page - casualdiy.com
Email - casualdiyuk@gmail.com
#LaserEngraving
#OrturR2
#WoodworkingTools
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.
Meet the brand-new Ortur R2 Laser Engraver – a compact, enclosed beast of a machine that comes ready to roll right out of the box! In this video, I’ll walk you through setting it up (spoiler: it takes minutes), demo all the key features, and show you engraving tests on wood, leather, cork, slate, stainless steel, copper, and more.
My Full Video on Ortur R2 full tests - youtu.be/5dVrMAfnJ3M
Even better? The R2 includes two laser modules – a powerful 20W diode laser for wood and general use, and a 1.3W infrared module designed specifically for engraving on metals.
Whether you’re a total beginner or looking to upgrade your setup, this machine is beginner-friendly but produces professional-grade results.
✅ No assembly required
✅ Fully enclosed with exhaust system
✅ Dual-laser flexibility (metal engraving!)
✅ High-quality results across many materials
✅ Super easy to use!
Stick around to see each material test and I’ll also share the exact settings I used for each one.
🛠 Perfect for woodworking, DIY, and laser engraving enthusiasts who need a compact, powerful, and clean solution in a small shop setup.
Shopping for Ortur R2: bit.ly/3Slwohh
Exclusive Discount Code: CasualDIY
(Note: This code is exclusively for Ortur official website's email subscribers. Enjoy up to $150 off in June, which will adjust to a $50 discount starting in July.)
Disclaimer*:
This product was sent to me free of charge for the purpose of review. However, all opinions, tests, and findings shared in this video are entirely my own and based on my honest experience with the product.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
amazon.co.uk/shop/casualdiy
Shop on Banggood - banggood.com/custlink/DmKdnShFdO
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: patreon.com/casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
paypal.me/TomaszFranczyk
You can find me on:
Instagram - instagram.com/casualdiy
Twitter - twitter.com/CasualDIY
Facebook - facebook.com/CasualDIY
Etsy - etsy.com/uk/shop/CasualDesignTF
Web page - casualdiy.com
Email - casualdiyuk@gmail.com
#LaserEngraving
#OrturR2
#WoodworkingTools
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.
