Tomislav Tomasic Woodturning (Dodir Drva) | This is how you upgrade your lathe from scrap WOOD @tomislavtomasicwoodturning | Uploaded January 2024 | Updated October 2024, 3 hours ago.
This is something that we used to do on older lathes when moving banjo was not done using cam action lever.... Hope you'll find this helpfull ☺️
Enjoy
_________________________________________________
MY LATHE
drechslershop.de/en/wood-lathe-killinger-km-1450-se?sPartner=ttw
STEINERT WEBSITE
drechslershop.de/en/?sPartner=ttw
AFFILIATE LINKS
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=269
SCRAPERS - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=268
CRYOGENIC BOWL GOUGES - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=267
WOODCUT PRO CUTTER - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=265
WOODCUT PRO ADVANCE - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=264
IRONS SHEAR SCRAPER - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=263
WOODCUT BOWL SAVER - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=262
________________________________________________
GURTOOL TOOLS
Bowl gouge - https://www.gurtool.cz/gurtool-pm-dutinovy-struh-bez-rukojeti-16-mm-dlouhy-nabrus/
Spindle gouge -https://www.gurtool.cz/vretenovy-struh-bez-rukojeti/
Calipers - https://www.gurtool.cz/hmatadlo/
Sanding pads - https://www.gurtool.cz/unasec/
_______________________________________________
https://www.tobi.si/en
CBN WHEEL
https://www.tobi.si/hr/CBN-brusna-ploca-200mm&tracking=644a469a6d4f4
BENCH GRINDER
https://www.tobi.si/hr/Stolna-dvostruka-brusilica&tracking=644a469a6d4f4
DIAMOND FILE
https://www.tobi.si/hr/Arbortech-diamantna-pila&tracking=644a469a6d4f4
________________________________________________
*disclaimer* Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy
This is something that we used to do on older lathes when moving banjo was not done using cam action lever.... Hope you'll find this helpfull ☺️
Enjoy
_________________________________________________
MY LATHE
drechslershop.de/en/wood-lathe-killinger-km-1450-se?sPartner=ttw
STEINERT WEBSITE
drechslershop.de/en/?sPartner=ttw
AFFILIATE LINKS
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=269
SCRAPERS - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=268
CRYOGENIC BOWL GOUGES - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=267
WOODCUT PRO CUTTER - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=265
WOODCUT PRO ADVANCE - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=264
IRONS SHEAR SCRAPER - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=263
WOODCUT BOWL SAVER - neureiter.idevaffiliate.com/idevaffiliate.php?id=106&url=262
________________________________________________
GURTOOL TOOLS
Bowl gouge - https://www.gurtool.cz/gurtool-pm-dutinovy-struh-bez-rukojeti-16-mm-dlouhy-nabrus/
Spindle gouge -https://www.gurtool.cz/vretenovy-struh-bez-rukojeti/
Calipers - https://www.gurtool.cz/hmatadlo/
Sanding pads - https://www.gurtool.cz/unasec/
_______________________________________________
https://www.tobi.si/en
CBN WHEEL
https://www.tobi.si/hr/CBN-brusna-ploca-200mm&tracking=644a469a6d4f4
BENCH GRINDER
https://www.tobi.si/hr/Stolna-dvostruka-brusilica&tracking=644a469a6d4f4
DIAMOND FILE
https://www.tobi.si/hr/Arbortech-diamantna-pila&tracking=644a469a6d4f4
________________________________________________
*disclaimer* Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy