Uploaded October 2026 | Updated November 2026, 2 days ago
Seeed Studio's reTerminal Sticky is being compared to e-book readers everywhere, but is that all it can do? In this video, we check out what it offers makers like us: the factory firmware, community firmwares, and flashing ESPHome to turn it into a Home Assistant remote for our studio! ๐
reTerminal Sticky is an ESP32-S3 based device with a 3.97" touch E-Paper display, packed in a sleek magnetic casing. It's a consumer-grade product that's still fully open source and programmable.
๐ง Key Specs:
โข ESP32-S3R8 (8MB PSRAM)
โข 3.97" E-Paper display, 800ร480, capacitive touch
โข 2.4GHz WiFi + BLE 5.0
โข Microphone + AI Voice button
โข Temperature & Humidity sensor
โข 3-axis Accelerometer
โข MicroSD card slot
โข 750mAh battery, USB-C charging
โข Built-in magnets + magnetic wall mount
๐ Buy reTerminal Sticky:
๐ Dear Sachin! Great to see your video about Sticky is live. I really enjoyed watching it.
YAML File - github.com/techiesms/reTerminal-Sticky-Home-Assistant-Touch-Panel-ESPHome-/tree/main
I have just one small request: could you please update the product link in the video description? The current link: ๐ Buy reTerminal Sticky: seeedstudio.com/sticky
Could you replace it with the following affiliate link instead?
seeedstudio.com/reTerminal-Sticky-p-6861.html?sensecap_affiliate=WsITKVq&referring_service=link
๐ Sponsored by Altium
altium.com/in/yt/techiesms
โฑ๏ธ Timestamps:
00:00 Is It Just an E-Reader?
00:17 What is reTerminal Sticky?
01:01 My Agenda
01:24 Unboxing
02:53 Factory Firmware Features
09:12 Other Community Firmwares
10:56 Flashing ESPHome Firmware
14:29 Programming to Control Home Assistant Devices
15:36 Home Assistant Demo
15:56 Conclusion
๐ Learn IoT & ESP32 with our courses: techiesms.graphy.com
๐๏ธ Electronics components: techiesms.com
๐ฌ What would you build with the Sticky? Tell us in the comments!
๐ Like, share & subscribe for more content around Electronics, IoT & AI!
________________________________________________________
๐ฅ ๐ My Video Gear ๐ ๐ฅ
Camera โ Canon 750D
Lens โ 50mm f/1.8 STM: amzn.to/32gqnsi
Key Light โ Godox SL60W: amzn.to/3522mHe
Tripod โ amzn.to/3uNhC4H
Microphone โ Zoom H1N: amzn.to/3Osh12A
Editing โ Final Cut Pro X on MacBook Pro: amzn.to/3vHcSyJ
________________________________________________________
๐ Connect with techiesms Everywhere
โถ๏ธ Main Channel: youtube.com/techiesms
โถ๏ธ Secondary Channel: youtube.com/@sachinsoni2684
๐ธ Instagram: instagram.com/techiesms
๐ฆ Twitter: twitter.com/techiesms
๐ Facebook: facebook.com/techiesms
๐ Website: techiesms.com
techiesms
explore | learn | share
#reTerminalSticky #SeeedStudio #ESPHome #HomeAssistant #ESP32 #EPaper #techiesms
Seeed Studio's reTerminal Sticky is being compared to e-book readers everywhere, but is that all it can do? In this video, we check out what it offers makers like us: the factory firmware, community firmwares, and flashing ESPHome to turn it into a Home Assistant remote for our studio! ๐
reTerminal Sticky is an ESP32-S3 based device with a 3.97" touch E-Paper display, packed in a sleek magnetic casing. It's a consumer-grade product that's still fully open source and programmable.
๐ง Key Specs:
โข ESP32-S3R8 (8MB PSRAM)
โข 3.97" E-Paper display, 800ร480, capacitive touch
โข 2.4GHz WiFi + BLE 5.0
โข Microphone + AI Voice button
โข Temperature & Humidity sensor
โข 3-axis Accelerometer
โข MicroSD card slot
โข 750mAh battery, USB-C charging
โข Built-in magnets + magnetic wall mount
๐ Buy reTerminal Sticky:
๐ Dear Sachin! Great to see your video about Sticky is live. I really enjoyed watching it.
YAML File - github.com/techiesms/reTerminal-Sticky-Home-Assistant-Touch-Panel-ESPHome-/tree/main
I have just one small request: could you please update the product link in the video description? The current link: ๐ Buy reTerminal Sticky: seeedstudio.com/sticky
Could you replace it with the following affiliate link instead?
seeedstudio.com/reTerminal-Sticky-p-6861.html?sensecap_affiliate=WsITKVq&referring_service=link
๐ Sponsored by Altium
altium.com/in/yt/techiesms
โฑ๏ธ Timestamps:
00:00 Is It Just an E-Reader?
00:17 What is reTerminal Sticky?
01:01 My Agenda
01:24 Unboxing
02:53 Factory Firmware Features
09:12 Other Community Firmwares
10:56 Flashing ESPHome Firmware
14:29 Programming to Control Home Assistant Devices
15:36 Home Assistant Demo
15:56 Conclusion
๐ Learn IoT & ESP32 with our courses: techiesms.graphy.com
๐๏ธ Electronics components: techiesms.com
๐ฌ What would you build with the Sticky? Tell us in the comments!
๐ Like, share & subscribe for more content around Electronics, IoT & AI!
________________________________________________________
๐ฅ ๐ My Video Gear ๐ ๐ฅ
Camera โ Canon 750D
Lens โ 50mm f/1.8 STM: amzn.to/32gqnsi
Key Light โ Godox SL60W: amzn.to/3522mHe
Tripod โ amzn.to/3uNhC4H
Microphone โ Zoom H1N: amzn.to/3Osh12A
Editing โ Final Cut Pro X on MacBook Pro: amzn.to/3vHcSyJ
________________________________________________________
๐ Connect with techiesms Everywhere
โถ๏ธ Main Channel: youtube.com/techiesms
โถ๏ธ Secondary Channel: youtube.com/@sachinsoni2684
๐ธ Instagram: instagram.com/techiesms
๐ฆ Twitter: twitter.com/techiesms
๐ Facebook: facebook.com/techiesms
๐ Website: techiesms.com
techiesms
explore | learn | share
#reTerminalSticky #SeeedStudio #ESPHome #HomeAssistant #ESP32 #EPaper #techiesms








![We Build AI-Camera using ESP32-S3 and GPT-4o ๐ฅ๐ฅ
In this video, we revisit one of our most exciting projects โ the AI Camera โ and give it a powerful upgrade!
Our first version using ESP32-CAM had issues with stability and performance. So this time, we rebuilt it from scratch using a more powerful and stable hardware โ the MaTouch 2.8 Display with Built-in Camera & SD Card Slot from Makerfabs.
This version of the project lets you:
- Live stream camera feed
- Click an image with a touch
- Type custom questions using an on-screen keyboard
- Send queries to GPT-4o via OpenAI API
- Get AI-generated responses printed on screen
And all of this โ with a custom-built UI, fully programmed keyboard using Arduino GFX, and a neat 3D printed smartphone-style casing!
โญโญ Check out this link to get great discount on Altium365 and also to try out its free trail version - https://www.altium.com/yt/Techiesms
You can support me๐๐ป and also get benefitted on Patreon :- https://www.patreon.com/techiesms
๐จ๐ปโ๐ป Important Links ๐จ๐ปโ๐ป
[Project Purchase Link] AI Camera V2 - https://techiesms.com/product/ai-camera-v2-your-personal-gpt-4o-powered-smart-camera/
You can also purchase Makerfabs Matouch Display with Camera Board based on your location
[For Global Purchase] - https://www.makerfabs.com/matouch-esp32-s3-spi-ips-2-8-with-camera-ov3660.html
[For local purchase in India ] - https://techiesms.com/product/matouch-esp32-s3-with-camera-ov3660-2/
Code used in this video - https://github.com/techiesms/AI-Camera-V2
Using GPT4o API in ESP32 - https://youtu.be/Mp0GPfIBWMs?si=gz_sOhBjpKBEOwgV
Getting Started with Matouch display with Camera board - https://youtu.be/LsTkXnQ0HGE?si=Ye5WHIQMDbZx1W0-
Buy the components for your projects and support techiesms๐ก๐
ESP32 Dev board - https://www.techiesms.com/product/esp32-development-board-doit-devkit-v1/
Seeed Studio XIAO ESP32C3 - https://www.techiesms.com/product/seeed-studio-xiao-esp32c3/
and many more such components are available at https://www.techiesms.com
โฑ Time Stamps โฑ
00:00 Introduction
02:03 How to move ahead with project
02:34 Example Code for Live Streaming
02:54 Example Code for Keyboard
03:15 Creating final code for our project
04:40 Project didnโt work
05:13 We found the actual issue
06:03 The issue with LVGL
06:26 The issue with ArduinoGFX06:59 Explaining Keyboard example code with ArduinoGFX
08:28 Testing ArduinoGFX Keyboard
09:02 Time to go for the Final code
09:30 Explaining the working of the code
15:05 Selecting proper board configurations for Matouch Display
15:37 We designed 3D Printed Casing
16:09 Doing small modifications
16:22 Testing AI Camera Project
20:30 Conclusion
๐ฅ ๐ My Video Gear ๐๐ฅ
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (https://amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (https://amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (https://amzn.to/2I5cdDi)
Tripod - https://amzn.to/3uNhC4H
Microphone - Zoom H1N(https://amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( https://amzn.to/3vHcSyJ )
Get connected with techiesms everywhere..
Subscribe Main Channel :- http://bit.ly/techiesms_youtube
Subscribe Shorts Channel :- https://bit.ly/techiesms_shorts
Facebook :- http://www.facebook.com/techiesms
Twitter :- http://www.twitter.com/imtechiesms
Instagram :- https://www.instagram.com/techiesms/
Website :- http://www.techiesms.com
Telegram - @techiesms
techiesms
explore | learn | share We Build AI-Camera using ESP32-S3 and GPT-4o ๐ฅ๐ฅ](https://i.ytimg.com/vi/v3i-9Ml2p_Q/mqdefault.jpg)

