This DIY Power Bank Is Full of Good Ideas | 1 Min PCB Design Review @AltiumAcademy
This DIY Power Bank Is Full of Good Ideas | 1 Min PCB Design Review  @AltiumAcademy
Uploaded October 2026 | Updated November 2026, 3 days ago
Altium Develop keeps live part data and alternates inside your design and brings manufacturer feedback in early, so details like solder mask clearances get settled before your power bank goes to fab: altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=one-minute-pcb-design-reviews&utm_content=this-diy-power-bank-is-full-of-good-ideas

Tech Consultant Zach Peterson reviews a DIY USB PD power bank in this 1 Min PCB Design Review, and the board is full of good ideas. The schematics and Draftsman document are well documented, every part uses the Part Choices feature, and the four-layer stackup puts two ground planes on the inner layers with no power layer.

Zach also spots a 200 ohm resistor across the USB data lines and wonders if it's there to support charging for legacy USB-A devices. There are fixes, too. A disconnected polygon needs Pour Over All Same Net Objects and a re-pour, and all 47 DRC violations are minimum solder mask clearance errors, so Zach suggests running solder mask sliver checking as an online rule during placement.

๐Ÿ’ก Watch Next:
โ€ข USB Type-C Explained: The One App Note to Read First: youtube.com/shorts/dAZeaFdib3A
โ€ข Fix the Grounding on This Underwater Board | 1 Min PCB Design Review: youtube.com/shorts/blGp7-044vU
โ€ข 262 DRC Violations to Squash | 1 Min PCB Design Review: youtube.com/shorts/kMBC7-5hYg4
โ€ข This STM32 Board Needs a Ground Plane | 1 Min PCB Design Review: youtube.com/shorts/3oIqq9MYQ5w

๐Ÿ”น Connect with Zach:
Want your design reviewed by Zach? Reach out to him on LinkedIn with your design and production files for a chance to be featured on our channel: linkedin.com/in/zachariah-peterson

๐Ÿ’ก Stay Connected:
Don't forget to like, comment, and subscribe for more in-depth tutorials and tips from @AltiumAcademy Share your thoughts and questions in the comments below!

๐Ÿ‘‰ Subscribe for more: youtube.com/@AltiumAcademy?sub_confirmation=1


Don't forget to follow us on social to stay up-to-date on the latest Altium Academy content.

๐Ÿ‘‰ Follow Altium on TikTok: tiktok.com/@altiumdesigner
๐Ÿ‘‰ Follow Altium on Twitter: twitter.com/altium
๐Ÿ‘‰ Follow Altium on Linkedin: linkedin.com/company/altium
๐Ÿ‘‰ Follow Altium on Facebook: facebook.com/AltiumOfficial

The Altium Academy is an online experience created to bring modern education to PCB Designers and Engineers all across the world. Here you can access a vast library of free training and educational content covering everything from basic design to advanced principles and step-by-step walkthroughs. Join industry legends as they share their career knowledge, review real-life design projects, or learn how to leverage one of Altium's leading design tools. No matter your level of experience, the Altium Academy can help you become a better Designer and Engineer!

About Altium LLC
Altium LLC (ASX:ALU), a global software company based in San Diego, California, is accelerating the pace of innovation through electronics. From individual inventors to multinational corporations, more PCB designers and engineers choose Altium software to design and realize electronics-based products.

#altium #pcbdesign #powerbank
This DIY Power Bank Is Full of Good Ideas | 1 Min PCB Design ReviewAltium Training - Schematic Graphics: Adding a RectanglePCB Footprint Basics: Read the Datasheet Before You Place a PadPCB Panelization Tip: The Array Tool Wont Add Mouse Bites for You262 DRC Violations to Squash | 1 Min PCB Design ReviewAltium Training - PCB Layer Stack ManagerAI PCB Design: Turning a 100-Page Spec Into an MCU ShortlistAltium Training - PCB Polygon Pour and Planes: Placing a Polygon PourAfter AI PCB Routing, This Is What Gets Automated NextDIY Flight Controller, Almost Ready to Fly | 1 Min PCB Design ReviewAltium Training - Schematic Updating: Schematic AnnotationAltium Training - PCB Component Placement: Placement of Components
Altium Academy |

This DIY Power Bank Is Full of Good Ideas | 1 Min PCB Design Review

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER