Uploaded September 2026 | Updated November 2026, 3 days ago
Visit our Amazon Affiliate Store: amazon.com/shop/indyfarmlife. This storefront provides links to many of the products we use around the farm.
I'm tired of using a trash pump to drain this flooded area beside my pond. After it held standing water for much of the summer, I'm installing a 6-inch gravity drain with a Hickenbottom inlet to give that water a way out.
This turns into a serious solo project: removing a Bradford pear, clearing the outlet route, digging with my 1987 Case 580K backhoe, checking fall with a laser, and hand-grading the trench before laying the corrugated drain pipe. The John Deere 4052R helps with cleanup and backfilling, but there's still a whole lot of climbing on and off equipment to get this done.
By the end, the pipe is buried, the outlet daylights in the woods, and the inlet has rock and a protective barrier around it. The installation is finished, but the real test will be seeing how it handles the next runoff. The goal is simple: a drier property and no more dragging the trash pump out to empty this low spot.
Next on the list: tackling the leak on the far side of the pond.
What's the biggest project you've tackled by yourself that really needed a second set of hands?
Subscribe to Indy Farm Life for pond projects, drainage work, tractors, equipment repairs, and the real work of taking care of our property.
0:00 Drainage day: clearing the inlet location
1:29 Planning the inlet and moving the tree
2:54 A closer look at the Hickenbottom system
3:49 Digging the first section and planning the grade
5:22 Setting the inlet elevation
6:26 Finding the outlet route
7:50 Measuring the run and available fall
8:29 Digging the trench
9:26 Progress, rain, and calling it a day
11:00 Day two: opening up the outlet
12:04 Hand-grading and compacting the trench
13:24 Finally ready for pipe
15:28 Laying pipe and backfilling
16:49 Getting the pipe covered before dark
18:39 Finished inlet, rock, and debris screening
19:56 Final backfill and the daylight outlet
20:43 Why this project mattered—and the pond leak next
#IndyFarmLife #Drainage #Backhoe
Disclaimer: We participate in affiliate marketing programs and we may receive a small commission for any purchases made through the above links. There is no upcharge to you for this service. We appreciate your support!
Visit our Amazon Affiliate Store: amazon.com/shop/indyfarmlife. This storefront provides links to many of the products we use around the farm.
I'm tired of using a trash pump to drain this flooded area beside my pond. After it held standing water for much of the summer, I'm installing a 6-inch gravity drain with a Hickenbottom inlet to give that water a way out.
This turns into a serious solo project: removing a Bradford pear, clearing the outlet route, digging with my 1987 Case 580K backhoe, checking fall with a laser, and hand-grading the trench before laying the corrugated drain pipe. The John Deere 4052R helps with cleanup and backfilling, but there's still a whole lot of climbing on and off equipment to get this done.
By the end, the pipe is buried, the outlet daylights in the woods, and the inlet has rock and a protective barrier around it. The installation is finished, but the real test will be seeing how it handles the next runoff. The goal is simple: a drier property and no more dragging the trash pump out to empty this low spot.
Next on the list: tackling the leak on the far side of the pond.
What's the biggest project you've tackled by yourself that really needed a second set of hands?
Subscribe to Indy Farm Life for pond projects, drainage work, tractors, equipment repairs, and the real work of taking care of our property.
0:00 Drainage day: clearing the inlet location
1:29 Planning the inlet and moving the tree
2:54 A closer look at the Hickenbottom system
3:49 Digging the first section and planning the grade
5:22 Setting the inlet elevation
6:26 Finding the outlet route
7:50 Measuring the run and available fall
8:29 Digging the trench
9:26 Progress, rain, and calling it a day
11:00 Day two: opening up the outlet
12:04 Hand-grading and compacting the trench
13:24 Finally ready for pipe
15:28 Laying pipe and backfilling
16:49 Getting the pipe covered before dark
18:39 Finished inlet, rock, and debris screening
19:56 Final backfill and the daylight outlet
20:43 Why this project mattered—and the pond leak next
#IndyFarmLife #Drainage #Backhoe
Disclaimer: We participate in affiliate marketing programs and we may receive a small commission for any purchases made through the above links. There is no upcharge to you for this service. We appreciate your support!










