Uploaded June 2016 | Updated September 2026, 6 hours ago
Learn more:
workswell-thermal-camera.com/industrial-thermoinspector
1) Monitoring the temperature distribution of the flame, which is intended for flame treating of plastic parts
2) Temperature is measured in all points of three straight lines.
3) We measure a minimum temperature on each line. It must not fall below the "Criterion value".
4) We can observe the homogeneity of temperature distribution at all points on all straight lines in the chart.
5) Not only minimum and maximum temperatures can be measured on the straight lines, but also a standard deviation, an average temperature and many other parameters.
6) If the measured temperature falls below the minimum value, the system is abel to transmit a signal and then automatically regulate thegas supply to each nozzle. This way we can automatically ensure that the flame temperature is correct at all measuring points.
#WorkswellThermoInspector #InfraredOnYourSide #Workswell
#MadeByWorkswell #ThermalImaging
Learn more:
workswell-thermal-camera.com/industrial-thermoinspector
1) Monitoring the temperature distribution of the flame, which is intended for flame treating of plastic parts
2) Temperature is measured in all points of three straight lines.
3) We measure a minimum temperature on each line. It must not fall below the "Criterion value".
4) We can observe the homogeneity of temperature distribution at all points on all straight lines in the chart.
5) Not only minimum and maximum temperatures can be measured on the straight lines, but also a standard deviation, an average temperature and many other parameters.
6) If the measured temperature falls below the minimum value, the system is abel to transmit a signal and then automatically regulate thegas supply to each nozzle. This way we can automatically ensure that the flame temperature is correct at all measuring points.
#WorkswellThermoInspector #InfraredOnYourSide #Workswell
#MadeByWorkswell #ThermalImaging
