Uploaded November 2026 | Updated November 2026, 3 hours ago
Spray Can Storage is $10 this weekend, was $15. No code needed. Ends Sunday, Nov 1 at 11:59 PM ET aglimpseinside.org
I took an ugly, run of the mill glass top table from a big box store, 48 by 48, and instead of hauling it off, I covered it. The fix is a custom CNC carved top that drops right over the glass, a tessellation grid of puzzle pieces with a thick border around the edge. That border is the trick. It makes the top read like a thick, heavy slab, and it is really just an illusion. Underneath, the cheap glass table is still sitting there doing the work.
In this video I design the puzzle grid, carve the top on the CNC, fit it over the glass, build the border that sells the thickness, and finish it out. If you have a boring table you are tired of looking at, this is a way to keep the sturdy base and change everything people actually see.
Shop our French cleat organization and plans:
aglimpseinside.org
TotalBoat epoxy and finishes, my affiliate link:
totalboat.com/AGlimpseInside
The tools and supplies I use in the shop, my Amazon storefront:
amazon.com/shop/influencer-822ac1f8
A nod to the folks at Carbon Method. Their BenchNuts are the foam hex stand offs I use to hold work up off the bench for sanding and finishing, simple and they just work:
carbonmethod.com/benchnuts
Support the channel and get the full plans library on Patreon:
patreon.com/aglimpseinsideprojects
Some of the links above are affiliate links. If you buy through them I earn a small commission at no extra cost to you, and it helps keep the shop running. Thank you for watching.
Chris
Chapters
I cannot see inside the edit, so these times are my split of your 15:01 based on the build order. Drag each one to where that section actually starts in Videoshop and YouTube will light the chapters up.
0:00 The ugly glass table
0:45 The plan, hide it in plain sight
1:30 Designing the puzzle tessellation
3:00 CNC carving the top
6:15 First test fit over the glass
7:30 Building the thick border illusion
10:00 Sanding and finishing
12:30 The reveal
14:00 What I would do differently
Spray Can Storage is $10 this weekend, was $15. No code needed. Ends Sunday, Nov 1 at 11:59 PM ET aglimpseinside.org
I took an ugly, run of the mill glass top table from a big box store, 48 by 48, and instead of hauling it off, I covered it. The fix is a custom CNC carved top that drops right over the glass, a tessellation grid of puzzle pieces with a thick border around the edge. That border is the trick. It makes the top read like a thick, heavy slab, and it is really just an illusion. Underneath, the cheap glass table is still sitting there doing the work.
In this video I design the puzzle grid, carve the top on the CNC, fit it over the glass, build the border that sells the thickness, and finish it out. If you have a boring table you are tired of looking at, this is a way to keep the sturdy base and change everything people actually see.
Shop our French cleat organization and plans:
aglimpseinside.org
TotalBoat epoxy and finishes, my affiliate link:
totalboat.com/AGlimpseInside
The tools and supplies I use in the shop, my Amazon storefront:
amazon.com/shop/influencer-822ac1f8
A nod to the folks at Carbon Method. Their BenchNuts are the foam hex stand offs I use to hold work up off the bench for sanding and finishing, simple and they just work:
carbonmethod.com/benchnuts
Support the channel and get the full plans library on Patreon:
patreon.com/aglimpseinsideprojects
Some of the links above are affiliate links. If you buy through them I earn a small commission at no extra cost to you, and it helps keep the shop running. Thank you for watching.
Chris
Chapters
I cannot see inside the edit, so these times are my split of your 15:01 based on the build order. Drag each one to where that section actually starts in Videoshop and YouTube will light the chapters up.
0:00 The ugly glass table
0:45 The plan, hide it in plain sight
1:30 Designing the puzzle tessellation
3:00 CNC carving the top
6:15 First test fit over the glass
7:30 Building the thick border illusion
10:00 Sanding and finishing
12:30 The reveal
14:00 What I would do differently










