The Quickest Way To Mark Out A Hip Rafter @SkillBuilder
The Quickest Way To Mark Out A Hip Rafter  @SkillBuilder
Uploaded September 2026 | Updated November 2026, 3 hours ago
๐Ÿ›’ Get Dan's Ultimate Roofing Square here:
go.skill-builder.uk/dancox

Dan Cox shows how he marks out and fits a hip rafter on a model roof using the Ultimate Roofing Square. He sets the square to the 35 degree pitch, transfers the height above plate across from the common rafter, measures the true length of the hip, then marks the birdsmouth straight off the square. No calculations and no rafter tables, just the square and a pencil.

KEY TAKEAWAYS

- Set the square to the pitch of the roof, in this case 35 degrees, lock it off and it stays set for every cut you need to make on that roof.

- The height above plate comes off the common rafter, measured down from the plumb line on the square, and on this roof that works out at 122mm.

- That same height above plate figure is transferred onto the hip by lining the square up with the plumb cut and bringing it down until it meets the line.

- On a real building the wall plates are rarely spot on, so it pays to physically measure the length of the hip rather than trusting a calculated figure.

- Marking the length with an arc rather than a straight tick gives you a point to slide the square down to, which lands the birdsmouth exactly where it should be.

- Once you've got your point on the plate, the birdsmouth is just drawn round the square, so there's no separate setting out to work through.

Watch more roof pitching with Dan Cox on Skill Builder.

#Carpentry #Roofing #HipRafter #RoofingSquare #SkillBuilder

====================

๐Ÿ‘‡ SUPPORT SB - BECOME A MEMBER
youtube.com/channel/UC9GdB6vG6m6cDAwrTAWXgyg/join

๐Ÿ“ช JOIN OUR NEWSLETTER
skill-builder.uk/signup

๐Ÿ›’ SEE OUR FAVOURITES ON AMAZON
amazon.co.uk/shop/skillbuilder

๐ŸŽง LISTEN TO OUR PODCAST
blubrry.com/skillbuilder/subscribe

๐ŸŽฌ OUR VIDEO LIBRARY
youtube.com/@SkillBuilder/videos

๐Ÿ”— SEE EVERYTHING SB ON LINKTREE
https://linktr.ee/skillbuilder

facebook.com/skillbuilderchannel

tiktok.com/@skillbuilder

instagram.com/skill_builder

(As an Amazon Associate, we earn from qualifying purchases)

====================

OUR FAVOURITE CHARITIES

๐Ÿ‘ท BAND OF BUILDERS
bandofbuilders.org

โ›ฏ THE LIGHTHOUSE CHARITY
lighthousecharity.org

๐Ÿ’ง CHARITY WATER
charitywater.org
The Quickest Way To Mark Out A Hip RafterDryzone Rods - The Damp Proof Course Without Digging!Are Heat Geek Still The Gold Standard Heat Pump Installer?Careers Britain Is Building for the FutureThis Patio More Than Doubled In SizeA Few Moments of Bricklaying Calm #shortsSingle-Storey Extension Start to Finish: Foundation Fails to Beautiful BuildThe Membrane Mistake Causing Loft CondensationIs This The End of Plumbing As We Know It?Why This Tiny Valve Causes So Many LeaksNo Radiators, No Underfloor: The Skirting Heating System on a Real JobThis Simple DIY Job Makes a Massive Difference!
Skill Builder |

The Quickest Way To Mark Out A Hip Rafter

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER