Uploaded November 2026 | Updated November 2026, 2 days ago
This lid fit impressively poorly after the reduction glaze firing. It’s rare it’s this extreme, the lid wouldn’t even slot inside the body after being cracked off, the waddings chipped away. Here’s another lesson and indicator that the rim section of the body was again, trimmed too finely, it looks like I need to add even more material to the initial lump the jar was thrown with.
This grinding process is long. I typically work on an entire kiln loads worth at a time, some 25-45 lidded forms and they can vary, some being immensely deep time sinks, whilst others only take 1-2 minutes to get the slight grittiness worn away.
For this jar though, there was at least a millimetre’s worth of stoneware to grind back, hence the second polishing on the wheel to try and get it sitting really flush. The reason, by the way, that I don’t use the wheel for the entirety of the grinding process is that you don’t have much control when twisting the parts together that way. I can apply downward pressure sure, but when I hold the two pieces, I can apply pressure in different directions and I can apply far more softly, which helps me not crack pots and break them.
I’ll have a handful of these available in my upcoming shop restock at the end of the month, stay tuned for the date announcement!
#oddlysatisfying #craft #asmr #pottery #ceramics
This lid fit impressively poorly after the reduction glaze firing. It’s rare it’s this extreme, the lid wouldn’t even slot inside the body after being cracked off, the waddings chipped away. Here’s another lesson and indicator that the rim section of the body was again, trimmed too finely, it looks like I need to add even more material to the initial lump the jar was thrown with.
This grinding process is long. I typically work on an entire kiln loads worth at a time, some 25-45 lidded forms and they can vary, some being immensely deep time sinks, whilst others only take 1-2 minutes to get the slight grittiness worn away.
For this jar though, there was at least a millimetre’s worth of stoneware to grind back, hence the second polishing on the wheel to try and get it sitting really flush. The reason, by the way, that I don’t use the wheel for the entirety of the grinding process is that you don’t have much control when twisting the parts together that way. I can apply downward pressure sure, but when I hold the two pieces, I can apply pressure in different directions and I can apply far more softly, which helps me not crack pots and break them.
I’ll have a handful of these available in my upcoming shop restock at the end of the month, stay tuned for the date announcement!
#oddlysatisfying #craft #asmr #pottery #ceramics










