Uploaded August 2021 | Updated September 2026, 2 days ago
Reinforce your FX3 and FX30 Top Handle and add any accessory imaginable with this 3D Printed audio cage. We fixed the weak attachment of the original Audio Handle (ILME-FX3) on the Sony FX3 using durable 3D Printed parts. Thank you to our awesome community for your feedback and support while creating this design!
Get the Sony FX3 Audio Cage V3:
cliffandkajun.com/store?category=Camera+Accessories 🔥🔥🔥
Etsy Listing Here:
etsy.me/3A5psK2 🔥🔥🔥
Detailed installation INSTRUCTIONS here:
youtu.be/4O_W2U7c4YQ
OR for photos go here:
cliffandkajun.com/guide 🔥🔥🔥
=================
Recommended hardware: (All stainless steel)
Bolts for cheese plates (4) 1/4 20 amzn.to/3fmvGxe
Jam (low profile) nuts for external attachments (6) 1/4 20 amzn.to/3yoiDCJ
Installation screws:
(2) #6-32 1” MACHINE SCREWS
amzn.to/3zYDBZg
(2) #6-32 NUTS
amzn.to/2ViaukT
(1) 1/4 20 3/4” bolt (Flat head tapered) amzn.to/3xmiPkL
(1) Jam (or full size) nut for external attachments (6) 1/4 20
Extra screws for Smallrig Cold Shoe amzn.to/3ijcOks
============
Cold shoe Mount: (Purchase separately here: amzn.to/3loO2Bj)
The hole spacing is approximately 18mm and 46 mm (Canon C200 plate). The one used in the photo can be found here:
Cheese Plate (Bar) on Amazon
______________________
The best printers and Filament:
Ender 3 V2 Printer: (Or Ender 3 Pro) (Budget Option)
amzn.to/356Iy55
Prusa Mk3s Printer (Production option - what we use)
shop.prusa3d.com/en/51-original-prusa-i3-mk3s
PETG (with stick on adhesion bed)
amzn.to/356uiJh
SETTINGS:
Layer height 0.15mm
Shell 1.6mm
Fill 100%
Print Speed 70 mm/s
Head Temp 245c
Bed Temp 70c
No support
Raft platform
1.75mm PETG amzn.to/356uiJh
Flow 100%
Nozzle 0.4mm
We also use blue painters tape for the best bed adhesion, or if you use the filament above, it includes a stick on bed cover that works perfectly.
______________________
What we used:
Affiliate links pay a very small commission but do not cost you any extra, and they help!
Camera:
Sony FX3 -
https://hotrodcameras.com/sony-fx3-fu...
Sony A7iii - amzn.to/2UEqfig
Lenses:
Irix 45mm Cine Lens (Full Frame) - amzn.to/3ePFSOI
Sony 20mm f1.8 (Full Frame) - amzn.to/2UFFKGy
Sony 35mm f1.8 (Full Frame) - amzn.to/2Srp0Fb
Monitors:
Desview R5 - amzn.to/35Nfkt8
Lighting:
Godox VL150 (Background / Hair light) - amzn.to/38UpUAt 🔥🔥🔥
Godox VL200 (Fill Light) - amzn.to/37sb6rc 🔥🔥🔥
Godox VL300 (Key Light) - amzn.to/3bjnpaj 🔥🔥🔥
Nanlite Pavotube 30c
NiceFoto 48" softbox with grid - amzn.to/3fdjuNK 🔥🔥🔥
Audio:
Rode NTG series
Focusrite Scarlett Solo audio interface
Rode VideoMicro
Zoom H6
Zoom F1 Field Recorder
Software:
Adobe Premiere Pro CC
Adobe After Effects
Photoshop CC (Thumbnail):
Phantom LUTs
The most important tools:
Espresso Machine:
Francis Francis! X5 by Luca Trazzi
Coffee:
World Market Island Blend🔥
Reinforce your FX3 and FX30 Top Handle and add any accessory imaginable with this 3D Printed audio cage. We fixed the weak attachment of the original Audio Handle (ILME-FX3) on the Sony FX3 using durable 3D Printed parts. Thank you to our awesome community for your feedback and support while creating this design!
Get the Sony FX3 Audio Cage V3:
cliffandkajun.com/store?category=Camera+Accessories 🔥🔥🔥
Etsy Listing Here:
etsy.me/3A5psK2 🔥🔥🔥
Detailed installation INSTRUCTIONS here:
youtu.be/4O_W2U7c4YQ
OR for photos go here:
cliffandkajun.com/guide 🔥🔥🔥
=================
Recommended hardware: (All stainless steel)
Bolts for cheese plates (4) 1/4 20 amzn.to/3fmvGxe
Jam (low profile) nuts for external attachments (6) 1/4 20 amzn.to/3yoiDCJ
Installation screws:
(2) #6-32 1” MACHINE SCREWS
amzn.to/3zYDBZg
(2) #6-32 NUTS
amzn.to/2ViaukT
(1) 1/4 20 3/4” bolt (Flat head tapered) amzn.to/3xmiPkL
(1) Jam (or full size) nut for external attachments (6) 1/4 20
Extra screws for Smallrig Cold Shoe amzn.to/3ijcOks
============
Cold shoe Mount: (Purchase separately here: amzn.to/3loO2Bj)
The hole spacing is approximately 18mm and 46 mm (Canon C200 plate). The one used in the photo can be found here:
Cheese Plate (Bar) on Amazon
______________________
The best printers and Filament:
Ender 3 V2 Printer: (Or Ender 3 Pro) (Budget Option)
amzn.to/356Iy55
Prusa Mk3s Printer (Production option - what we use)
shop.prusa3d.com/en/51-original-prusa-i3-mk3s
PETG (with stick on adhesion bed)
amzn.to/356uiJh
SETTINGS:
Layer height 0.15mm
Shell 1.6mm
Fill 100%
Print Speed 70 mm/s
Head Temp 245c
Bed Temp 70c
No support
Raft platform
1.75mm PETG amzn.to/356uiJh
Flow 100%
Nozzle 0.4mm
We also use blue painters tape for the best bed adhesion, or if you use the filament above, it includes a stick on bed cover that works perfectly.
______________________
What we used:
Affiliate links pay a very small commission but do not cost you any extra, and they help!
Camera:
Sony FX3 -
https://hotrodcameras.com/sony-fx3-fu...
Sony A7iii - amzn.to/2UEqfig
Lenses:
Irix 45mm Cine Lens (Full Frame) - amzn.to/3ePFSOI
Sony 20mm f1.8 (Full Frame) - amzn.to/2UFFKGy
Sony 35mm f1.8 (Full Frame) - amzn.to/2Srp0Fb
Monitors:
Desview R5 - amzn.to/35Nfkt8
Lighting:
Godox VL150 (Background / Hair light) - amzn.to/38UpUAt 🔥🔥🔥
Godox VL200 (Fill Light) - amzn.to/37sb6rc 🔥🔥🔥
Godox VL300 (Key Light) - amzn.to/3bjnpaj 🔥🔥🔥
Nanlite Pavotube 30c
NiceFoto 48" softbox with grid - amzn.to/3fdjuNK 🔥🔥🔥
Audio:
Rode NTG series
Focusrite Scarlett Solo audio interface
Rode VideoMicro
Zoom H6
Zoom F1 Field Recorder
Software:
Adobe Premiere Pro CC
Adobe After Effects
Photoshop CC (Thumbnail):
Phantom LUTs
The most important tools:
Espresso Machine:
Francis Francis! X5 by Luca Trazzi
Coffee:
World Market Island Blend🔥
