Uploaded October 2025 | Updated September 2026, 18 hours ago

---

Two updates in one quick check‑in! First, an EcoFlow direct battery hack progress report focused on doing it the safe way.

Instead of showing risky DIY cables, I’m building an OEM‑cable hub with power disconnect, proper fusing, and an Anderson output—plus a 12V/30A high‑current output.

Second, a big surprise: my whole home is about to go solar.

EcoFlow Hack (Safety‑First):

Using OEM battery cables (no exposed terminals)
Project box hub with on/off, fuses, bus bars, and Anderson output
Targeting a clean 12V/30A rail for high‑draw 12V devices

I’ll share the final tested parts list so you don’t waste time or money


Who and what would I choose for my own home to go solar?

On the roof right now we will find
K2 + IronRidge racking, Tigo optimizers for rapid shutdown compliance
What about the heart though?

Something that has 200A service pass‑through with a service‑rated disconnect
Something that can handle an East/West roof with 40+ 420w panels total
Something I trust, and will scale with my needs?

Watch to find out!

Question of the day: Which whole‑home system would you choose? Drop your answer in the comments!

If you’re into DIY solar, power stations, and smart power builds, subscribe for the deep‑dive videos as soon as the system is live.