Uploaded June 2019 | Updated November 2026, 2 hours ago
I started this project back around deer season. My family gave me a deer hide which i de-haired and fleshed. I stretched it on a wooden frame i put together. I dryed it out and managed to cut 6 circles out of it which would be the drum heads, the 3 largest are 13 inches an they go down in size - the smallest being just 6 inches. I had some slabs of wood that i managed to cut out rings of wood for the drums hoop. This was a very hard process with my jigsaw and i broke one of my best Bosch blades..sadness...but i managed to cut all the hoops. I punched holes in the circles; laced bank line threw it and stretched it over the hoop. My fingers werent strong enough to pull the skin with the rawhide strips so i pulled the skin over the hoop and secured it with tacks. I did this twice, each time removing the skin and resoaking it to be able to stretch it. Once it was ready i removed the tacks and laced it to the hoop with strips of deer rawhide. The drum beater is a one and a half inch wooden ball with a dowel attached , then covered with deer hide and tied with leather thong. This was absolutely one of the hardest projects i've ever done.
I started this project back around deer season. My family gave me a deer hide which i de-haired and fleshed. I stretched it on a wooden frame i put together. I dryed it out and managed to cut 6 circles out of it which would be the drum heads, the 3 largest are 13 inches an they go down in size - the smallest being just 6 inches. I had some slabs of wood that i managed to cut out rings of wood for the drums hoop. This was a very hard process with my jigsaw and i broke one of my best Bosch blades..sadness...but i managed to cut all the hoops. I punched holes in the circles; laced bank line threw it and stretched it over the hoop. My fingers werent strong enough to pull the skin with the rawhide strips so i pulled the skin over the hoop and secured it with tacks. I did this twice, each time removing the skin and resoaking it to be able to stretch it. Once it was ready i removed the tacks and laced it to the hoop with strips of deer rawhide. The drum beater is a one and a half inch wooden ball with a dowel attached , then covered with deer hide and tied with leather thong. This was absolutely one of the hardest projects i've ever done.










