Uploaded May 2025 | Updated September 2026, 2 hours ago
Welcome to the complete beginner’s guide and in-depth review of the Creality Raptor Pro 3D scanner!
In this video, I take you through my entire workflow—from unboxing and calibrating the scanner, to scanning real-world objects using Creality Scan software, combining multiple scans, processing the models, and finally importing the model into Fusion 360 for CAD design.
Whether you’re just getting started with 3D scanning or you're wondering if the Raptor Pro can handle serious design work, this video shows what it’s really capable of—no fluff, just a full hands-on walkthrough.
🔍 What You’ll Learn:
📦Unboxing and first setup
📏Calibration and scanning tips
☯️Combining and cleaning scans
🧽Mesh post-processing using Meshmixer and Instant Meshes
💾Exporting and using your scan in Fusion 360
😇My honest thoughts after using it end-to-end
🙏Huge thanks to @Creality3DScanner for sending me the Raptor Pro for this in-depth video!
🛒Creality Raptor Pro 3D Scanner:
store.creality.com/ca/products/creality-raptor-pro?utm_source=FishFly&utm_medium=YouTube&utm_campaign=Leckiestein
Instant Meshes
github.com/wjakob/instant-meshes
✅Raptor Pro 3D Scanner Key Advantages:
22 Cross Laser Lines
7 Parallel Laser Lines
NIR Structured Light
High Scanning Speed: Up to 60fps, 660,000 points/s, and 60fps under laser scan mode
Volumetric Accuracy: 0.02mm + 0.08mm/m
Supports Objects Between: 0.2-157" (5-4000mm)
Scans Black/Metal Objects Without Sprays
NIR Scanning: Up to 30fps with 24-bit full-color scanning
Hashtags:
#Creality #Creality3DScanner #3dscanning #3dmodel #3dscanner #RaptorPro
🔻🎶
"Ryan Little - Lucy's Song" is under a Creative Commons (BY-NC-SA 3.0) license:
creativecommons.org/licenses/by-nc-sa/3.0
soundcloud.com/iamryanlittle
• [No Copyright Music] Ryan Little
youtube.com/watch?v=dl_sq8zrtmo&list=PLBgpmvY2D8d0yr0xMCsHMMp1p74jaB_3I
youtube.com/watch?v=v5jeWgiR9Kw
🔺🎶
Intro | 0:00 |
Unboxing | 1:13 |
Scanner Specs | 4:13 |
Testing Criteria | 6:14 |
Calibration | 8:04 |
Laser Scanning Settings | 10:11 |
About Markers | 11:21 |
Out-of-the-box Scanning Test | 17:24 |
Using Scan Spray Test | 20:25 |
Processing Point Cloud Data | 21:13 |
Multi-scans | 24:08 |
Capturing Local Detail | 25:50 |
Merging Multiple Scans | 27:50 |
Model Exporting From CR Scan | 29:25 |
Processing The Exported Mesh | 31:06 |
Working With The Model In Fusion 360 | 33:41 |
Raptor Pro - Pros and Cons | 36:33 |
Final Thoughts | 39:13 |
Welcome to the complete beginner’s guide and in-depth review of the Creality Raptor Pro 3D scanner!
In this video, I take you through my entire workflow—from unboxing and calibrating the scanner, to scanning real-world objects using Creality Scan software, combining multiple scans, processing the models, and finally importing the model into Fusion 360 for CAD design.
Whether you’re just getting started with 3D scanning or you're wondering if the Raptor Pro can handle serious design work, this video shows what it’s really capable of—no fluff, just a full hands-on walkthrough.
🔍 What You’ll Learn:
📦Unboxing and first setup
📏Calibration and scanning tips
☯️Combining and cleaning scans
🧽Mesh post-processing using Meshmixer and Instant Meshes
💾Exporting and using your scan in Fusion 360
😇My honest thoughts after using it end-to-end
🙏Huge thanks to @Creality3DScanner for sending me the Raptor Pro for this in-depth video!
🛒Creality Raptor Pro 3D Scanner:
store.creality.com/ca/products/creality-raptor-pro?utm_source=FishFly&utm_medium=YouTube&utm_campaign=Leckiestein
Instant Meshes
github.com/wjakob/instant-meshes
✅Raptor Pro 3D Scanner Key Advantages:
22 Cross Laser Lines
7 Parallel Laser Lines
NIR Structured Light
High Scanning Speed: Up to 60fps, 660,000 points/s, and 60fps under laser scan mode
Volumetric Accuracy: 0.02mm + 0.08mm/m
Supports Objects Between: 0.2-157" (5-4000mm)
Scans Black/Metal Objects Without Sprays
NIR Scanning: Up to 30fps with 24-bit full-color scanning
Hashtags:
#Creality #Creality3DScanner #3dscanning #3dmodel #3dscanner #RaptorPro
🔻🎶
"Ryan Little - Lucy's Song" is under a Creative Commons (BY-NC-SA 3.0) license:
creativecommons.org/licenses/by-nc-sa/3.0
soundcloud.com/iamryanlittle
• [No Copyright Music] Ryan Little
youtube.com/watch?v=dl_sq8zrtmo&list=PLBgpmvY2D8d0yr0xMCsHMMp1p74jaB_3I
youtube.com/watch?v=v5jeWgiR9Kw
🔺🎶
Intro | 0:00 |
Unboxing | 1:13 |
Scanner Specs | 4:13 |
Testing Criteria | 6:14 |
Calibration | 8:04 |
Laser Scanning Settings | 10:11 |
About Markers | 11:21 |
Out-of-the-box Scanning Test | 17:24 |
Using Scan Spray Test | 20:25 |
Processing Point Cloud Data | 21:13 |
Multi-scans | 24:08 |
Capturing Local Detail | 25:50 |
Merging Multiple Scans | 27:50 |
Model Exporting From CR Scan | 29:25 |
Processing The Exported Mesh | 31:06 |
Working With The Model In Fusion 360 | 33:41 |
Raptor Pro - Pros and Cons | 36:33 |
Final Thoughts | 39:13 |
