The 2022 #townsbowiebuildoff Begins! @SamTownsBladesmith
The 2022 #townsbowiebuildoff Begins!  @SamTownsBladesmith
Uploaded October 2022 | Updated November 2026, 3 hours ago
Good luck to everyone competing! Rules and links below:

Main competition rules:

Your build must feature the following:

-A blade longer than 8 inches from the tip to the front of the guard
-A guard with both a top and bottom quillon
-A "swedge" or "clip" (a shorter second bevel towards the spine, normally around 1/3 the blades length.
-A "sparring bar" (a pronounced part of the spine of the knife, normally made of a softer material, reputedly for "catching" opponent's blades whilse fighting

Beginner's Bracket:

In order to enter this bracket you must have only been making knives for less than two years. other forms of craftsmanship do not count toward this.

Your build must include:

-A blade longer than 8 inches from the tip to the beginning of the guard or bolster
-A guard or bolster made of a separate material from the handle that may feature two, one or no quillons
-A "swedge" or "clip" (a shorter second bevel towards the spine, normally around 1/3 the blades length.

ALL ENTRIES MUST BE SUBMITTED VIA EMAIL TO

Samtownsbladesmith@gmail.com

BY NOVEMBER 30TH AT 12PM AWST (GMT +8)

Entries must feature at least three (3) images, one of which must be a well lit, full profile photo including a ruler or tape measure to confirm parameters have been followed.

Any and all questions can be sent to my email or to me @samtownsbladesmith on Instagram

Thankyou to Nordic Edge: https://www.nordicedge.com.au

and

Otway Fiddleback: @otwayfiddleback

For donating prizes for this competition!

........

Support me on Patreon:

patreon.com/samtownsbladesmith

Donate through PayPal:

paypal.me/SamTownsSmith

My Amazon Wishlist
https://www.amazon.com.au/hz/wishlist/ls/1WXB9JHCZJ8TZ?ref_=wl_share

Check out my Etsy store:

etsy.com/au/shop/samtownsbladesmith

Check out my Twitch:

twitch.tv/samtownsbladesmith

Merch available through:

redbubble.com/people/samtownsblades/shop






Created by InShot:inshotapp.page.link/YTShare
The 2022 #townsbowiebuildoff Begins!Relining a Postbox ForgeForging Ergonomic Medieval Style CutleryChalk Talks: Blade Geometry Vs. Sharpness!Saturday Smithing Stream: Forging... Spring Shears Pt.1Saturday Smithing Stream: 48 Hour Dagger Damascus Prep[KNIFEMAKING] Handsanding ShenanigansSaturday Smithing Stream: Cross Pein ForgingHow to Forge a Wrought Iron and Steel  Brokenback SeaxSaturday Smithing Stream: Forging A FlatterWorking on the Dragon HammerSword Design Stream
Sam Towns, Bladesmith |

The 2022 #townsbowiebuildoff Begins!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER