Support / UP Box / Replacing the X-Connecting Rod 3dprintingsystems 2016-09-23 | This is an UP BOX support video on how to replace the X-connecting Rod, belt and X-connecting bearing clip.Related videos:Prints skipping on your UP BOX? Check your X & Y axis first: youtu.be/hjD8_xhC89QDownload the Test Column here: goo.gl/lfqysS
Emblaser 2 10w 3dprintingsystems 2022-09-14 | Cutting 5/8" / 16mm pine with the new 10-watt Laser Diode upgrade for the Emblaser 2
EinScan HX - 3D scan mesh to flat surface Fusion 360 3dprintingsystems 2021-11-04 | This quick video shows importing a 3D scan of the rear of a Toyota car, to design a floor mat.
Introducing the X5 3D Printer - Continuous Printing 3dprintingsystems 2019-03-06 | TierTime's newest 'beastly' 3D printer the X5 utilises what we call "Contin-U-Print". It lets you queue up to 8 prints, print them out one after the other without you having to come and change the perfboard.Don't forget to Like, Comment and Subscribe to our channel. Happy Printing!
EinScan Pro 2X 3D Scanner 3dprintingsystems 2018-11-28 | Preview of the new Shining 3D EinScan Pro 2X 3D Scanner
Introducing LightBurn for Emblaser 2 3dprintingsystems 2018-02-12 | LightBurn is the new software package for the Emblaser range.This update is for existing Emblaser customers currently using LaserWeb or Cut2D-Laser and would like use LightBurn.You will receive a license key which unlocks the trial version of LightBurn and provides Emblaser support.To upgrade to LightBurn, please visit the link down belowhttp://store.3dprintingsystems.com/software/lightburn-software
UP Studio v2.1.0.8 - Basic Settings 3dprintingsystems 2018-01-12 | Want to know how to be printing like a pro without the hassle? We've got you covered with this video as we'll be going through some of the basic settings on the UP Studio.Ready for the advanced settings? Head over to youtu.be/OROKzVWvCMcDon't forget to Like, Comment and Subscribe to our channel. Happy Printing!
UP Studio v2.1.0.8 - Advance Settings 3dprintingsystems 2018-01-12 | Not sure what some of the features do? Don't worry, in this video we dive a bit deeper into the advanced features that will allow you to really fine tune your print settings.Don't forget to Like, Comment and Subscribe to our channel. Happy Printing!
Using the UP Studio v2.1.0.8 3dprintingsystems 2018-01-12 | UP Studio is constantly being updated with the latest features, to make 3D printing a better experience for users.Check out our quick overview on the new and improved UP Studio.For more on the UP Studio:Basic Settings youtu.be/MLbK8BLZykIAdvanced Settings youtu.be/OROKzVWvCMcDon't forget to Like, Comment and Subscribe to our channel. Happy Printing!
EinScan SP // Project 2: What floats? Boats, Goat...Corn? 3dprintingsystems 2017-10-24 | This week, we will work with the EinScanSP to create a corn boat.What you will need:- EinScan SP 3D Scanner- Playdoh or clay- Your fave veggieIf you like this video, please hit the Like button, Share or Subscribe to our channel.
Introduction to your new Emblaser 2 Laser Cutter & Engraver 3dprintingsystems 2017-10-12 | A brief overview of what's in the box and its features.
Emblaser 2 // Project 1: Spirograph 3dprintingsystems 2017-09-25 | The first of our new Project series, where we bring to you small DIY projects to do, using your machines. This week, we will work with the Emblaser 2 Laser Cutter & Engraver to create a spirograph.What you will need:- Emblaser 2 Laser cutter & engraver- Spirograph SVG file downloaded here goo.gl/aqu4Qq- 3mm Plywood (at least 110x110mm)- LaseWeb sofware with the Material Database loaded. goo.gl/SKq7DZ goo.gl/bZzgQ9If you like this video, please hit the Like button, Share or Subscribe to our channel.
MoonRay - UV DLP 3D Printer 3dprintingsystems 2017-09-24 | Accuracy and detail are key to those in the dental & jewellery industries. That's why the MoonRay resin printer and it's intuitive DLP technology makes it ideal for such use.
FreeScan by Shining 3D 3dprintingsystems 2017-09-23 | Industrial 3D Scanning using the new FreeScan X7
Emblaser 2: LaserWeb Software Overview 3dprintingsystems 2017-05-18 | A quick guide on how to navigate and use LaserWeb.LaserWeb is an open source software that is compatible with your Emblaser 2 Laser Cutter and Engraver.Documentation: http://cncpro.co/index.php/39-documentationLearn how to get image files ready for cutting and engraving.Learn how to use 123D Make to create pieces that can be assembled. Take 3D models and convert into a 2D format that can be laser cut into patterns and then assembled back into 3D form.
Support / UP Mini 2 / Cleaning the Drive Gear 3dprintingsystems 2016-10-05 | This is an UP Mini 2 support video on how to access and clean the drive gear on your UP Mini 2 Print Head
Support / UP Mini 2 / UP Mini 2 Setup - Getting ready for your first print 3dprintingsystems 2016-09-30 | This is an UP Mini 2 support video on how to setup your 3D printer for a print job. Watch UP Studio Software overview: youtu.be/Ksem3NVTWiA
Support/General/UP Studio Software Overview 3dprintingsystems 2016-09-29 | This is a general overview of the UP Studio Software which is used with your UP printer.Watch UP BOX Manual-levelling: youtu.be/qpe_zQQtO6U
Support / UP Plus 2 / How to swap extruder assembly on UP Plus 2 & UP Mini 3dprintingsystems 2016-09-29 | A short how-to video for swapping a faulty extruder assembly in the print head of an UP Plus 2 or UP Mini 3D printer.
Support / UP Box / Extruder not heating properly? Guide to replacing the Extruder FFC cable 3dprintingsystems 2016-09-28 | This is an UP BOX support video on how to replace the Extruder FFC Cable and other related circuit boards.
Support / UP Box / Broken auto level switch or throwing an error? Replace the Auto-Level Servo 3dprintingsystems 2016-09-28 | This is an UP BOX support video on how to replace the Auto-Level Servo.
Support / UP Box / Troubleshooting Y-Axis Error - Pt.2 - Replacing the black FFC cable 3dprintingsystems 2016-09-23 | This is an UP BOX support video on how to replace the black FFC cable when there is an Y-axis error.PART 1. HERE youtu.be/jG7cvfIaTHURelated videos:Prints skipping on your UP BOX? Check your X & Y axis first: youtu.be/hjD8_xhC89QReplacing the X-Connecting Rod: youtu.be/TH1llUPfrpg
Support / UP Box / Troubleshooting Y-Axis Error - Pt.1 - Replacing the Y-limit switch 3dprintingsystems 2016-09-23 | This is an UP BOX support video on how to replace the y-limit switch when there is an Y-axis error.PART 2. HERE youtu.be/XdcX8vaE7-cRelated video:Prints skipping on your UP BOX? Check your X & Y axis first: youtu.be/hjD8_xhC89QReplacing the X-Connecting Rod: youtu.be/TH1llUPfrpg
Support / UP Box / Nozzle too close? Too far away? Tips to adjusting nozzle height 3dprintingsystems 2016-09-21 | This is an UP BOX support video on how to adjust the nozzle height if your models are lifting or model removal from the perfboard is too difficult.UP BOX Manual Levelling video: youtube.com/watch?v=qpe_zQQtO6UDownload these files to test the nozzle height.20mm Cube STL file: goo.gl/ceIo8iBorder STL file: goo.gl/kYsWfd
Support / UP Box / Manual levelling your UP BOX 3D printer 3dprintingsystems 2016-09-20 | If you have lifting or warping on one side of your bed, or getting a dust filled drive gear. It's recommend to manually level your print bed on your UP BOX. This video shows you how to do this. **REUPLOAD**
Blocked extruder column or failed extruder block? Time to replace the extruder block assembly 3dprintingsystems 2016-09-19 | This is an UP BOX support video on how to replace the extruder block assembly.
Support / UP Box / Changing the nozzle on your UP BOX 3D Printer 3dprintingsystems 2016-09-19 | It's good to keep a few spare nozzles on hand to reduce printing downtime. REMEMBER!! Always heat up the extruder block first before you attempt to remove the nozzle.
Bunker - Your 3D printers perfect companion 3dprintingsystems 2016-09-12 | Short teaser video for the filament Bunker available now on Kickstarter
Support / UP Box / Platform not heating? How to fix platform heating issues. 3dprintingsystems 2016-09-10 | This support video is for the UP BOX 3D printer on how to fix platform heating issues.
Support / UP Box / Prints skipping? Check your X & Y axis first 3dprintingsystems 2016-09-10 | This is an UP BOX support video on what to check for if your prints have skipping lines on them.
Support / UP Box / Blocked print head? Clean out the drive gear first 3dprintingsystems 2016-09-10 | If you think you have a blocked drive gear, it's best to clean out the drive gear first on your UP 3D printer.
Bunker, Smart Filament Storage System : Kickstarter Update #1 3dprintingsystems 2016-09-09 | This is our very first update to our KickStarter project Filament Bunker.Woohoo 200 backers!
Bunker : Your 3D printers perfect companion 3dprintingsystems 2016-09-08 | The problem being addressed by this device is that of filament management. There are multiple issues in handling filament used in desktop 3D printers, including: No method to detect “out of filament”No way to detect filament stoppage (“air printing”)No easy way to control the environment containing the filamentAnd many more. kickstarter.com/projects/filamentbunker/bunker-your-3d-printers-perfect-companionhttp://www.fabbaloo.com/blog/2016/9/7/could-the-bunker-be-a-transformational-3d-printing-product
Support / UP Box / Lubricating your 3D printer 3dprintingsystems 2016-09-07 | Having a well tuned UP 3D printer will provide your many years of service, so best to do some self maintenance to keep your 3D printer in ship-shape.
Support / UP Box / What are the different types of print platforms? 3dprintingsystems 2016-09-07 | Perforated vs smooth 3d print beds for UP 3D printers.Perfortaed platform good for printing with ABS or PLASmoothboard with UP Flex, great for printing raftless with PLA or small ABS parts.UP Box 3D printerUP Mini 2 3D printerUP Plus 2 3D printer
WriteBoard - the robot controlled white board 3dprintingsystems 2016-08-09 | For further information refer here:http://store.3dprintingsystems.com/stem-education-kits/WriteBoard
Toyota Engine 3D Print with the UP BOX 3d printer 3dprintingsystems 2016-06-23 | Ajay Keane from 3D Printing Systems3D Print of a Toyota Engine using:Printed on the UP BOX100 micron layer heightUP Burgandy PLAValue Aluminium-likeValue Bronze-likeRubber-like for the beltsModel from: http://www.thingiverse.com/thing:644933
Case Study : How do you use your UP? 3dprintingsystems 2016-06-13 | Customer : The Perpetual Motion Machine Companywww.pmmco.com.au
STEM 3D Kits - MIRA 3dprintingsystems 2016-06-09 | MIRA is taken from designs of industrial 5 axis robots used in assembly and production environments. It takes the excitement of the robotics industry and provides an excellent entry in the programming and design of industrial robotics and 3d printing. MIRA makes an excellent teaching + 3d print resource for the classroom. Each pack includes:Step by step manual.Operation and programming guide.Background reference materials on 3d printing & robotics.3D printing template files in .STL format.Required components, fasteners, cables, electronics and power supply.Assembled microprocessor and Interface Boards.Windows MIRA programming and visualization software & drivers.Teachers can spend their time educating… not developing or sourcing components. Print, assemble and you have yourself a 5 axis robot.http://store.3dprintingsystems.com/stem-education-kits/education%20STEM%203d%20printing%20robotics%20kits
UP BOX Customer Testimonial 3dprintingsystems 2016-05-23 | Angus interviewing George and Alex from Iconic Studio Creations about their experience with the UP BOX 3d printer at NMW 2016.Thanks to Angus from Makersmuse
Could you 3d print a wooden boat prop? 3dprintingsystems 2016-03-01 | In search for original and fun ways to do 'real world tests' of the latest 3d printing materials on offer that can be printed with a desktop 3D Printer, 3D Printing Systems and Clone3D decided to draw on past experience and contacts in the marine industry to perform an unscientific but intriguing look at not only the strength of a printed part but the process in which 3D printed parts are created. The abilities of a modern well designed desktop 3D printer are in a lot of cases lost on newcomers to the technology, the huge array of materials and myths that float around them is definitely a minefield, not to mention the environment some materials require to printed in, heated bed, heated chamber and separate support materials are in some cases a necessity for a successful print. Bruce and Hayden did not want the tests to be carried out on a 100k plus 3D printer but rather a well regarded consumer desktop printer, this did limit the material selection slightly however as you will see great results are achievable. They decided to team up and put together a somewhat educational video (and to see for themselves) what are the potentials and limits of different 3d printing materials. The material selection was ABS, Wood, Polycarbonate and Carbon Fibre. When they first started out in search of good materials for a replaceable boat propeller, wood was never originally going to be included, it was more for a laugh than anything else. Com'on really, a wooden boat propeller! Bruce from 3DPrintingSystems.com 3d scanned an aluminium boat prop from a 15HP Yamaha outboard motor using the EinScan-S, also known as ScanMaster Plus in Australia. The resulting scan was exceptional, in the video you'll see it even captured the serial number etched into the original prop. The scanner was not able to view the internal core/spline of the propeller so Sarah of Idea Beans modelled this in her CAD software, the scan and the core were then merged together to form a solid digital prop ready for 3D printing. Hayden from Clone3D printed the propellers in the various materials with a solid fill at 0.25mm layers using the UP BOX 3D printer. Hayden runs a 3D print service in New Zealand but with 20 years past experience in the marine industry it will come as no surprise that he produces many 3D printed parts for the industry. Bruce and Hayden then did a bunch of bench testing with the different props as you can see in the video with some surprising results. The propellers that made it through testing in one piece were then taken to the ocean, the 15hp motor was bolted to a 12ft inflatable and each propeller/material was given its chance to shine. The video is a worth-while watch, it provides a unique insight into the different materials and the performance of them, it's just that little bit more intelligent than a printed part vs. hammer, and while it is not the first time a wooden boat propeller has been used it is certainly the first time a 3D printed boat propeller has been scanned, printed, tested and proven to work!After a hard day’s work one of the team win a case of beers!
3D Scanning with the Fuel3D Scanify 3dprintingsystems 2016-02-14 | Promo video of the Fuel3D Scanify 3D Scanner with improved 2.1 software.
Installing the Balance Bot STEM Kit 3dprintingsystems 2016-01-29 | The Balance Bot is an open source self balancing 3D Printing STEM kit developed by 3D Printing Systems
Ball valve printed on the UP BOX 3d printer 3dprintingsystems 2015-11-28 | Printed in ABS plastic with a solid infill, weighing over 1.5kgs each. Internally there are two 3d printed rubber seals using the Rubber Like 2 material. Each part was Acetone vapor polished for 15 seconds. The Acetone vapor process seals the part and increases part strength about four times!
BALANCE-BOT | 3D Printing STEM Kits 3dprintingsystems 2015-11-11 | The kit can be purchased from here:http://store.3dprintingsystems.com/stem-education-kits/Balance-BotStudents can modify Balance-Bot here:projectignite.autodesk.com/app/project/316/Balance-Bot-Warrior/overviewBALANCE-BOT is one of the many STEM3dKits. It is a remotely controlled self balancing Arduino robot created with 3D printed parts. With only two wheels, BALANCE-BOT is able to maintain its balance all the time by using his internal sensors and driving the motors. You can control your Robot, making him move or spin, by sending commands via a Smartphone, Tablet or PC while it maintains its balance.
