Uploaded April 2018 | Updated September 2026, 2 weeks ago
Build and assembly of the Tevo Tarantula 3D printer and first prints. Setup of the cheap DIY kit is a straight forward process following the included instructions.
Get the printer here Tevo 3D Printer: bit.ly/2H6Jf19
*Update Consider this printer instead goo.gl/E8uS76
3D Filament goo.gl/KKFfBB
This site contains affiliate links for which I may be compensated
The printer is built completely stock following the instructions. It is best to build it completely stock first, get it printing, and then see what changes or upgrades are needed.
PROS + CONS
-Has a Aluminum frame
-Its cheap
-No filament holder, power supply & screen separate.
-Be prepared to spend time adjusting, building, troubleshooting and setting up
-Safety upgrades - Mosfet (recommended )
-Comes with a Euro power cable - I wired in a spare AU cable
-Care needed wiring the power wires to the powersupply.
-Upgrades available, needs fan mod first.
-Single z axis lead screw
-Good if you like DIY, building and tinkering, if not best to buy a ready built printer.
-Building you will learn and understand how a 3d printer functions.
-Out of the box it needs work
My other 3d Printers
Cocoon youtu.be/Xxr2GkDVfV8
Anet youtu.be/DeeQp-Cc5Yc
Thank you for watching, all questions and feedback are welcome.
Share the video with a friend !
AMSTUDIO channel for other DIY projects.
youtube.com/channel/UCQS1ZB3BVSrBo3tCs7PyfxQ
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Build and assembly of the Tevo Tarantula 3D printer and first prints. Setup of the cheap DIY kit is a straight forward process following the included instructions.
Get the printer here Tevo 3D Printer: bit.ly/2H6Jf19
*Update Consider this printer instead goo.gl/E8uS76
3D Filament goo.gl/KKFfBB
This site contains affiliate links for which I may be compensated
The printer is built completely stock following the instructions. It is best to build it completely stock first, get it printing, and then see what changes or upgrades are needed.
PROS + CONS
-Has a Aluminum frame
-Its cheap
-No filament holder, power supply & screen separate.
-Be prepared to spend time adjusting, building, troubleshooting and setting up
-Safety upgrades - Mosfet (recommended )
-Comes with a Euro power cable - I wired in a spare AU cable
-Care needed wiring the power wires to the powersupply.
-Upgrades available, needs fan mod first.
-Single z axis lead screw
-Good if you like DIY, building and tinkering, if not best to buy a ready built printer.
-Building you will learn and understand how a 3d printer functions.
-Out of the box it needs work
My other 3d Printers
Cocoon youtu.be/Xxr2GkDVfV8
Anet youtu.be/DeeQp-Cc5Yc
Thank you for watching, all questions and feedback are welcome.
Share the video with a friend !
AMSTUDIO channel for other DIY projects.
youtube.com/channel/UCQS1ZB3BVSrBo3tCs7PyfxQ
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
