Uploaded December 2022 | Updated November 2026, 3 hours ago
Played on the Nintendo Switch Arcade Archives version
Haven't played TGM in a long time, but since this is the game that made me get into Tetris more seriously I decided to get the switch version when it released. Good to see that after a few days of derusting I've gotten more consistent.
Also shoutouts to the 6 seconds I lost at the end by locking the T piece one frame to early lmao
#tetris #grandmaster #tgm_series
Played on the Nintendo Switch Arcade Archives version
Haven't played TGM in a long time, but since this is the game that made me get into Tetris more seriously I decided to get the switch version when it released. Good to see that after a few days of derusting I've gotten more consistent.
Also shoutouts to the 6 seconds I lost at the end by locking the T piece one frame to early lmao
#tetris #grandmaster #tgm_series
![[Blockout] X - S P I N ✔ C O N F I R M E D ! ?
just needed one more direction to rotate in [Blockout] X - S P I N ✔ C O N F I R M E D ! ?](https://i.ytimg.com/vi/W5I6fu0j00U/mqdefault.jpg)
![[Tetris Worlds] O - F A L L ⏬ D E C U P L E / D E C T R I S
I mean its not spinning [Tetris Worlds] O - F A L L ⏬ D E C U P L E / D E C T R I S](https://i.ytimg.com/vi/WEfBpnTivZA/mqdefault.jpg)

![[Puyo Puyo Tetris] Z 5 - S P I N 🔀 E L E V A T O R 【PENTOMINO】 (5,000 subscriber special 4/6)
Building part ends at 3:55
Im doing literally all elevators except for the domino (and O and the monomino for obvious reasons) as my late 5,000 special. First is revisiting a couple old ones to add improvements, then its the turn of the pentominoes I havent done yet.
This is a setup for a Z5-Spin Elevator. It elevates the piece by 3 cells per 3 steps and the loop stacks on top of itself without any offset, and is performable in 20G. The piece has to be rotated clockwise before getting into the loop, then the steps are rotate counter-clockwise, rotate clockwise, shift right, and repeat. Holding right and mashing counter-clockwise and clockwise in order also works.
While the optimal elevator would be 6 cells of height per 4 steps, I didnt manage to get it and I dont see it happen due to the rotations of the piece. A 6 height per 5 steps or 5 height per 4 steps loop may be possible though, and is a possible improvement. [Puyo Puyo Tetris] Z 5 - S P I N 🔀 E L E V A T O R 【PENTOMINO】 (5,000 subscriber special 4/6)](https://i.ytimg.com/vi/Wm40uIeccYM/mqdefault.jpg)
![[Puyo Puyo Tetris] J - S P I N ⤴ E L E V A T O R 【Ver.II】
Build done at 2:08
Redid J/L because I wanted an elevator that could be stacked on top of itself forever [Puyo Puyo Tetris] J - S P I N ⤴ E L E V A T O R 【Ver.II】](https://i.ytimg.com/vi/WxNO4Hcjhtg/mqdefault.jpg)
![[Game dev] Continuing the local VS stuff
more stuff [Game dev] Continuing the local VS stuff](https://i.ytimg.com/vi/XAaBwdfL7UU/mqdefault.jpg)
![[Tetris Effect] Mini T-Spin Double All Clear... yeah alright
Mystery is fun
Read below before you ask proper t-spin double all clear next? please
Mini T-Spin Double All Clear is possible because even though the T piece is missing a block, the rotations and the T-Spin check happens as if it was the original piece. I can still shift the piece against the wall though and put the spot where the missing block would be out of the playfield. That way when I softdrop and rotate counterclockwise, the T pieces back corners are outside the playfield, and one of the front corners is inside the stack, resulting in a Mini T-Spin as far as the game is concerned.
A full T-Spin Double is sadly not possible with this I dont think. You would think you can use the other bent trimino you can get out of the T piece, so that when you do the same thing one of the front corners is out of bounds and the other is in the stack, but the problem is that youre going to rotate into a position where the missing block would be out of bounds, and for whatever reason, the collision check on rotation still considers the missing block. So in short, if you were to adapt this to try for a full T-Spin Double All Clear, the piece would kick out of the spot youre trying to put it in.
Timestamps for those of you who wanna skip around:
0:00 - when the run starts
0:39 - when I get the piece
5:09 - when I do the thing you came for
7:20 - when I get another all clear
8:00 - when I get another of the piece
8:58 - when I do another mini T-Spin double to end the run [Tetris Effect] Mini T-Spin Double All Clear... yeah alright](https://i.ytimg.com/vi/XEEcsCkMAYs/mqdefault.jpg)
![[Puyo Puyo Tetris] just a casual game of fusion
So I found out how to do this graphical glitch, and its basically the same as softlocking.
First, you create a limbo block with a well timed spin and clear to lock a piece in a wall (1:43). The overwritten block will stay there when you downstack to it, but will have weird properties:
- Polyominoes will just harddrop through/into it. The limbo block will not be used to clear lines however, so keep track of where it is not to end up with a seemingly full line staying on the screen.
- Dropping a regular pair/set puyos on it will softlock your board (2:33). This is most likely due to the puyos not being able to know where to land, thus staying in mid-air consequently preventing the next piece to spawn. (Although sometimes what happens is it just prevents puyos fron clearing so you can link dozens of them together then squish them with a polyomino to make them pop)
- Dropping a group of puyos from your special Tetromino however will cause this weird graphical glitch (2:20). I assume its because it tries linking the puyo inside the limbo block with something else, so it looks like it stretches to the top left corner of the screen. Also somehow it makes me drop the puyos through the solid block under it so I have no clue whats going on.
tl;dr oh no fusion broke af what a surprise [Puyo Puyo Tetris] just a casual game of fusion](https://i.ytimg.com/vi/XIr6RPIFE0c/mqdefault.jpg)
![[Game dev] Starting to make a little bit of local VS, with a twist
spin to win [Game dev] Starting to make a little bit of local VS, with a twist](https://i.ytimg.com/vi/XP-Xhpi1aEE/mqdefault.jpg)
![[Puyo Puyo Tetris] WHAT COULD ❔ GO WRONG
Shoutouts to SimpleFlips for discovering this: https://www.youtube.com/watch?v=mS8ySzSZLoM
This is due to a frame perfect input on the moment where the piece that made me die spawned. If you time it correctly, its possible to have the piece lock and swap for hold at the same time. This puts a copy in hold despite the piece locking in the field, and spawns your hold piece (which spawns no matter what, I call it the hold glitch and it was knows for a bit, see https://www.youtube.com/watch?v=4YlDQgBY3ow but ignore the mini part), which you can then use. However since the death flag is set from the time your piece instant-locked, this piece placement will not clear anything to save you and you will top out.
Yes I used a autohotkey script to spam hold for me because I didnt want to count on my abilities to time something considering my skill in rhythm games.
haha gotem [Puyo Puyo Tetris] WHAT COULD ❔ GO WRONG](https://i.ytimg.com/vi/XRa56jjG0QE/mqdefault.jpg)
![[Puyo Puyo Tetris] T-Spins are cool and all but have you ever done 50 S-Spin Triples?
This video is a replay of a marathon game played back at 2x speed.
The technique used here is called Infinite S-Spin Triple, or S-Spin Triple stacking. You can read up on this technique here: https://harddrop.com/wiki/ZST/SST_Stacking
Now for some extra details:
To make my life easier, I used some tricks I figured out to make my life easier which (at the time of recording) are not on the page linked above.
First off, when starting to build the stack, I make sure to use two L, two T and two S in the stack. Since, past this point, a 3-line clear occurs whenever I get L, S and T dealt, this makes sure I can use the following L, T and S pieces only to clear triples, and that I wont get two of any of these before getting them all.
(Note that you dont have to use two of L, S and T at the start, any amount works as long as its the same for each piece, but even numbers are preferred to make the next step easier, and using 4 makes the stack uncomfortably high to start.)
Now that the placement for L, S and T is defined (to clear with a S-Spin Triple), the only pieces I have to worry about are I, J, O and Z. First, I try to get in a position where I can place a Z standing up in either side of the remaining 6 columns. This is where I am going to place literally every following Z piece, because this leaves me a 4-column wide area to deal with J and O, which gives me ease and flexibility in my stacking decisions. The I pieces either go on the Z pile or the JO pile, to keep things balanced. I am biased towards putting them in the Z pile when I can though, since its rarely convenient to do so.
And now I am set pretty much forever, except not really. Since I clear 3 lines (30 blocks) every 7 pieces (28 blocks), my stack is drained at a rate of 2 blocks per 7 pieces (because 28 - 30 = -2). This means that my stack will eventually become too low if I do not take some time to make it higher again. This is what Im doing at 1:05. Like at the start, I use two L, two S and two T in my stack, in a way that makes it easy to start the loop again. You probably want to put the T pieces in the Z pile for this, and build 3x4 rectangles with JLS or JLO.
I managed to keep the strategy going until 3:47, where I started panicking and just somewhat winged the last few line clears. Probably because keeping it up for any longer would have had needed another refilling which I didnt feel comfortable doing on level 15 speeds.
If you read the entire description, hats off to you, and feel free to put these extra strategies in the wiki or something, if they havent made it there yet. [Puyo Puyo Tetris] T-Spins are cool and all but have you ever done 50 S-Spin Triples?](https://i.ytimg.com/vi/XXPL7JHzElA/mqdefault.jpg)