Uploaded October 2026 | Updated November 2026, 14 hours ago
We are continuing to prepare the systems for the phased assembly of the NOVA-2 airship, which has a volume of 2000 m³.
Another round of testing of the air-and-gas system (AGS) and its control unit was carried out on a custom-built receiver. This equipment will soon be installed directly on the NOVA-2 envelope.
The objective of the current stage is to verify in advance that the system components and control algorithms work together under controlled conditions before they are integrated into the airship.
During the tests, we checked the operation of the AGS actuators and control unit, ran control commands and observed how the system responded to changes in the set parameters.
This sequence allows the systems to be tested and adjusted separately before they are installed on the vehicle, any necessary changes to be identified on the test bench, and only then the next stage of integration to begin.
To see how the work was carried out, watch the video.
This work is particularly important now: the envelope has been manufactured and its initial tests completed, while preparation of the NOVA-2 structures and onboard systems continues in parallel.
We methodically check every component before proceeding with the phased assembly of the airship. The next step is to transfer the tested and adjusted systems from the test bench to the full-size NOVA-2 envelope.
Learn more about the New Generation Airships project.
*The translation is done with the help of artificial intelligence.
More about our projects:
Duyunov Motors -
https://sg.solar/Ussk
New Generation Airships' -
https://sg.solar/UsAU
SOLARGROUP website -
https://sg.solar/bTTM
#Duyunov #InductionMotors #Motors #DuyunovMotors #technologies #Innovations #equipment
#NewGenerationAirships #AirshipFlight
We are continuing to prepare the systems for the phased assembly of the NOVA-2 airship, which has a volume of 2000 m³.
Another round of testing of the air-and-gas system (AGS) and its control unit was carried out on a custom-built receiver. This equipment will soon be installed directly on the NOVA-2 envelope.
The objective of the current stage is to verify in advance that the system components and control algorithms work together under controlled conditions before they are integrated into the airship.
During the tests, we checked the operation of the AGS actuators and control unit, ran control commands and observed how the system responded to changes in the set parameters.
This sequence allows the systems to be tested and adjusted separately before they are installed on the vehicle, any necessary changes to be identified on the test bench, and only then the next stage of integration to begin.
To see how the work was carried out, watch the video.
This work is particularly important now: the envelope has been manufactured and its initial tests completed, while preparation of the NOVA-2 structures and onboard systems continues in parallel.
We methodically check every component before proceeding with the phased assembly of the airship. The next step is to transfer the tested and adjusted systems from the test bench to the full-size NOVA-2 envelope.
Learn more about the New Generation Airships project.
*The translation is done with the help of artificial intelligence.
More about our projects:
Duyunov Motors -
https://sg.solar/Ussk
New Generation Airships' -
https://sg.solar/UsAU
SOLARGROUP website -
https://sg.solar/bTTM
#Duyunov #InductionMotors #Motors #DuyunovMotors #technologies #Innovations #equipment
#NewGenerationAirships #AirshipFlight










