Test electric welding machine VS water welding machine @ElectricExperimentsRobert33
Test electric welding machine VS water welding machine  @ElectricExperimentsRobert33
Uploaded December 2017 | Updated November 2026, 3 hours ago
WARNING: very dangerous experiment, replicated only by people with electrical experience.
In this experiment a normal electric welding machine and an imitation of salt water electric welding machine are compared. The purpose is to show how the salt water system exploits the electrical conductivity to weld. Material: Insulating rubber gloves. Tap water. Cooking salt. 2 copper sheets for electrical contacts. Electrodes 1.5 mm maximum. This welding system does not replace a real electric welding machine, but is an alternative to emergency welding in case of need. The working voltage for welding is between 38 and 42 volts. Keep in mind that the system is not a current transformer, 230V is always present in the cables.The power for deep welding is based on adding more salt in water. The current to carry out this welding must not be less than 3KW with 220-230V. Electrodes 1.5 - 2 mm maximum. ***Fundamental, to be successful with this type of welding you have to connect directly from the counter, not from the safety switch.
Test electric welding machine VS water welding machineTwo dynamo electric motors connected via the axesAC versus DC load breaking comparison with a knife switchCapacitor and superCapacitor DCAlternator & Motor GeneratorInedit magnet motor homopolarRotation Liquid Mercury generated by a magnetic fieldElectricity with transmission magnetsLiquid Mercury vortex in a magnetic fieldHomemade replication batteryElectricity from the seaFree Energy Motor, TRICK
Experiments Robert33 |

Test electric welding machine VS water welding machine

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER