Uploaded August 2023 | Updated November 2026, 6 hours ago
First techno jam with the push 3 standalone, the idea was to explore the different input and output of the Push 3 and see how everything goes together, the sync, the latency, workflow etc....
Also trying to figure it out MPE, and how i can use it in the best way into my workflow.
Note that Push3 is in Standalone Mode and therefore not connected to Ableton on my computer or controlling Ableton.
All the sequencing, syncing, routing, recording, processing was done within the Push 3. (as proof you can see that no usb c cable is connected to the push 3).
Then the Audio Output of the push 3 is feed into my soundcard and the jam is recorded in Ableton live (on my computer).
The jam was also slightly ''homemade'' mastered afterward.
Everything what i do is explain in the video. The gear used is :
Ableton push 3 Standalone
Faderfox UC4
Arturia Microfreak
Moog DFAM
Microfreak preset breakdown video : youtu.be/SQvmeKWv0gE
๐ชSUPPORT ME
๐งช Patreon : patreon.com/AudioreaktLab
๐ฅ Samples, Presets & Templates | audioreakt.com
๐ผMy Music | https://linktr.ee/eternalchase
๐ TOP 5 ABLETON LIVE 11 RACK
๐Techno Rumble Kick : youtube.com/watch?v=9y3szLs04RA
๐Acid Techno Rack : youtube.com/watch?v=iko9-z1R1Sc
๐ Industrial Techno Kick : youtube.com/watch?v=k3M1ho1OhDM
๐ Techno Sequencer : youtube.com/watch?v=s2drgThbQgY&t=544s
๐ Techno Rolling Bassline : youtube.com/watch?v=sz3H42wHh-w&t=87s
๐ VIDEO EVERY SUNDAY AND WEDNESDAY AT 5PM UK TIME
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
#TechnoTips#AbletonTutorial#TechnoTutorial
First techno jam with the push 3 standalone, the idea was to explore the different input and output of the Push 3 and see how everything goes together, the sync, the latency, workflow etc....
Also trying to figure it out MPE, and how i can use it in the best way into my workflow.
Note that Push3 is in Standalone Mode and therefore not connected to Ableton on my computer or controlling Ableton.
All the sequencing, syncing, routing, recording, processing was done within the Push 3. (as proof you can see that no usb c cable is connected to the push 3).
Then the Audio Output of the push 3 is feed into my soundcard and the jam is recorded in Ableton live (on my computer).
The jam was also slightly ''homemade'' mastered afterward.
Everything what i do is explain in the video. The gear used is :
Ableton push 3 Standalone
Faderfox UC4
Arturia Microfreak
Moog DFAM
Microfreak preset breakdown video : youtu.be/SQvmeKWv0gE
๐ชSUPPORT ME
๐งช Patreon : patreon.com/AudioreaktLab
๐ฅ Samples, Presets & Templates | audioreakt.com
๐ผMy Music | https://linktr.ee/eternalchase
๐ TOP 5 ABLETON LIVE 11 RACK
๐Techno Rumble Kick : youtube.com/watch?v=9y3szLs04RA
๐Acid Techno Rack : youtube.com/watch?v=iko9-z1R1Sc
๐ Industrial Techno Kick : youtube.com/watch?v=k3M1ho1OhDM
๐ Techno Sequencer : youtube.com/watch?v=s2drgThbQgY&t=544s
๐ Techno Rolling Bassline : youtube.com/watch?v=sz3H42wHh-w&t=87s
๐ VIDEO EVERY SUNDAY AND WEDNESDAY AT 5PM UK TIME
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
#TechnoTips#AbletonTutorial#TechnoTutorial




![How to Make industrial Techno Part 1 (Sound Design & Composition) [Ableton Techno Tutorial]
Learn the rope of how to create a track in the Industrial Techno style! Discover or re-discover how powerful the Ableton stock plugin are! In this video we only have used Ableton Live Stock Plugins, from the creation of the song, to the mixing stage, and finally the mastering!
This week we will focus on the Sound Design & Composition part, and next week on the arrangement, mixing and mastering.
โก Grab the template here : https://audioreakt.com/collections/templates/products/industrial-techno-5-ableton-template-live11
๐ชSUPPORT ME
๐งช Patreon : https://www.patreon.com/AudioreaktLab
๐ฅ Samples, Presets & Templates | https://audioreakt.com/
๐ผMy Music | https://linktr.ee/eternalchase
โ Timeline:
00:00 intro
00:21 Track Playback
01:02 Kick
04:30 Kick perc
05:08 Hats
07:50 Rides
09:36 Perc
11:36 Perc 2
13:24 Perc 3
15:21 Perc 4
16:45 Lead
23:28 Pad
๐๏ธ Rack used in the video:
๐ Kickpunch : https://www.youtube.com/watch?v=guzmn4nhfg8
๐ Beatrepeat Rack : https://youtu.be/4h_z2mNAvD0?si=RFMS68kzG39U60uA
๐ Sidechain Rack : https://youtu.be/coKuqMFciVg?si=USGEcUuyoDplJDyi
๐ Modernizer : https://youtu.be/coKuqMFciVg?si=USGEcUuyoDplJDyi
๐ TOP 5 ABLETON LIVE 11 RACK
๐Techno Rumble Kick : https://www.youtube.com/watch?v=9y3szLs04RA
๐Acid Techno Rack : https://www.youtube.com/watch?v=iko9-z1R1Sc
๐ Industrial Techno Kick : https://www.youtube.com/watch?v=k3M1ho1OhDM
๐ Techno Sequencer : https://www.youtube.com/watch?v=s2drgThbQgY&t=544s
๐ Techno Rolling Bassline : https://www.youtube.com/watch?v=sz3H42wHh-w&t=87s
๐ VIDEO EVERY SUNDAY AND WEDNESDAY AT 5PM UK TIME
#TechnoTips#AbletonTutorial#TechnoTutorial How to Make industrial Techno Part 1 (Sound Design & Composition) [Ableton Techno Tutorial]](https://i.ytimg.com/vi/t4lW3nF73yQ/mqdefault.jpg)

![Techno Jam with DFAM, Push 2, Enner ,UC4 & Ableton
Initially I was just experimenting with the DFAM, but things happen really quickโฆAdd a rumble, couple of drums, a percussive synth that answer the DFAM and finally experimenting with Enenr on top.
The set up is explained in the video, but here are the main things :
Ableton is the Main Sequencer/Clock
I got 8 track in Ableton :
1- Kick/Rumble (Audio Loop)
2- Hats Drum Rack (Chh, Ohh & Ride Samples)
3- Clap (samples)
4- Perc (AYNIL_Rawsynth Rack)
5- DFAM (Hard sync Off) Mid Hook [Rec]
6- DFAM (Hard Sync On) Hi Hook (Live)
7- ENNER (Ambience Rec)
8- ENNER (Live impro)
Push 2 is use mainly to sequence Hats Clap and Perc, record live the DFAM & ENNER, and few other things here and there (Mix, Repeats, Launch etcโฆ)โฆ
DFAM is the main melody/hook. I first record on track 5 the sequence with Hard Sync Off, the sound is like bassy/mid sound. Then I play with it again live on Track 6 with Hard Sync On this time, same hook but more in the hi frequencies.
ENNER is used to create the dark ambience at the beginning (Track 7). Then I used it live for impro on Track 8 later on.
UC4 is another midi controller for Ableton, I use it for low cut on master (Button 1 = Togglle ON/OFF EQ8 on master), other Buttons are mute for each track (Buttons 2 = Hats Mute, Button 3 = Clap Mute etcโฆ) Fader 1 send the whole mix to a return effect with a wash out reverb effect. Fader 2,3,4 respectively control the volume of the CHH, OHH and Ride from the Hats Drum rack. Encoder 1 Press toggle on/off radio style effect EQ on the master
๐ชSUPPORT ME
๐งช Patreon : https://www.patreon.com/AudioreaktLab
๐ฅ Samples, Presets & Templates | https://audioreakt.com/
๐ผMy Music | https://linktr.ee/eternalchase
๐ TOP 5 ABLETON LIVE 11 RACK
๐Techno Rumble Kick : https://www.youtube.com/watch?v=9y3szLs04RA
๐Acid Techno Rack : https://www.youtube.com/watch?v=iko9-z1R1Sc
๐ Industrial Techno Kick : https://www.youtube.com/watch?v=k3M1ho1OhDM
๐ Techno Sequencer : https://www.youtube.com/watch?v=s2drgThbQgY&t=544s
๐ Techno Rolling Bassline : https://www.youtube.com/watch?v=sz3H42wHh-w&t=87s
๐ VIDEO EVERY WEDNESDAY AT 5PM UK TIME
#TechnoTips#AbletonTutorial#TechnoTutorial Techno Jam with DFAM, Push 2, Enner ,UC4 & Ableton](https://i.ytimg.com/vi/u4FT7FKMprY/mqdefault.jpg)

![How to Make Peak Time Techno Part 1 (Sound Design & Composition) [Ableton Techno Tutorial]
Learn the rope of how to create a Peak Time Techno track! Discover or re-discover how powerful the Ableton stock plugin are! In this template we only have used Ableton Live Stock Plugins, from the creation of the song, to the mixing stage, and finally the mastering!
Grab the template here : https://audioreakt.com/collections/templates/products/peak-time-techno-5-ableton-template-live11
๐ชSUPPORT ME
๐งช Patreon : https://www.patreon.com/AudioreaktLab
๐ฅ Samples, Presets & Templates | https://audioreakt.com/
๐ผMy Music | https://linktr.ee/eternalchase
โ Timeline:
00:00 Intro
00:21 Track Playback
01:07 Kickdrum
02:30 Bass
04:17 Bass Hi
07:20 Hats
09:47 Perc / Clap
12:09 Lead 1
16:02 Stab 1
20:27 Stab 2
21:39 Stab 3
22:57 Stab 4
24:46 Stab 5
26:07 Synth 1
27:26 Synth 2
28:49 Horn 1
30:54 horn 2
32:57 Drone
33:41 Voice
34:22 Acid
35:43 Pad
38:09 Sfx
40:01 Mixdown
๐๏ธ Rack used in the video:
๐ Sidechain Rack : https://audioreakt.com/collections/templates/products/peak-time-techno-5-ableton-template-live11
๐ Acidbox : https://www.youtube.com/watch?v=AXbbOQQtP3g&t=82s
๐ Rizer Rack : https://www.youtube.com/watch?v=NanavEul_eM
๐ TOP 5 ABLETON LIVE 11 RACK
๐Techno Rumble Kick : https://www.youtube.com/watch?v=9y3szLs04RA
๐Acid Techno Rack : https://www.youtube.com/watch?v=iko9-z1R1Sc
๐ Industrial Techno Kick : https://www.youtube.com/watch?v=k3M1ho1OhDM
๐ Techno Sequencer : https://www.youtube.com/watch?v=s2drgThbQgY&t=544s
๐ Techno Rolling Bassline : https://www.youtube.com/watch?v=sz3H42wHh-w&t=87s
๐ VIDEO EVERY WEDNESDAY AT 5PM UK TIME
#TechnoTips#AbletonTutorial#TechnoTutorial How to Make Peak Time Techno Part 1 (Sound Design & Composition) [Ableton Techno Tutorial]](https://i.ytimg.com/vi/viSnPF2jtYc/mqdefault.jpg)

