Uploaded October 2026 | Updated November 2026, 2 days ago
Join me for a deep dive into the design of an open source, high-performance realtime data acquisition and control system.
In addition to describing the specifics of the Deimos system, this talk will provide a guide to reusable patterns for building reliable, performant, extensible, and user-friendly realtime machinery.
Topics will include:
Hardware & firmware design
* Modularity & cost-performance-reusability tradeoffs
* Escaping FPGAs, RTOS, and async tasks - a Rust firmware success story
Analog frontends
* Uncertainty analysis, calibration, and testing
* Sensor blocks - thermocouple, resistance, 4-20 mA
* Analog filtering - active, passive, combined, keeping the ADC happy
* Over-voltage protection in precision systems - a modern (ab)use of JFETs & an adventure with leakage current
Digital filtering
* IIR vs. FIR for software-defined low-pass filters
* Live construction, initialization, and error-correction w/ 32-bit floats
* Sample sync via Lagrange polynomial fractional delay filter
System design & application software
* UDP vs. TCP vs. USB vs. UART-to-USB, pub-sub vs. unicast
* Actively controlled multi-module time sync without admin access, clock wires, or platform-specific implementation
* Inversion of control to mitigate time-of-arrival uncertainty & maintain hard-realtime timing without low-level network access
* Non-dimensionalized controller
* Soft-realtime application timing, CPU usage tradeoff, and performant (busy/waiting) vs. efficient (OS-polled) operating modes
* Monotonics vs. "realtime" clocks, VDSO, and NTP adjustments
* Packet interchange format
* Realtime expression engine & ultra-low-latency calculations
* Cross-platform control software - a Rust software success story
Supply chain, price cuts, and tariff times
Prototyping cost-reduction tricks
*About the Speaker*
James Logan spent five years at SpaceX in propulsion development engineering for the M1D and Raptor engines before moving to Commonwealth Fusion Systems in 2021, where he is now a principal engineer in the scientific software group.
*About Teardown*
Teardown is a yearly event hosted by Crowd Supply that draws hackers, makers, and engineers from across the US (and the world) to meet together in Portland, Oregon. Teardown is about the practice of hardware: prototyping, manufacturing, testing, disassembling, and circumventing, all while having fun. Teardown attendees can expect lively talks, demos, art installations, hands-on workshops, fiendish puzzles, and lots of good food. Check it out! crowdsupply.com/teardown
*About Crowd Supply*
Crowd Supply is the crowdfunding platform of choice for engineers, hackers, designers, and idealists. We help them with the funding and support they need to deliver respectful, thoughtfully crafted, open source hardware to their delighted backers. Come see what our creators are making: https://www.crowdsupply.com!
*Follow Us!*
YouTube: youtube.com/@crowd_supply
Instagram: instagram.com/crowdsupply
Discord: discord.com/invite/7p5huQ
LinkedIn: linkedin.com/company/crowdsupply
Mastodon: hachyderm.io/@crowdsupply
Bluesky: https://bsky.app/profile/crowdsupply.bsky.social
#opensourcehardware #hardwarehacking #opensource #hardware #teardown #maker #hacker #electronics #crowdsupply #crowdfunding #manufacturing #dataacquisition
Join me for a deep dive into the design of an open source, high-performance realtime data acquisition and control system.
In addition to describing the specifics of the Deimos system, this talk will provide a guide to reusable patterns for building reliable, performant, extensible, and user-friendly realtime machinery.
Topics will include:
Hardware & firmware design
* Modularity & cost-performance-reusability tradeoffs
* Escaping FPGAs, RTOS, and async tasks - a Rust firmware success story
Analog frontends
* Uncertainty analysis, calibration, and testing
* Sensor blocks - thermocouple, resistance, 4-20 mA
* Analog filtering - active, passive, combined, keeping the ADC happy
* Over-voltage protection in precision systems - a modern (ab)use of JFETs & an adventure with leakage current
Digital filtering
* IIR vs. FIR for software-defined low-pass filters
* Live construction, initialization, and error-correction w/ 32-bit floats
* Sample sync via Lagrange polynomial fractional delay filter
System design & application software
* UDP vs. TCP vs. USB vs. UART-to-USB, pub-sub vs. unicast
* Actively controlled multi-module time sync without admin access, clock wires, or platform-specific implementation
* Inversion of control to mitigate time-of-arrival uncertainty & maintain hard-realtime timing without low-level network access
* Non-dimensionalized controller
* Soft-realtime application timing, CPU usage tradeoff, and performant (busy/waiting) vs. efficient (OS-polled) operating modes
* Monotonics vs. "realtime" clocks, VDSO, and NTP adjustments
* Packet interchange format
* Realtime expression engine & ultra-low-latency calculations
* Cross-platform control software - a Rust software success story
Supply chain, price cuts, and tariff times
Prototyping cost-reduction tricks
*About the Speaker*
James Logan spent five years at SpaceX in propulsion development engineering for the M1D and Raptor engines before moving to Commonwealth Fusion Systems in 2021, where he is now a principal engineer in the scientific software group.
*About Teardown*
Teardown is a yearly event hosted by Crowd Supply that draws hackers, makers, and engineers from across the US (and the world) to meet together in Portland, Oregon. Teardown is about the practice of hardware: prototyping, manufacturing, testing, disassembling, and circumventing, all while having fun. Teardown attendees can expect lively talks, demos, art installations, hands-on workshops, fiendish puzzles, and lots of good food. Check it out! crowdsupply.com/teardown
*About Crowd Supply*
Crowd Supply is the crowdfunding platform of choice for engineers, hackers, designers, and idealists. We help them with the funding and support they need to deliver respectful, thoughtfully crafted, open source hardware to their delighted backers. Come see what our creators are making: https://www.crowdsupply.com!
*Follow Us!*
YouTube: youtube.com/@crowd_supply
Instagram: instagram.com/crowdsupply
Discord: discord.com/invite/7p5huQ
LinkedIn: linkedin.com/company/crowdsupply
Mastodon: hachyderm.io/@crowdsupply
Bluesky: https://bsky.app/profile/crowdsupply.bsky.social
#opensourcehardware #hardwarehacking #opensource #hardware #teardown #maker #hacker #electronics #crowdsupply #crowdfunding #manufacturing #dataacquisition










