Uploaded April 2022 | Updated November 2026, 1 day ago
Here is the Switchblade Flying Sports Car taxiing off the runway after reaching take-off speed on an acceleration run! Our second day of high speed taxi testing was just as exciting as the first. We validated aileron effectiveness (banks aircraft left or right) at take-off speeds, which were two very important milestones! We also validated excellent braking efficiency at high speeds, as well as slalom testing to check out how the vehicle would handle if an urgent correction after touchdown was needed.
All was as expected, so we are going to make a few adjustments to the vehicle and see if we can improve our results, then move on to further taxi testing. We are using prop power only for these tests.
You can find out more, or reserve your own Samson Sky Switchblade at: samsonsky.com/reserve
* Resources *
Phone: (855) 7-SAMSON
Website: samsonsky.com
Facebook: facebook.com/SamsonMotorsSwitchblade
Instagram: instagram.com/samsonswitchblade/?hl=en
Twitter: twitter.com/FlyingSportsCar
#switchbladeupdates #flyingcar #amazingvehicles
Here is the Switchblade Flying Sports Car taxiing off the runway after reaching take-off speed on an acceleration run! Our second day of high speed taxi testing was just as exciting as the first. We validated aileron effectiveness (banks aircraft left or right) at take-off speeds, which were two very important milestones! We also validated excellent braking efficiency at high speeds, as well as slalom testing to check out how the vehicle would handle if an urgent correction after touchdown was needed.
All was as expected, so we are going to make a few adjustments to the vehicle and see if we can improve our results, then move on to further taxi testing. We are using prop power only for these tests.
You can find out more, or reserve your own Samson Sky Switchblade at: samsonsky.com/reserve
* Resources *
Phone: (855) 7-SAMSON
Website: samsonsky.com
Facebook: facebook.com/SamsonMotorsSwitchblade
Instagram: instagram.com/samsonswitchblade/?hl=en
Twitter: twitter.com/FlyingSportsCar
#switchbladeupdates #flyingcar #amazingvehicles

![New Engine Studs Working Like Magic [Switchblade Flying Car 2020]
We had been waiting for engine studs to arrive to replace the head bolts for the turbo-charged Samson V4 engine. With the new studs installed, the engine, powering the prop, was run up to 15 psi of boost, which is higher than the 13 pounds we would be using in flight testing. No problems appeared. Yay!!!
The crew was fairly intent, as you can see in the video, with Sean Bliss at the controls running the engine to maximum power, Sam Bousfield looking on to monitor the temperature and boost, and Dana Beebe operating the infrared temperature gun.
* Resources *
Phone: (855) 7-SAMSON
Website: https://www.samsonsky.com/
Facebook: https://www.facebook.com/SamsonMotorsSwitchblade/
Instagram: https://www.instagram.com/samsonswitchblade/?hl=en
Twitter: https://twitter.com/FlyingSportsCar New Engine Studs Working Like Magic [Switchblade Flying Car 2020]](https://i.ytimg.com/vi/RzGZAx_5crg/mqdefault.jpg)








