[TAS] Super Mario 64 - Go to PUs for Red Coins (+100 coins) 11140 @4232Nis
[TAS] Super Mario 64 - Go to PUs for Red Coins (+100 coins) 11140  @4232Nis
Uploaded May 2017 | Updated November 2026, 2 days ago
EDIT: this video has been improved by almost 5 seconds, see it here: youtube.com/watch?v=7krVlpE8t7g&feature=youtu.be

-179f from my last video (5 seconds), -10 seconds from 120 star

100c is 1'06"50

.m64+.st: dropbox.com/s/d5kk7zp2mxcsuaj/wdw%20100c%201%2711%2740%20by%20Nis.zip?dl=0

Tyler Kehne suggested i try to hit the crystal tap from out of my PU movement, which would be ideal since it would snap me up to the top of the water. This is a difficult task since it requires 2 OJs while in PUs, something that doesn't normally happen. The first OJ snaps mario to the loading zone, since we need to load the town first, the second OJ snaps mario to the height of the crystal tap. After i'm at the proper height, i adjust what speed i have left to QPU speed and perform a couple zigzags of movement to position myself at the topleft corner of the map (this is good since i don't need to be as precise since there are OOB barriers surrounding my destination). When i do PU movement to the main map, I appear at the crystal tap at the bottom of the town for 1f and activate it. After that, sm64's water properties detect i'm underneath water so it snaps me to the water's surface. This method both activates the tap faster than my last one as well as lets me get to the first red coin faster, since i don't have to swim towards nor away from the tap for activation.

Possible big improvements:
-i had a BLJ route where i blj between the ceiling and the gate that i appear at after activating the tap. Unforunately, the skeeter needs to be loaded quickly, and the gate area is too far, so the blj setup needs to be about 15f faster or else he won't get stuck in the spot required to do the star animation cancel. BLJing towards the 6th red coin works, but i was not able to create a faster route going in this direction
-the PU movement is a bit clunky. i actually move further from my destination first before moving towards it to set up my spacing. with a speed of +-1000 of my current speed, this may be able to be omitted and save about 30f
-it may be possible to do PU movement into the town, activate the tap, and then escape into a PU afterwards. This would enable us to do PU movement to (any) the first red coin. We don't need to OJ here because the water will snap us to the height of the coin no matter where we show up, so all we need is positioning. I achieved this scenario many times, but for the 1f we snap into the town to activate the tap, the game tries to put us in water and we lose 75% of our speed. This would mean all the OJs need recalculating so that we still have QPU speed after the fact, which could be slower depending how just how much more speed we need to perform the precise OJs again.

Thanks again to Timestoppa for further teaching me about regular PU movement

Player: 4232nis
Rerecords: 19259+
Course 11: Wet-dry World wdw, Go to Town for Red Coins
Super Mario 64 sm64
Tool-Assisted
[TAS] Super Mario 64 - Go to PUs for Red Coins (+100 coins) 11140[TAS] Super Mario the Green Stars - Blazing Thwomp Tower Clear130 STARS PROMO[TAS] Super Mario The Green Stars - Fiery Factory[TAS] Super Mario the Green Stars - Fiery Factory (optimized)[TAS] SMSR - Moving Target 1290[TAS] Super Mario The Green Stars - At the Top of the Cave 837[TAS] Whomp Meta 2018 (10f)[TAS] Captain Toad 64 in 4120Why is this level so fun[TAS] SMNS - To The Great Wall 2890[TAS] SM64: Last Impact - Wildlife Valley
Nis |

[TAS] Super Mario 64 - Go to PUs for Red Coins (+100 coins) 1'11"40

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER