Uploaded August 2026 | Updated September 2026, 2 weeks ago
In this video I guide you through steps 25 to 40 of the brand new Tamiya Lunchbox EVO Monster Truck RC kit build manual. Steps 25 to 40 covers installing all parts in Parts Bag C. This includes making up the 4 CVA shock absorbers and attaching them to the chassis, fitting the front bumper, fitting the tyres to the wheels and the wheels to the chassis.
#rccar #tamiya #rcmonstertruck
About the Lunchbox EVO
- This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 295mm, height: 220mm. Wheelbase: 217mm. Tread: 228mm
- The body is the same as the one used in Item 58347
- Tread and wheelbase are 10mm longer respectively compared to those of Item 58347 to improve traction and controllability
- Updated suspension features front double wishbones and a rear 3-link setup with rigid axles for stable performance
- The steering arm is added at front and stabilizer is at rear, and steering tie-rods are identical length
- Strut bar is added at front to enhance chassis rigidity and to give the model a customized image
- This strut bar works as a transponder mount
- 7mm lower body mount gives a lower centre of gravity, which helps stable control.
- Body is securely mounted by eight screws
- Features full ball bearings for all parts needed to assemble the models as standard
- Hex wheel hubs are included for wheel upgrades. Use with 950 ball bearings (sold separately) and modify wheel attachment hole sizes to allow attachment of wheels with hex hubs at front and rear. Not required for standard operation.
- While the basic design of the Lunch Box is carried over, this kit features an updated sticker design
In this video I guide you through steps 25 to 40 of the brand new Tamiya Lunchbox EVO Monster Truck RC kit build manual. Steps 25 to 40 covers installing all parts in Parts Bag C. This includes making up the 4 CVA shock absorbers and attaching them to the chassis, fitting the front bumper, fitting the tyres to the wheels and the wheels to the chassis.
#rccar #tamiya #rcmonstertruck
About the Lunchbox EVO
- This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 295mm, height: 220mm. Wheelbase: 217mm. Tread: 228mm
- The body is the same as the one used in Item 58347
- Tread and wheelbase are 10mm longer respectively compared to those of Item 58347 to improve traction and controllability
- Updated suspension features front double wishbones and a rear 3-link setup with rigid axles for stable performance
- The steering arm is added at front and stabilizer is at rear, and steering tie-rods are identical length
- Strut bar is added at front to enhance chassis rigidity and to give the model a customized image
- This strut bar works as a transponder mount
- 7mm lower body mount gives a lower centre of gravity, which helps stable control.
- Body is securely mounted by eight screws
- Features full ball bearings for all parts needed to assemble the models as standard
- Hex wheel hubs are included for wheel upgrades. Use with 950 ball bearings (sold separately) and modify wheel attachment hole sizes to allow attachment of wheels with hex hubs at front and rear. Not required for standard operation.
- While the basic design of the Lunch Box is carried over, this kit features an updated sticker design
