Uploaded August 2025 | Updated November 2026, 14 hours ago
Three V-speeds related to takeoff: V1, Vr, and V2. Pilots in training are familiar with rotation speed, or Vr, which is the speed at which the rotation of the airplane is initiated to takeoff attitude. The other two V-speeds, V1 and V2, are typically used for heavier, faster, multi-engine airplanes.
V1 is the takeoff decision speed. It's the speed at which the pilot is to continue the takeoff, even in the event of an engine failure or other serious emergency. At speeds less than V1, it is considered safer to stop the aircraft within the accelerate-stop distance.
Vr cannot be less than V1 or less than 1.05 × Vmca (minimum control speed in the air). On a single-engine takeoff, it also allows for the acceleration to V2 at the 35-foot height at the end of the runway.
V2 is the takeoff safety speed, or a referenced airspeed obtained after lift-off at which the required one-engine-inoperative climb performance can be achieved. Just like it sounds, this speed mainly pertains to multi-engine aircraft. For further study, visit the Airplane Flying Handbook ch.16. 🛫
#flygoldseal #studentpilot #flighttraining #privatepilot #learntofly #pilottraining #flightschool #generalaviation #cfi #takeoff
Three V-speeds related to takeoff: V1, Vr, and V2. Pilots in training are familiar with rotation speed, or Vr, which is the speed at which the rotation of the airplane is initiated to takeoff attitude. The other two V-speeds, V1 and V2, are typically used for heavier, faster, multi-engine airplanes.
V1 is the takeoff decision speed. It's the speed at which the pilot is to continue the takeoff, even in the event of an engine failure or other serious emergency. At speeds less than V1, it is considered safer to stop the aircraft within the accelerate-stop distance.
Vr cannot be less than V1 or less than 1.05 × Vmca (minimum control speed in the air). On a single-engine takeoff, it also allows for the acceleration to V2 at the 35-foot height at the end of the runway.
V2 is the takeoff safety speed, or a referenced airspeed obtained after lift-off at which the required one-engine-inoperative climb performance can be achieved. Just like it sounds, this speed mainly pertains to multi-engine aircraft. For further study, visit the Airplane Flying Handbook ch.16. 🛫
#flygoldseal #studentpilot #flighttraining #privatepilot #learntofly #pilottraining #flightschool #generalaviation #cfi #takeoff










