Uploaded May 2020 | Updated September 2026, 3 weeks ago
Hi All,
Fresh from the “drawing board”, here is the concept of our future spring bolt action rifle platform, the TAC 41.
The initial idea is very simple: transpose the mechanism of our SRS replica into a non-bullpup rifle. The cylinder bore and piston stroke are the same as the SRS, with 41cc air volume, hence the name of the project.
Some specs:
- SRS piston fitted with a specific piston end.
- Stainless steel cylinder.
- Stainless steel spring guide with thrust bearing.
- Carbon steel bolt handle with ergonomic bolt knob (M8x1.25 threaded bolt handle, compatible with our full range of bolt knobs).
- APS 13 mm springs. It is possible to change the spring using only the tools included in the stock. To ensure a smooth cocking movement, the bolt is guided in the receiver by POM rings.
- Rigid receiver/outer barrel assembly, using a clamping system similar to the SRS, allowing quick barrel change preserving hop up setting.
- Inner barrel, 510 mm long, 6.05 mm bore, brass material, AEG type, 3 barrel spacers for stability. Outer barrel thread is M24x1 (direct compatibility with DTSS silencers replicas).
- CNC TDC hop-up unit, 50 position, secured by a ball-plunger. It is adjustable while having the target in the scope and the finger on the trigger.
- Trigger box in stamped stainless steel, CNC stainless steel piston sear, mounted on ball bearings to limit trigger pull weight, adjustable trigger pre-load and dual-stage course.
- Carbon steel safety.
- Fully ambidextrous design, conversion can be done within minutes without any optional parts.
- CNC aeronautical grade receiver and outer barrel.
- Nylon stock, fiberglass reinforced, 5 MLOK slots on each side, 2 MLOK slots under, 4 QD attachment points, tripod mount, adjustable cheek rest height, adjustable length with 10mm extensions (3 pieces will be included with the rifle).
- 48 rounds polymer magazine.
- Estimated mass: 2.65 Kg (with magazine and 3 stock extensions), length: 110 cm.
- Release date and price range to be confirmed.
TAC-41 is now in prototyping stage, actual shooting video will come as soon as possible.
Music: Dub Zap - Jingle Punks
Hi All,
Fresh from the “drawing board”, here is the concept of our future spring bolt action rifle platform, the TAC 41.
The initial idea is very simple: transpose the mechanism of our SRS replica into a non-bullpup rifle. The cylinder bore and piston stroke are the same as the SRS, with 41cc air volume, hence the name of the project.
Some specs:
- SRS piston fitted with a specific piston end.
- Stainless steel cylinder.
- Stainless steel spring guide with thrust bearing.
- Carbon steel bolt handle with ergonomic bolt knob (M8x1.25 threaded bolt handle, compatible with our full range of bolt knobs).
- APS 13 mm springs. It is possible to change the spring using only the tools included in the stock. To ensure a smooth cocking movement, the bolt is guided in the receiver by POM rings.
- Rigid receiver/outer barrel assembly, using a clamping system similar to the SRS, allowing quick barrel change preserving hop up setting.
- Inner barrel, 510 mm long, 6.05 mm bore, brass material, AEG type, 3 barrel spacers for stability. Outer barrel thread is M24x1 (direct compatibility with DTSS silencers replicas).
- CNC TDC hop-up unit, 50 position, secured by a ball-plunger. It is adjustable while having the target in the scope and the finger on the trigger.
- Trigger box in stamped stainless steel, CNC stainless steel piston sear, mounted on ball bearings to limit trigger pull weight, adjustable trigger pre-load and dual-stage course.
- Carbon steel safety.
- Fully ambidextrous design, conversion can be done within minutes without any optional parts.
- CNC aeronautical grade receiver and outer barrel.
- Nylon stock, fiberglass reinforced, 5 MLOK slots on each side, 2 MLOK slots under, 4 QD attachment points, tripod mount, adjustable cheek rest height, adjustable length with 10mm extensions (3 pieces will be included with the rifle).
- 48 rounds polymer magazine.
- Estimated mass: 2.65 Kg (with magazine and 3 stock extensions), length: 110 cm.
- Release date and price range to be confirmed.
TAC-41 is now in prototyping stage, actual shooting video will come as soon as possible.
Music: Dub Zap - Jingle Punks
