Uploaded July 2022 | Updated September 2026, 2 weeks ago
The TAC-41 A (Aluminium) is the new iteration of the TAC-41 platform.
- Folded length: 68 cm
- Unfolded length: 92 cm (minimum)
- 2.8 Kg, magazine engaged
It features a full metal chassis (6000 series aluminium stock & chassis, steel hinges) covered with fiberglass reinforced polymer components.
This chassis is compatible with TAC-41 P airsoft guns.
This chassis offers plenty of mounting options:
- 4 MLOK slots on each side
- 3 MLOK slots under
- 2 MLOK slots under the folding stock
- 6 QD points
- ARCA rail under the chassis
The grip is AR15/GBBr compatible, and the safety can be activated by the trigger finger (right or left).
Tool-less ergonomic adjustments: cheekpad (horizontal & vertical), buttplate (length & height).
The new magazine accepts 110 bbs (reverse-compatibility with short magazines).
The barrel is 330 mm 6.05 brass AEG type. M24x1 outer barrel thread.
Bolt, trigger group, receiver & feeding system are the same & compatible with TAC 41 P.
4 colors are available : Black, Flat Dark Earth, Olive Drab & Wolf Grey.
Available in September 2022.
TAC-41 A: silverback-airsoft.com/blt-31https://www.silverback-airsoft.com/blt-31
Aluminium chassis alone: silverback-airsoft.com/stk-35
Long magazine: silverback-airsoft.com/mag-31
Music: Funk Rock Instrumental - Mironov Sound (soundcloud.com/mironovsound/funk-rock-instrumental)
The TAC-41 A (Aluminium) is the new iteration of the TAC-41 platform.
- Folded length: 68 cm
- Unfolded length: 92 cm (minimum)
- 2.8 Kg, magazine engaged
It features a full metal chassis (6000 series aluminium stock & chassis, steel hinges) covered with fiberglass reinforced polymer components.
This chassis is compatible with TAC-41 P airsoft guns.
This chassis offers plenty of mounting options:
- 4 MLOK slots on each side
- 3 MLOK slots under
- 2 MLOK slots under the folding stock
- 6 QD points
- ARCA rail under the chassis
The grip is AR15/GBBr compatible, and the safety can be activated by the trigger finger (right or left).
Tool-less ergonomic adjustments: cheekpad (horizontal & vertical), buttplate (length & height).
The new magazine accepts 110 bbs (reverse-compatibility with short magazines).
The barrel is 330 mm 6.05 brass AEG type. M24x1 outer barrel thread.
Bolt, trigger group, receiver & feeding system are the same & compatible with TAC 41 P.
4 colors are available : Black, Flat Dark Earth, Olive Drab & Wolf Grey.
Available in September 2022.
TAC-41 A: silverback-airsoft.com/blt-31https://www.silverback-airsoft.com/blt-31
Aluminium chassis alone: silverback-airsoft.com/stk-35
Long magazine: silverback-airsoft.com/mag-31
Music: Funk Rock Instrumental - Mironov Sound (soundcloud.com/mironovsound/funk-rock-instrumental)





![Carbon barrel extension: tutorial
1) Mounting options
These Carbon barrel extensions are designed to be used directly on our 24mm threaded outer barrels: SRS G-Spec barrels (A1 & A2) and SRS Sport barrels (16’’ & 20’’). To use these extensions on any other barrels, you will have to use a DT muzzle brake (please check references SBA-FHD-06 https://www.silverback-airsoft.com/product/srs-30-muzzle-brake-model-a2/ & SBA-FHD-07 https://www.silverback-airsoft.com/product/srs-338-muzzle-brake-model-a2-dtss-silencer-compatible/), and a set of timing shims (please check reference SBA-SIL-06 https://www.silverback-airsoft.com/product/fine-tuning-shim-set-for-muzzle-brake/). To properly time the muzzle brake, please refer this video : https://www.youtube.com/watch?v=829ujuwRL6Q&t .
You can skip the timing procedure if (and only if) you screw the muzzle brake all the way onto the outer barrel thread, ending in an unrealistic position.
2) Inner barrel length
Please refer to the chart (https://www.silverback-airsoft.com/pdf/CBX_user_manual.pdf) to know the maximum inner barrel length of your personal configuration. For concentricity reasons, we suggest you also to respect a minimum inner barrel length (100 mm shorter than the maximum length). Your carbon barrel extension is delivered with barrel spacer(s) (1 piece for the XS model, 2 pieces for S/M/L models, and 3 pieces for the XL model). Install a barrel spacer at the inner barrel muzzle extremity, and if necessary, distribute the others on the protruding inner barrel. Additional barrel spacers can be purchased separately (please check reference SBA-BBS-11).
3) Muzzle-Handguard offset
Please refer the chart to know the distance between the carbon barrel extension muzzle and the front face of the handguard. If the distance is negative, that means the carbon barrel extension muzzle will sit inside the handguard.
4) Integral silencer use
It is possible to use your carbon barrel extension as integrally suppressed barrel by using up to 100 mm (suggested) of foam filling on the muzzle side of your carbon barrel extension. Please check the reference SBA-SIL-18 for additional information.
Music credit: Fatal Bazooka - Fous Ta Cagoule [Instrumental] Carbon barrel extension: tutorial](https://i.ytimg.com/vi/mYhFC2TVasE/mqdefault.jpg)




