WaxModeTurtle Wax ICE Seal N Shine has been updated for 2020! The chemical resistance has been even further improved on in the short term, and it has a different grape style fragrance compared to the previous scent. It's still very similar in wipeability and heaviness compared to the first formula, so make sure you do not over apply this to your car. In this video I run a hydrophobic rinse test for both versions of Seal N Shine, then I perform a chemical strip test using Poorboy's World Strip Down to test for the chemical resistance of each spray sealant.
(Note: Amazon might not have the latest formula in stock at the release of this video, it may take some time for them to refresh their stock with the new version.) I was able to purchase the newest Seal N Shine over-the-counter recently at Advance Auto Parts for $12.
The paint for this test was prepped using Sonax Perfect Finish, followed up with Klean Strip Prep-All, then the new Seal N Shine was applied to the right half of the hood, and the first version was applied to the left half of the hood. 24 hours was allowed for the products to cure before performing the wash and rinse with CarPro Reset, as well as the strip wash test using Poorboy's World Strip Down.
I'm still an advocate for using Turtle Wax ICE Spray Wax or the ICE Spray Detailer as a maintenance product for Seal N Shine. I don't like to use Seal N Shine as a topper over itself after a quick wash, it's a big too heavy for my preference to use it like this. ICE Spray Wax is going to complement Seal N Shine excellently for maintenance.
Also, as I discussed in the video, use Seal N Shine sparingly to avoid streaking, especially on darker paints. I recommend having a damp microfiber towel ready to level out any potential streaks for Seal N Shine, this is extremely effective at removing smears and unevenness cause by an overapplication. Gloss levels look good, very comparable measurements were read after washing Seal N Shine with CarPro Reset, compared to the post-polishing measurements after using Sonax Perfect Finish.
Disclaimer: This is NOT a sponsored video. All products shown in the video were purchased by myself for independent testing and review. Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links.
0:00 Intro 1:31 Panel Prep & Gloss Walkaround 2:34 First Initial Rinse 3:50 CarPro Reset Wash & Rinse 5:10 Air Blower Test 5:46 Poorboy's Strip Down Wash 7:50 Poorboy's Strip Down Rinse 8:56 CarPro Reset Follow-up Wash & Rinse 10:01 Poorboy's Strip Down Heavy Wash & Rinse 11:31 Application Residuals Test 12:21 Application Demo & Tips 14:30 Improper Application Demo 15:18 Final Thoughts & Recap
Turtle Wax ICE Seal N Shine - New 2020 Update! Even Better Chemical Resistance!WaxMode2020-06-03 | Turtle Wax ICE Seal N Shine has been updated for 2020! The chemical resistance has been even further improved on in the short term, and it has a different grape style fragrance compared to the previous scent. It's still very similar in wipeability and heaviness compared to the first formula, so make sure you do not over apply this to your car. In this video I run a hydrophobic rinse test for both versions of Seal N Shine, then I perform a chemical strip test using Poorboy's World Strip Down to test for the chemical resistance of each spray sealant.
(Note: Amazon might not have the latest formula in stock at the release of this video, it may take some time for them to refresh their stock with the new version.) I was able to purchase the newest Seal N Shine over-the-counter recently at Advance Auto Parts for $12.
The paint for this test was prepped using Sonax Perfect Finish, followed up with Klean Strip Prep-All, then the new Seal N Shine was applied to the right half of the hood, and the first version was applied to the left half of the hood. 24 hours was allowed for the products to cure before performing the wash and rinse with CarPro Reset, as well as the strip wash test using Poorboy's World Strip Down.
I'm still an advocate for using Turtle Wax ICE Spray Wax or the ICE Spray Detailer as a maintenance product for Seal N Shine. I don't like to use Seal N Shine as a topper over itself after a quick wash, it's a big too heavy for my preference to use it like this. ICE Spray Wax is going to complement Seal N Shine excellently for maintenance.
Also, as I discussed in the video, use Seal N Shine sparingly to avoid streaking, especially on darker paints. I recommend having a damp microfiber towel ready to level out any potential streaks for Seal N Shine, this is extremely effective at removing smears and unevenness cause by an overapplication. Gloss levels look good, very comparable measurements were read after washing Seal N Shine with CarPro Reset, compared to the post-polishing measurements after using Sonax Perfect Finish.
Disclaimer: This is NOT a sponsored video. All products shown in the video were purchased by myself for independent testing and review. Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links.
0:00 Intro 1:31 Panel Prep & Gloss Walkaround 2:34 First Initial Rinse 3:50 CarPro Reset Wash & Rinse 5:10 Air Blower Test 5:46 Poorboy's Strip Down Wash 7:50 Poorboy's Strip Down Rinse 8:56 CarPro Reset Follow-up Wash & Rinse 10:01 Poorboy's Strip Down Heavy Wash & Rinse 11:31 Application Residuals Test 12:21 Application Demo & Tips 14:30 Improper Application Demo 15:18 Final Thoughts & Recap
#sealnshine #turtlewax #autodetailingGLOVEBOXRx | WaxMode ShowcaseWaxMode2022-02-25 | Welcome back to the channel! Huge shoutout to Brad, Jason, and Fred over at GloveBoxDetail.com for sending me their latest product innovation, the GLOVEBOXRx cartridge-based detailing starter kit!
Use coupon code WAXMODE for 20% off of your order!
GLOVEBOXRx is a cartridge-based refilling concept. They're offering their own formulations of their Waterless Wash, Spray Wax, Interior Cleaner, and Glass Cleaner, allowing you to save up on space by providing compact detailing concentrates in a cartridge form to reload your supply when empty. By using your own water supply, you can remove the confusion of dilution ratios and lessen the waste of throwing out empty bottles and sprayers, just refill using GLOVEBOXRx cartridges and you're good to go!
This video is an overview of the Starter Kit, I plan on working much more with their individual products to see how they stand up to the rest of the market in terms of performance. Stay tuned for additional videos in the future, and be sure to leave your feedback below in the comments to let the team know what you would like to see from them in the future, or any changes you would like to see of the system itself that would make it more enjoyable for you to use.
Overall, I'm loving the concept and the idea, this is a fresh new idea and really something that will come in handy especially for those of us that are really going through a lot of product quickly with high volume details. The bottles feel stout and sturdy, with a quality sprayer top and easy to use cartridge system. All four products current have the same scent, which is a nice clean/fresh scent. Being able to fill from a community water source and removing the gallons of pre-mixed products on the shelf will save on shelf space, completely eliminating the risk of spilling costly detailing chemicals and concentrates.
The Waterless Wash is a pure cleaner, with no lasting polymers added into the formula. Follow up with their carnauba-based Spray Wax for a super slick, glossy, and easy-to-use topper that you can use on a variety of different forms of protection. The Interior Cleaner is a great all-around cleaner that can be used on all types of interior surfaces like leather, vinyl, and plastics. With no protection added in, this gives you the option to follow up with your dedicated protectant, or keep the interior surfaces bare for that perfect OEM look. The Glass Cleaner is ammonia-free, safe to use on all glass types with no fear of ruining any window tint film.
Each product inside of the Starter Kit includes their accompanying quality microfiber towel sourced by The Rag Company who are one of the absolute leaders in the microfiber business for detailing!
Stay tuned, I've purchased the entire new Gyeon EVO lineup of coatings and have begun testing, videos of these will be posted as I go through the tests. Cheers!
#GloveBoxDetail #GLOVEBOXRxEthos Ceramic Matrix Coating | Rinse TestWaxMode2021-01-04 | This is a rinse test of the new Ceramic Matrix Coating from Ethos Car Care. Ceramic Matrix is rated as a 3+ year 9H coating certified by SGS and made in the USA. At $75 for 50ml, this is Ethos' lower priced option for users to net two coats on any car or truck, coming at a lower pricepoint than the Graphene Matrix Coating.
Two coats of the Ceramic Matrix Coating were applied to the left half of the test panel, and two coats of the Ethos Graphene Matrix Coating were applied to the right half of the panel. The paint was prepped using 3D One Hybrid Compound and Finish Polish, followed up with Sonax Perfect Finish, then Ethos Detox to clean up any remaining polishing oils prior to applying the coatings.
1 hour was given in between coats before applying the second coat on top, then 14 days were given for both coatings to cure on the surface prior to this first rinse test.
Overall, the hydrophobics are top notch for both coatings, and the properties are quite similar between them yielding similar levels of gloss, slickness, ease of use, and water behavior. Many coatings on the market require separate durable topcoats to achieve similar levels of hydrophobicity, whereas these coatings can achieve this by themselves without a different topcoat. This combined with the ease of use and relative improved slickness makes these both a very attractive coating offering in my opinion.
It's likely going to take time to decipher if whether or not the graphene oxide as an additive to paint coatings will exhibit greater performance traits, but the reality is sio2 based coatings have yielded excellent durability for many years, and if this Ceramic Matrix Coating can offer competitive durability over the years, then it could prove to become one of my favorites.
0:00 - Intro 0:30 - Test Preparation 1:06 - First Rinse 2:00 - Air Blow Dry 2:39 - First Wash & Rinse 3:51 - Gilmour Flood Nozzle Test 5:21 - Final Thoughts
#EthosCarCare #CeramicMatrix #GrapheneMatrix
Disclaimer: The links above may contain Amazon Affiliate links. I receive a small portion of sales as a result of buying these products if you've done so after clicking these links. This helps support the channel for additional content, I appreciate your support!
Note: Although this is not a paid sponsorship from Ethos, Tim reached out to me and sent me their Ceramic Matrix Coating for testing and my personal review. The information and results showcase my honest feedback discovered during testing.The Last Coat 2.0 | Turtle Wax ICE Seal N Shine (Improved) | 4 Months Durability UpdateWaxMode2020-10-22 | This is a 4 months durability update video for The Last Coat 2.0 (TLC2), and Turtle Wax ICE Seal N Shine (improved formula). Overall their hydrophobic performance has diminished over the months, however there's still ample evidence of performance remaining in both sections as shown in the results.
Both of these are capable of months of unmaintained performance when used as your base layer protectant, but the value provided by Seal N Shine at around $10 for 16oz makes it a very attractive choice, especially with the updated formula.
Only one coat of TLC2 was applied to the left half of the rear quarter panel from the rear of the car to the right edge of the gas cap. One coat of Seal N Shine was applied to the right half of the quarter panel and up the C pillar.
Prior to applying these 4 months ago, the paint was prepped using Jescar Correcting Compound, followed up with Sonax Perfect Finish and Klean Strip Prep-All. This car is a daily driver, ungaraged, enduring the central Florida environment.
No maintenance toppers have been used on these sections, the only soap used to wash the paint has been CarPro Reset.
The towel used to dry the paint was the CarPro DHydrate, this is a twisted loop microfiber drying towel. The reason I rinse after drying the paint off is purely for testing purposes. As protectants lose their hydrophobic behavior, many times their surface tension left behind that provides that water repellency can be further reduced during the wash process. The wiping with the drying towel helps resolves some of this, as evidence through a revival of some of that surface tension provided by the protectants. Many times users count their protectants out a bit early, when really they've only been temporarily hindered until wiped dry.
Saying that, I recommend reapplying protectants often, or using maintenance toppers to help prolong the durability of the base layer protectants. In the case of Seal N Shine, the latest Turtle Wax Ice Spray Wax would be the ideal topper to maintain it, this can be used after every wash. With TLC2, you can reapply this on a very regular basis itself after your maintenance washes until your next decontamination and polishing stages.
Disclaimer: This is not a sponsored video, I received the TLC2 from one of the previous GloveBoxDetail Deluxe boxes, and Seal N Shine was purchased by myself for individual testing. The Amazon links above are affiliate links, I receive a small percentage of sales if viewers purchase products through these links. If you're interested in trying products out based on the performance as shown in my videos, this is an opportunity to help support the channel for future testing.
Two coats of the Ceramic Spray Coating were applied to the front passenger door, and two coats of the Ceramic Polish & Wax were applied to the rear passenger door. This is a pure durability test, no maintenance toppers have been used throughout the entire duration of this test. The paint has been routinely washed using CarPro Reset as my wash soap, in this specific video the paint was last washed 10 days ago before the pre-rinse.
Overall, the performance has certainly been diminished, resulting in a much slower sheeting rate. However there is still evidence of survival, as the water is not fully clinging to the paint as it has with other protectants that fully failed. Especially after the towel drying with the CarPro DHydrate twisted loop microfiber, a revival of the surface tension of the paint is evidence of the continuing survival of both protectants.
These are solid options to use as your base layer protectants. Anything that can exceed 6 months of longevity without maintenance toppers is a fantastic option to use as a base protectant, pair these up with the Hybrid Solutions Ceramic Wet Wax to use as your drying aid during your maintenance washes and you will have a fantastic combo that will get you through until your next decontamination and polishing cycle.
Prior to applying these 7 months ago, the paint was clayed and then polished using 3D One Hybrid Compound and Polish, followed up with Sonax Perfect Finish. The paint was then panel wiped using Klean Strip Prep-All. This car is driven regularly, it has not been garaged at all throughout the duration of this durability test.
Disclaimer: Turtle Wax did send me their Hybrid Solutions product line for testing, however this is not a paid sponsorship, the results and feedback provided showcase my honest view of the product during testing. The links above may contain Amazon affiliate links, I receive a small percentage of sales with purchases made through these links, I appreciate your support of the channel!
#HybridSolutions #TurtleWax #CeramicSprayCoating #AutoDetailingSeptember 2020 Deluxe GloveBox Unboxing!WaxMode2020-09-26 | This is an unboxing for the September 2020 Deluxe GloveBox.
GloveBox is a monthly subscription based detailing service, providing quality detailing products each month that are hand picked by Brad Mills who is a professional detailer based out of Chicago, IL.
For more information about the type of subscription plans and gift boxes that GloveBox Detail offers, check them out at their links below:
The September 2020 Deluxe GloveBox comes packed with the Wizards Mist-N-Shine Detailer, a cherry scented slick maintenance topper for waxes and sealants. You can also use it for light cleaning and touchups, and also as a clay lubricant. This paired up really well with the included super soft GloveBox branded edgeless 500GSM microfiber towel. wizardsproducts.com/products/mist-n-shine
Next up is the Lithium Quench Hydration Wax. This is a wax designed to moisturize dry paint, whether it's single stage paint or clear coated paint, this contains various oils to penetrate through to attack the dryness without containing abrasives or harsher chemical cleaners inside of the formula. Super easy to apply and remove to the paint, you can buff off shortly after applying or wait up to 30 minutes before removing. Really nice light grape scent to the formula. Pair this up with the included Wizards Detail Hand Pad for a comfortable application method. lithiumautocare.com/collections/all
Next up is the Jax Wax Glass Cleaner, this is a quality glass cleaner designed to be tint safe, as well as safe to use on navigation screens, this worked perfectly when paired with the GloveBox branded orange microfiber waffle weave towel. jaxwax.com/collections/glass-care/products/jax-glass-cleaner
By purchasing the Essentials subscription plan for $20 a month, you will receive 5-7 sample size products every month, which is a great way to develop your preferences, trying smaller sizes without committing to a full size purchase on something that you may not enjoy.
By purchasing the Deluxe subscription plan for $35 a month, you will receive 5-7 full sized products, a great way to expand your collection and work with products that are competitive and high quality that you might not have thought about trying out before.
They also have a build your own box solution, where you can select from a range of products to piece together your own gift boxes, taking some of the surprise out of the equation but you can select the products that best fit your desired need for detailing.
Disclaimer: This video is a sponsored video, however no exchange of money was given, and no commission is being given for me to showcase their service. I'm happy to support Brad in his business, he is a true enthusiast and professional that has an immense passion for detailing.
Big shoutout to Brad Mills at GloveBox again for his willingness to reach out to me and send me some of his kits, check out some of his professional detailing work at his Instagram: instagram.com/aluxurydetailing
#gloveboxdetail #autodetailingEthos Graphene Matrix Coating | Chemical Resistance TestWaxMode2020-09-11 | This is a chemical resistance test video for the new Ethos Graphene Matrix Coating. Using Poorboy's World Strip Down, Dawn POWERWASH, and Super Clean aerosol, I test just how well the coating holds up to full saturation and agitation of these cleaners into it.
This test is 3 weeks since applying two coats of Graphene Matrix to the test hood. This is also the first time that I've washed this test hood using CarPro Reset as my wash soap. The paint was prepped with 3D One Hybrid Compound & Polish, followed up with Sonax Perfect Finish and Ethos Detox prior to the original application of the coating. 1 hour was waited before applying the second coat of the Graphene Matrix Coating on top of the first coat.
Overall, you can see that with these three heavier chemical cleaners, the Graphene Matrix Coating was able to easily resist them to a very high level. Although you would assume all coatings to perform at this level, the reality is many different coatings on the market have different levels of chemical resistance.
Now, even though this performance is strong, it's still not necessarily an indication of the coating's long term performance in a real world test on a daily driver. However, it does highlight a strength to possibly be able to resist some harsher chemicals that one may find especially if they tend to use a lot of touchless washes that are exposed to harsher chemical cleaners.
My first impressions of this coating remain strong, I think it's really well balanced, continuing to show outstanding hydrophobic performance, great chemical resistance while also being very easy to apply and level out, and great lasting slickness and gloss. Stay tuned for durability updates on the daily driver!
Disclaimer: Tim from Ethos Car Care sent me this bottle of Graphene Matrix for testing and review. However this is not a paid sponsorship, I reserve all rights to review and provide my honest feedback for the performance of the products that I receive for testing. The Amazon links above are affiliated links, I receive a small percentage of sales as a result of clicking and making purchases from these Amazon links.
#EthosCarCare #GrapheneMatrix #GrapheneCoating #AutoDetailing #CeramicCoating5 Month Update Wash | Wolfgang Uber Ceramic Spray CoatingWaxMode2020-09-08 | This is a 5 month durability update for the Wolfgang Uber Ceramic Spray Coating. I have one coat on the left half of the bumper facing the car, and two coats applied to the right half of the bumper. The 2nd coat was applied 3 weeks after applying the first coat on the right half. No spray detailers or maintenance toppers have been applied to their sections throughout this durability test, the performance you're seeing is Uber Ceramic Spray Coating by itself.
The wheels have 2 coats applied to them going on 3-4 months of total durability. This has been fantastic for the wheels, I only need to wash them using a standard soap like CarPro Reset. Overall, great performance across the board for both the one and two coat sections. I recommend two coats for more consistent performance, then you can maintain with a variety of different toppers.
Disclaimer: This is not a sponsored video, all products shown and discussed have been purchased by me for independent testing.
#WolfgangUber #CeramicSprayCoating #AutoDetailing
0:00 - Intro 0:42 - Pre-Wash Rinse 1:45 - CarPro Reset Wash & Rinse 3:04 - Pre-Wash Rinse | Wheels 3:42 - OutroEthos Graphene Matrix Coating | First Wash at 1 WeekWaxMode2020-08-31 | This is a first wash video for the new Ethos Graphene Matrix Coating. I applied two coats to the entire rear section of the blue test Honda, officially beginning the durability test on this daily driver. I will continue to keep an eye on this coating and provide durability updates as time goes on.
The rear section was prepped with a thorough decontamination, testing Adam's Strip Wash followed up with a variety of different water spot removers, then CarPro's IronX, and afterwards a fine grade Nanoskin Autoscrub Sponge with McKee's 37 N-914 as a lubricant to clay and pull the embedded contamination out of the surface. The paint was then polished with abrasives using 3D One Hybrid Compound & Polish, then Sonax Perfect Finish. I followed this polishing up with Klean Strip Odorless Mineral Spirits, then Ethos Detox as a panel wipe.
Two coats of the Graphene Matrix Coating was applied to the rear sections, the second coat was applied 1 hour after the first coat. Surface temperatures averaged around 90°F inside of the garage during this application, I had no issues leveling the coating after applying it, it remained very easy to work with and provided a slicker surface than most coatings I've used.
The car was then pulled out of the garage and remained dry for about 1 full day before the first central Florida rains hit the coated sections. The car was then daily driven and remained ungaraged during this entire first week, enduring daily rainstorms and high heat and humidity. Prior to this first rinse, we had a light rain shower hit the area which is why there is standing water at the start of the video. The soap used to wash the paint was CarPro Reset.
Overall, the coating held up absolutely fantastic, boasting some of the best hydrophobics I've seen. It also remained relatively clean during this first week even after a good amount of driving through rain showers. I can see some spotting towards the bottom right section of the bumper during the pre-rinse popped up, however this was entirely cleaned up after the wash with Reset. I did not notice any weak or inconsistent areas of the coating after the wash & rinse, despite the application environment not being ideal, and despite the first week curing phase being a bit chaotic with regular rainstorms.
The slickness felt through the wash mitt was absolutely fantastic, the mitt really glided well across the coating. After I had dried the paint it remained slick after pulling out a clean microfiber towel over it to check.
Disclaimer: Tim at Ethos Car Care sent me this bottle of the Graphene Matrix Coating for individual testing and review, however this is not a paid sponsorship. My subscribers will always receive my honest thoughts and feedback of the products that I'm working with. The Amazon links above are affiliate links, I receive a small percentage of sales when users click and purchase these products on Amazon. The Ethos links are not affiliated.
The short term results of this coating are quite fantastic, but the true test will be to see how this coating holds up against the test of time through the elements on the daily driver. Stay tuned for additional durability update videos!
0:00 - Intro 0:41 - First Rinse 1:41 - CarPro Reset Wash & Rinse 3:48 - Air Blower Dry 5:16 - Final ThoughtsEthos Graphene Matrix Coating | Hydrophobic Rinse TestWaxMode2020-08-24 | This video is a short hydrophobic rinse test for the new Ethos Graphene Matrix Coating. I applied two coats to the test hood, the second coat was applied 1 hour after the first coat, and then this first rinse is 48 hours after applying the second coat.
The paint was prepped with 3D One Hybrid Compound & Polish, followed up with Sonax Perfect Finish and Ethos Detox.
First impressions of working with the Graphene Matrix coating are great, definitely easier to apply and level out compared to one of my favorites, CarPro CQUK 3.0. It also provides a slicker finish. So the real test will be to see just how well the Graphene Matrix Coating holds up in the durability test on the daily driver. Recommended dry time after applying the coating is 3-5 minutes before buffing and leveling, apply an additional coat 1 hour after the first coat, and then wait 48 hours minimum before exposure to water.
In terms of hydrophobic performance, this is definitely up towards the top of the list for coatings that I've worked with. Graphene Matrix, CQUK 3.0, Gyeon Syncro, Gtechniq CSL + EXO, and Sonax CC36 are all contenders for providing an extremely hydrophobic finish. Of these, only the Graphene Matrix and CQUK 3.0 are single application coatings that do not require a two-part base coat top coat application to provide extreme hydrophobic performance.
Definitely stay tuned to the channel for additional updates and tests, the coating needs more time to continue to further cure before washing with cleaners and performing chemical resistance testing.
Disclaimer: Tim from Ethos Car Care sent me this bottle of Graphene Matrix for testing and review. However this is not a paid sponsorship, I reserve all rights to review and provide my honest feedback for the performance of the products that I receive for testing.
0:00 - Intro 0:21 - First Rinse 1:37 - Air Blow Drying 2:07 - Gloss Walkaround 2:25 - Gilmour Flood RinseCarPro CQUK 3.0 | CQuartz TiO₂ | 2+ Year Update & Rapidwaxx TopperWaxMode2020-08-21 | This is a durability update video for the CarPro CQUK 3.0 and CQuartz TiO₂ coatings at 2 years and 4 months of total durability. I also recently topped these with Polish Angel Rapidwaxx after the last wash which was just over a month ago. Rapidwaxx is a fantastic coating topper, I did not notice any incompatibility issues using it on top of the CQuartz coatings.
I could not be happier with how the coatings have held up over the years with regular maintenance. I have had good luck with the coatings not being clogged up with the various spray toppers that I began using once I started to notice the original hydrophobic performance begin to diminish. As such, I'm very much an advocate for experimenting and finding the spray topper that will work for the coatings you're using once they begin to show signs of being a bit tired.
Your results may vary, there have been users of the coatings that have seen diminished performance after topping, but for the majority of the spray toppers that I have used they have performed quite well. Only one coat of the actual coatings themselves were applied to their sections of the paint, CQUK 3.0 at the front driver's door, CQuarts TiO₂ at the rear door.
Disclaimer: This is not a sponsored video. All products discussed and shown in the video were purchased by me for independent testing and review. The Amazon links above are affiliate links, I receive a small percentage of sales as a result of purchasing from these links. The Esoteric link for Rapidwaxx is unaffiliated, but I'm definitely a fan of Todd's channel! Check him out at: youtube.com/user/EsotericAutoDetail
#CarPro #CQuartz #CQUK #AutoDetailing #CeramicCoatingDawn Powerwash Strip Wash Test vs. Zymol Carbon WaxWaxMode2020-08-13 | There's a new kid on the block from Dawn, and it has some SERIOUS cleaning power. In this video I put the new Dawn Ultra Platinum POWERWASH Dish Spray to the test to see if it can remove my carnauba wax from the paint.
My wax of choice for the test was Zymol Carbon, a carnauba based wax known for its awesome hydrophobic behavior when fresh. The paint was prepped using Menzerna 3800, followed up with Klean Strip Odorless Mineral Spirits, and then one coat was applied to the paint. This first rinse was performed 18 hours since applying the wax on top.
Dawn Powerwash was applied to the right half of the hood for this test, and Dawn Ultra 3X Dish Soap was used on the left half of the paint.
Below are my previous tests using Dawn Ultra Dish Soap against different waxes and sealants: Will Dawn Ultra Remove Your Carnauba Wax: youtu.be/HqqUzs3Ft4Y Will Dawn Ultra Remove Your Wax/Sealant: youtu.be/1IeJsOR3V6g
Disclaimer: This is NOT a sponsored video, all products seen in the video were purchased by me for independent review and testing. The Amazon links above are affiliate links, I receive a small percentage of purchases from these links. Stay tuned for more tests!
#DawnPowerWash #DawnUltra #DawnStripWash
0:00 - Intro 0:57 - Panel Prep & First Rinse 1:41 - Dawn Powerwash Application 3:11 - Dawn Powerwash Rinse 3:58 - Dawn Ultra 3X Soap Wash 4:52 - Dawn Ultra 3X Soap Rinse 5:39 - Towel Dry & Rinse 6:51 - Dawn Powerwash Spray & Rinse 7:53 - Strip Wash & Wax Removers Overview 9:08 - OutroPolish Angel Connoisseur Rapidwaxx | Incredible Spray Wax!WaxMode2020-08-05 | I've tried three products from Polish Angel over the years, and all three of them are some of my absolute favorite spray protectants I've ever used. Rapidwaxx is the least expensive of the bunch, at $45 for 500ml, or $25 for 200ml, this is a spray wax designed to get your feet wet in the Polish Angel experience, which is nothing short of absolute magic.
Extreme hydrophobics, a simple application process, an addictive silky smooth finish, and some of the best gloss and depth you'll ever see. These are some of the properties that you will find in the Polish Angel world of detailing wizardry. Detailing is about satisfaction, and Rapidwaxx delivers completely on the satisfaction journey of turning paint maintenance into a process to enjoy and cherish, rather than to loathe.
In this test I've placed Rapidwaxx up against Polish Angel High Gloss, to test for short term hydrophobic performance, and the resilience against the aggressive Poorboy's World Strip Down wax/sealant remover. The paint was prepped beforehand using Menzerna 3800, followed up with CarPro Eraser before applying Rapidwaxx to the left half of the test hood, and High Gloss to the right half. 3 days were allowed before performing the first rinse.
Rapidwaxx is a fantastic spray wax, you can use this on all exterior surfaces, and also as a drying aid before drying the paint to assist in water retention while leaving behind competitive protection. Rapidwaxx is also a silicon-dioxide and titanium-dioxide blend mixed with carnauba to provide a warmth and depth that rivals that of quality carnauba based paste waxes, with the ease of use of a quick spray wax. With an estimated durability of 4-6 months from Polish Angel themselves, it would be difficult to not want to pull this out after every single wash to maintain the finish.
By utilizing a thicker formula, a little bit of Rapidwaxx, High Gloss, and Cosmic Spritz travels a long way on the paint. Spray directly on the surface or into the microfiber towel before applying to the paint. Use 1-2 sprays per section, spread with a microfiber towel, and flip the towel over or use a separate dry microfiber to wipe the remaining product from the paint. This product levels out perfectly, leaving behind no streaking which is impressive given how concentrated, thick, and heavy this product is to use.
As good as this product is, Polish Angel's weakness is the much higher pricing that it commands on the market. The products are also unscented, and the labeling and aesthetics of the brand is subpar, plagued by low quality labels that is not something that is acceptable for a product line that is this amazing to work with. Despite those weaknesses, I can't help but be drawn in to the performance and amazing application experience of Rapidwaxx. With similar short term performance compared to High Gloss and Cosmic Spritz, this product is a great value within the brand itself.
Disclaimer: This is NOT a sponsored video. All products have been purchased by me for independent testing and review. The Amazon links above are affiliated links, I receive a small percentage of the sales as a result of using these Amazon links. Stay tuned for more testing!
#PolishAngel #Rapidwaxx #HighGloss
0:00 - Intro 1:09 - Paint Prep & Gloss Walkaround 2:05 - First Rinse 3:26 - First Wash & Rinse 4:26 - Air Blower Test 5:13 - Water Sheeting Test 6:01 - Poorboy's Strip Down Test 7:24 - Rapidwaxx Application Demo 10:08 - Drying Aid Demo 11:24 - Product Consistency 12:25 - Final ThoughtsNew & Improved | Meguiars Ultimate Quik Wax | Ultimate Quik DetailerWaxMode2020-07-28 | New and improved for 2020, Meguiar's Ultimate Quik Wax and Ultimate Quik Detailer are both put to the test in this video to highlight their performance in the consumer auto detailing market.
Ultimate Quik Wax was applied to the right half of the test panel for the first rinse test, Ultimate Quik Detailer was applied to the left half. Two applications of both products were applied for the rinse test, the second coat was applied 4 hours after the first coat. 24 hours was given for the products to cure after the second coat prior to the first rinse.
The paint was prepped using Meguiar's M210 Ultra Pro Finishing Polish with a dual action polisher, followed up with Blackfire Paint Prep to assist in removing any polishing oils from the polishing process. After the initial rinse, the paint was washed using Meguiar's Hyper-Wash, then Poorboy's Strip Down was used to test the chemical resistance capabilities of the products.
For the application demonstration, Meguiar's Hybrid Ceramic Liquid Wax was applied as the base layer protectant to showcase how each product behaves when used as a maintenance topper for the wax.
Ultimate Quik Wax is one of my favorite maintenance toppers that I've used over the years. This is perfect for using after your regular washes in order to maintain the base layer wax/sealant/coating that you currently have on the paint. It will leave behind more protection and provide more intense water beading compared to the Ultimate Quik Detailer. It also has the ability to stack performance with a second coat applied on top, as demonstrated in the video.
Ultimate Quik Detailer is a highly lubricated spray detailer that is designed to safely remove light contamination from the paint like dust, smears, streaks, smudges, and the occasional bird bomb. It's also a very capable maintenance topper, it will wipe cleaner than the Ultimate Quik Wax and provide a slicker finish on the paint.
Both of these are safe to use on a variety of different surfaces, including paint, wheels, trim, vinyl, chrome, plastics, and glass. Be careful using anything on the front windshield of the vehicle, make sure you wipe thoroughly to avoid any visible distortions when driving at night, but I haven't had any issues with either of these products on the front glass, and regular top ups on the side glass with produce a very hydrophobic effect during maintenance washes.
The updated formulas boast even better slickness, gloss, water beading, and protection. The fragrances are some of my absolute favorites, and they're extremely easy to work with. The combination for what each of these products offers me for the price makes them some of my absolute favorites out of the many different types of spray detailers and maintenance toppers that I have on the shelf.
Disclaimer: This is NOT a sponsored video. All products shown the video were purchased by me for independent testing. The links above may be Amazon affiliated, I do receive a small percentage of sales made through these links.
0:00 - Intro 1:27 - Panel Prep & Gloss Walkaround 2:23 - First Rinse 4:12 - Meguiar's Hyper-Wash & Rinse 5:23 - Application Demo 7:59 - Topping Behavior Test 10:01 - Poorboy's Strip Down Rinse 10:39 - Ultimate Quik Wax Stacking Test 12:34 - Final ThoughtsTurtle Wax ICE Seal N Shine (Improved Formula) | The Last Coat 2.0 | 1 Month Durability WashWaxMode2020-07-16 | This is a 1 month durability update video and first wash for the improved formula of Turtle Wax ICE Seal N Shine, and The Last Coat 2.0! The paint was prepped using Jescar Correcting Compound, followed up with Sonax Perfect Finish and Klean Strip Prep-All. Only one coat of each product was applied to the paint for this specific test. CarPro Reset is the soap I'm using to wash the paint during this test.
TLC 2.0 was applied to the left half of the rear quarter panel, and Seal N Shine was applied to the right half of the quarter panel. This is the first wash since applying the protectants to the paint. The car is an ungaraged daily driver in the central Florida environment which is currently very hot, humid, and wet.
I also have the Turtle Wax Hybrid Solutions Ceramic Spray Coating applied to the rear passenger door, two coats at 5.5 months of durability, and Griot's Ceramic 3-in-1 Wax at 5.5 months as well that was applied to the front driver's side door.
No toppers have been applied to the protectants throughout these durability tests.
Shoutout to both PapaSmurf918 and Brian from Apex Detail for bringing up and emphasizing the importance of exfoliating the paint in order to allow protectants to bond effectively and perform at their maximum performance, especially when the paint is oxidized or weathered.
Disclaimer: This is not a sponsored video. Turtle Wax sent me the Hybrid Solutions Ceramic Spray Coating for individual testing, all others products were purchased by me for individual testing. The Amazon links above are affiliate links, I receive a small percentage of every sale as a result of clicking these links and making purchases.
#TurtleWax #SealNShine #TLC2Hybrid Solutions 3.5 Month Update | Ceramic Polish & Wax | Ceramic Spray CoatingWaxMode2020-07-08 | This is a 3.5 month (16 weeks) update for two coats of both Turtle Wax Hybrid Solutions Ceramic Spray Coating (front door), and Ceramic Polish & Wax (rear door). I also have CarPro CQuartz Lite applied to the rear quarter panel at 3.5 months, and Blackfire Pro Ceramic Coating at over 1.5 years of durability applied to the rear bumper.
Check here for my previous 1.5 month durability update video for these products: youtu.be/lkEqaQCN4Zw
The paint for the Hybrid Solutions and CQ Lite sections was prepped using 3D One Hybrid Compound & Polish, followed up with Sonax Perfect Finish, and then panel wiped using Klean Strip Prep-All. TWO coats of the Ceramic Spray Coating and the Ceramic Polish & Wax was applied to their sections, only ONE coat of CQ Lite was applied to the quarter panel. The second application of the Hybrid Solutions products was applied 1 week after the first initial application, after the paint had been washed using CarPro Reset.
This car is driven regularly, it has not been garaged at all throughout the duration of this durability test. No toppers have been applied to any of the Hybrid Solutions or CQuartz Lite sections.
Disclaimer: Turtle Wax did send me their Hybrid Solutions product line for testing. The CQuartz Lite and Blackfire coatings were purchased by me for individual testing. The links above may contain Amazon Affiliate links, I receive a small percentage of sales with purchases made through these links, I appreciate your support of the channel!
0:00 Intro 0:53 Pre-Wash Rinse 3:04 CarPro Reset Wash 5:26 Microfiber Towel Dry 6:16 Final Rinse 7:59 Final Thoughts
#HybridSolutions #TurtleWax #ceramicspray #autodetailingHybrid Ceramic Liquid Wax | 4 Month Durability Update!WaxMode2020-07-07 | This is a 4 month (18 weeks) durability update for Meguiar's Hybrid Ceramic Liquid Wax, applied to just the rear quarter panel section of the blue test Honda. The paint was prepped using Meguiar's M110 & M210 abrasives, followed up with Klean Strip Prep-All prior to applying the wax to the paint. The car is a daily driver, ungaraged, and no toppers have been applied throughout the duration of this durability test. The paint has only been washed using CarPro Reset soap on a regular basis.
Overall, at 4 months of durability, Hybrid Ceramic Liquid Wax (HCLW) has been significantly degraded. We've lost the awesome short term hydrophobic performance, and have now shifted over to a hydrophilic behavior.
However, after drying the paint with a fresh clean microfiber drying towel, this is able to remove some of those remaining leftover surfactants that can sap the higher surface tension out of the paint. A physical dry wipe is able to restore some of the hydrophobic properties and surface tension back into the paint, giving us evidence of the survivability of HCLW at 4 months.
It's always tricky to determine actual product survivability of different protectants that have developed a low surface tension on the paint. We cannot be 100% certain and there's plenty of room for debate of when it's proper to acknowledge a full failure of a particular protectant. Based on my observations of the degradation of the wax over time, I can make the determination after the dry microfiber towel wipedown that the wax has indeed survived.
The coating on the left door was CarPro CQuartz at over 2 years of durability, recently topped with Hybrid Ceramic Detailer. The coating on the rear bumper section was the Blackfire Pro Ceramic Coating, also recently topped with Hybrid Ceramic Detailer, approaching 2 years of durability.
Disclaimer: This is not a sponsored video. All products shown have been purchased by me for independent testing. The links above are Amazon affiliate links. Those of you interested in trying out some of the products that I recommend can find these sold on Amazon through these links. I receive a small percentage of the sales as a result of these purchases which I use to fund additional tests. I appreciate your support!
0:00 Intro 0:40 First Rinse 1:35 CarPro Reset Wash & Rinse 3:02 Towel Dry & Rinse 4:53 Outro
#Meguiars #HybridCeramic #AutoDetailingXtreme Solutions Poly-Seal & Magnum Wax!WaxMode2020-06-24 | In this video I cover Xtreme Solutions Poly-Seal and LVR 357 Magnum Wax to showcase their hydrophobic performance, resistance against Poorboy's Strip Down, and an application demo for each product.
This specific test is a layered test, I ran two coats of Magnum Wax across the entire hood, the 2nd coat was applied 24 hours after the first coat. Then Poly-Seal was applied to just the left half of the hood. The paint was prepped beforehand using Griot's Garage Perfecting Cream, followed up with CarPro Eraser as a panel wipe. This first rinse on camera is 24 hours after applying Poly-Seal on top of the left half.
The paint was then washed with CarPro Reset as my wash soap, then Poorboy's World Strip Down was used to perform the strip test. For Strip Down, I lightly misted the panel with water before fully saturating the entire surface with Strip Down, then I pulled out the wash mitt from the Reset bucket and thoroughly agitated just the middle section of the test hood in-between the body creases, the other edges of the panel were just sprayed with Strip Down and rinsed.
Overall, Poly-Seal is certainly a unique spray sealant to work with. You want to work on a wet surface, and then take a damp microfiber towel and spray Poly-Seal directly into this towel, then wipe into the surface. Afterwards, take a fully dry microfiber towel to give it a final wipedown. The result is an incredibly slick surface left behind, with great gloss and strong water behavior. Poly-Seal is designed to be an SiO2 infused polymer based spray sealant, with 3 months of expected durability, perfect for maintenance of your base layer protectant.
LVR 357 Magnum Wax is an amino-resin reinforced acrylic paint sealant, with an expected durability range of up to 6+ months. Not quite as hydrophobic as Poly-Seal, but good hydrophobics. This is an incredibly easy to use paint sealant, with excellent spreading capabilities when applied by hand, and it's super easy to remove after it's dried on the surface. Standard dry time after spreading this on your paint is between 10-15 minutes, this can change depending on your environment and how hot your paint is. Excellent slick surface left behind with great gloss.
Both very enjoyable products to work with, Poly-Seal was one of the most highly requested products that I was asked to try out by my subscribers and I'm having a lot of fun playing around with it. Magnum Wax's ease of use makes it a fantastic option if you want to work by hand, to use after a long session of paint polishing.
Disclaimer: Aaron at Xtreme Solutions sent me these products to try out. This is not a paid sponsorship and I'm NOT receiving any percentage of sales as a result of my subscribers using the WAXMODE10 coupon code at their site. I appreciate their willingness to send me these products in exchange for my honest feedback.
0:00 Intro 1:18 Panel Prep & Gloss Walkaround 2:31 First Rinse 3:21 CarPro Reset Wash & Rinse 4:28 Air Blower Test 5:19 Poorboy's Strip Down Test 6:54 Follow-up Reset Wash 7:40 Magnum Wax Application Demo 11:16 Poly-Seal Application Demo 15:23 Final Thoughts
#XtremeSolutions #PolySeal #MagnumWax #autodetailingHybrid Solutions Ceramic Spray Coating | Griots Ceramic 3-in-1 Wax | 4 Month Durability UpdateWaxMode2020-06-10 | This is a 4 month (18 weeks) durability update for how the Turtle Wax Hybrid Solutions Ceramic Spray Coating and Griot's Garage Ceramic 3-in-1 Wax have held up on the silver BMW test car!
The paint for this test was prepped using Jescar Correcting Compound, followed up with Griot's BOSS Perfecting Cream. The paint was then panel wiped with Klean Strip Prep-All prior to applying the protectants on top. 4 days passed, then the paint was washed with CarPro Reset soap, dried, and a SECOND coat of each protectant was applied to their sections. Hybrid Solutions Ceramic Spray Coating was applied to the rear passenger door, and Griot's Ceramic 3-in-1 Wax was applied to the front passenger door. The rear quarter panel has no protectants applied, and is used as a control for the test. The test car is regularly driven, and has remained ungaraged for the duration of this test. No toppers have been used on top of the products during this durability test.
Below are all of the products that were used or discussed during the video for prep: CarPro Reset (Soap): amzn.to/35drOYZ Jescar Correcting Compound: amzn.to/2VLOTPm Griot's BOSS Perfecting Cream (Finishing Polish): amzn.to/2SdW8NF Klean Strip Prep-All (Panel Wipe): amzn.to/35foi0n
Disclaimer: Turtle Wax sent me the Ceramic Spray Coating for testing, all statements given are my honest opinion of the product in use. Griot's Ceramic 3-in-1 Wax was purchased by myself for individual testing. The links above may contain Amazon Affiliate links, I receive a small percentage from sales as a result of using these links, I appreciate your support!
0:00 Intro 0:47 First Rinse 1:44 CarPro Reset Wash & Rinse 4:07 Outro
#hybridsolutions #turtlewax #griotsgarage #ceramicspray #autodetailing #griotsceramicWolfgang Uber Ceramic Spray Coating | 2 Month UpdateWaxMode2020-06-08 | This is a 2 month durability update for the Wolfgang Uber Ceramic Spray Coating. I decided to split the front bumper up into a 1 coat vs. 2 coat application test. So after 3 weeks on the paint, I decided to top just the right half (driver's side) of the front bumper with a second coat of the spray coating. The left half remains untopped with just 1 coat.
The second application appears to have better staying power, and after 5-6 weeks on the paint without any additional top ups, the 2nd coat has been able to maintain better hydrophobic performance compared to 5-6 weeks of durability out of the single coat application. The paint was washed using CarPro Reset during the video.
Disclaimer: This is not a sponsored video, all products shown and discussed have been purchased by me for independent testing. The links above may contain Amazon Affiliate links, I receive a small percentage of any sales as a result of using these links, this helps support the channel for additional testing. Thank you for your support!
0:00 Intro 0:20 First Rinse 1:19 CarPro Reset Wash & Rinse 3:02 Air Blower Test 3:39 Outro
#wolfganguber #ceramicspray #autodetailingThe Last Coat 2.0 - Hydrophobics & Strip Down Test (TLC1 vs. TLC2)WaxMode2020-05-25 | This is a first look at The Last Coat 2.0, and a direct comparison to my bottle of the first formula that I picked up over a year ago. The Last Coat is a durable paint protectant designed to last months on the paint with one application.
Big thanks to Brad Mills at GloveBoxDetail.com for sending me TLC2 which was included in his January 2020 Deluxe GloveBox kit! If you're interested in trying out GloveBox, visit gloveboxdetail.com, and check out my video that I did a few weeks ago that covers the subscription service in more detail: youtu.be/ryvkwPs7e6c
Note: Use coupon code WAXMODE30 for 30% off your first GloveBox package when you purchase one of the subscription plans!
The paint for this test was prepped using 3M Perfect-It EX Ultrafine Machine Polish, followed up with Klean Strip Prep-All. TLC2 was applied to the right half of the hood, and TLC1 was applied to the left half of the hood. 48 hours were allowed for the products to cure before performing this rinse test. The paint was then washed with CarPro Reset, then tested with Poorboy's World Strip Down to test for chemical resistance.
Overall, TLC2 is a definite improvement in quality over the first formula, showing much better chemical resistance. I also think it levels down better and has better wipeability compared to TLC1. It's a bit heavy, a little goes a long way so don't overapply it, but it's easy to get a clean wipeoff with a dry microfiber towel.
At $35 for 16oz, this is quite the pricey paint sealant and it faces stiff competition compared to other more affordable options. However many detailers and testers have had great results with the new formula, and The Last Coat's ability to listen to feedback and make changes and improvements to the formula is a welcomed sight in the industry.
Disclaimer: This bottle of TLC2 was included in one of the Deluxe kits recently sent over to me by GloveBox. This is not a paid sponsorship, all information provided in the video was my honest thoughts of the product and where it stands in the market. Some of the above links may be Amazon Affiliate links, I receive a small percentage of sales made through these links, thank you all for your support!
0:00 Intro 2:00 Panel Prep & Gloss Walkaround 3:04 First Rinse 4:02 CarPro Reset Wash & Rinse 4:55 Poorboy's Strip Down Application & Wash 6:51 Poorboy's Strip Down Rinse 8:40 Final Thoughts & Recap 9:31 Outro
#thelastcoat #tlc2 #autodetailingCQuartz + Brilliant Shine Detailer = Hydrophobic Magic!WaxMode2020-05-16 | I decided to top the CQuartz and Blackfire coatings with one of my favorites, Sonax Brilliant Shine Detailer to show you guys how it plays on top. The combination leads to absolute hydrophobic bliss!
Sonax Brilliant Shine Detailer was applied 3 weeks ago on top of CarPro CQuartz UK 3.0 on the front driver's door, CQuartz (Tio2) on the rear door, and Blackfire Pro Ceramic Coating on the rear bumper. This is the first wash since applying it on top. Meguiar's Hybrid Ceramic Liquid Wax was applied to the rear quarter panel 2.5 months ago, and is currently undergoing a pure durability test, it has not been topped with anything.
I've been a huge fan of Sonax BSD for a long time now. It's one of the most hydrophobic toppers on the market, smells phenomenal, and is quite durable by itself. It's fairly easy to use although it does have a thicker formula, do not over apply it and you shouldn't run into many issues, it went over great on top of the coated sections. Gloss and paint depth is fantastic, but the product does lack that super slick feeling that you will get with other products. Regular price is $17 for 750ml, however Amazon pricing will fluctuate quite frequently. Those of you who have tried it, I would love to hear your thoughts in the comments!
CQUK 3.0 and CQuartz were first applied 2 years ago on their doors, Blackfire Pro was applied over 1.5 years ago. A variety of different toppers have been applied on top of the coatings since application, most recently Meguiar's Hybrid Ceramic Detailer which gave me great results. Prior to Hybrid Ceramic Detailer, P&S Bead Maker was my topper of choice which also gave me great results and improved slickness.
Overall, I'm very likely to switch coating toppers up given the circumstances I'm dealing with, my desired results, and the age and healthiness of the coatings. Bead Maker was a great topper, especially for the CQuartz coating between 6 months and 1.5 years old. It also performed really well on CQUK 3.0 between 1-1.5 years old. Meguiar's Hybrid Ceramic Detailer worked better once the coatings began to weather more significantly, between 1.5-2 years of durability. In the late game, Sonax Brilliant Shine Detailer works perfectly to increase hydrophobicity to maximum performance, with the tradeoff of a less than slick feeling surface compared to Bead Maker and HCD.
You are not required to use the manufacturer's topper in order to maintain the coatings at a high level, although you could do so with good results as well. Sometimes it takes some experimenting to find the best type of toppers that are working well with the protectants that you've applied to your specific paint.
Disclaimer: This is not a sponsored video, all products shown were purchased by me for individual testing. The links above may contain Amazon affiliate links, I receive a small percentage of sales made through these links, this helps support the channel for additional testing.
0:00 Intro 0:35 Pre-Wash Rinse 2:58 CarPro Reset Wash & Rinse 5:07 Air Blower Test 5:45 Water Sheeting Test (Flooding) 6:59 Final Thoughts & Gloss Walkaround
#sonax #cquartz #ceramiccoating #hydrophobic #autodetailingAtlantique - Zymols $1600 Wax!WaxMode2020-05-12 | This was an impromptu water behavior test of Zymol Atlantique, which currently retails for $1,643 in the U.S. I've been a big fan of the Zymol waxes over the years, and have collected a good portion of their lineup. After completing a gloss measuring test, I wanted to see how Atlantique held up after applying Poorboy's World Strip Down on top in an attempt to knock it down.
Now for this particular rinse test, the paint was prepped using Meguiar's M210 Ultra Pro Finishing Polish, followed up with Klean Strip Prep-All. I then applied 5 coats of Atlantique to the center sections of the paint in-between the body creases, taking gloss measurements after each individual coat in a previous test. Prep-All was used after the 5th coat on the entire panel, then a final coat of Atlantique was applied to the entire panel.
The paint was washed with CarPro Reset after the initial water rinse was performed, then Strip Down was applied to the entire panel. On the left half of the panel, I thoroughly worked Strip Down in using the wash mitt, while the right half was left without agitating. As you can see, the Strip Down was easily rinsed off the right half of the paint, while the left half was diminished.
The center area that previously had 5 coats of Atlantique applied, that was prepped using only Prep-All was behaving with more chemical resistance compared to the left half the body crease, which only had one coat of Atlantique applied. This highlights a potential advantage in multiple coats of protection in terms of performance, and is something I will look into more closely in the future.
If you're interested in trying a Zymol wax out, check in with Carbon or Creame first: Zymol Carbon: amzn.to/2STfO9V Zymol Creame: amzn.to/2zyBWj2
Overall, there is no performance benefit in spending $1,600+ on a paste wax. Zymol commanded a very high level of exclusivity out of their estate glazes when I was just getting started in my detailing journey, and this price was a barrier that tempted a lot of the show car enthusiasts into selecting a detailer that offered them in their services.
However, the paint coatings released in the 2010's quickly took over the professional detailing market by providing a performance unseen and untouched by the waxes which commanded such high prices of exclusivity. Nevertheless, Zymol remains a fantastic paste wax to work with, and boasts incredible hydrophobic performance when fresh, which is quite addicting and satisfying to see in action, and this has driven my desire to collect their lineup.
Disclaimer: This is not a sponsored video, all products showcased were purchased by myself for individual testing and personal use. The links above may contain Amazon affiliate links, I receive a small percentage of the sales made through clicking these links, I appreciate your support!
0:00 Intro 0:28 First Rinse 1:19 Water Sheeting Test (Flooding) 2:02 CarPro Reset Wash & Rinse 2:49 Poorboy's Strip Down Application & Wash 3:44 Poorboy's Strip Down Rinse 5:04 Follow-up Reset Wash 6:56 Final Thoughts & Outro
#zymol #hydrophobicwax #waterbeading #autodetailingGloveBox Detail Unboxing & Introduction!WaxMode2020-05-09 | This video is an unboxing and introduction to GloveBoxDetail.com, a premium car care monthly subscription service. GloveBox was started by Brad Mills, a highly decorated and experienced professional detailer that works on some of the most beautiful and rarest cars I've ever laid my eyes on. Brad reached out to me and offered to send me two of his Deluxe GloveBox offerings to showcase to my subscribers, many of whom I believe would benefit from this type of service.
Note: Use coupon code WAXMODE30 for 30% off your first GloveBox package when you purchase one of the subscription plans!
GloveBox is a great way to introduce you to a wide range of enthusiast and professional detailing products, delivered on a monthly basis to your home in order to remove the confusion and tiring research of a crowded market, so that you can jump right into detailing without the headaches. They have a few different subscription plans available to fit your budget, or you can purchase previously released GloveBox's separately if you're wanting to get your hands on those specific items.
By purchasing the Essentials subscription plan for $20 a month, you will receive 5-7 sample size products every month, which is a great way to develop your preferences, trying smaller sizes without committing to a full size purchase on something that you may not enjoy.
By purchasing the Deluxe subscription plan for $35 a month, you will receive 5-7 full sized products, a great way to expand your collection and work with products that are competitive and high quality that you might not have thought about trying out before.
All products are hand selected by Brad, who uses these on a regular basis in his professional detailing business, so you can be sure that what is being offered inside of each GloveBox has been vetted by a true professional. However, not everyone has the same preferences, this is why offering a variety of different products from different brands is a great way to allow new and experienced detailing enthusiasts the opportunity to become exposed to high quality products on the market in order to better develop their preferences.
Inside of each GloveBox will also contain individual coupon codes for each product's manufacturer or company, so that if you enjoyed working with that product in particular and want to try out other products in their lineup, you can enjoy the coupon code specific to GloveBox on that manufacturer's online website to purchase those products at a discount.
This a value-based service as well, for the January 2020 GloveBox, I received the Jax Wax Tire & Trim Gel ($16), The Last Coat V2 ($35), Wowo's Detailers Shampoo ($12), Autofiber's Korean Plush 16x16 Microfiber Towel ($5), and the Jax Wax Tire Dressing Applicator Sponge ($3). The cost is $35 on this GloveBox, you're receiving upwards of $70 had you purchased these separately on each manufacturer's website. This is an outstanding value!
Check this link to see which manufacturers and detailing companies are being selected from for each GloveBox: gloveboxdetail.com/pages/partners
Disclaimer: This video is a sponsored video, however no exchange of money was given, and no commission is being given for me to showcase this type of service. Brad reached out me, offered me the two Deluxe GloveBox kits, and I was happy to showcase his service to my subscribers, because again I believe a lot of you are going to get a ton of utility for this type of service. I've seen his work in person, I know the quality and effort he puts into his work, he is a top notch professional that performs at the highest of levels in this industry. Let me know what you guys think in the comments below, I would love to hear your thoughts and feedback as always!
Big shoutout to Brad Mills at GloveBox again for his willingness to reach out to me, check out some of his professional detailing work at his Instagram: instagram.com/aluxurydetailing
#gloveboxdetail #autodetailingTurtle Wax Hybrid Solutions - 1.5 Month Durability UpdateWaxMode2020-05-01 | This is a 1.5 month durability update for two coats of the Turtle Wax Hybrid Solutions Ceramic Spray Coating (applied to the front passenger door), and two coats of their Ceramic Polish & Wax (applied to the rear door). I've also applied CarPro CQuartz Lite to the rear quarter panel going through the same 1.5 month durability test. The rear bumper contains the Blackfire Pro Ceramic Coating which is currently at 1.5 years of total durability with various forms of spray toppers applied over its lifetime, which has since been regularly maintained for the last few months with Meguiar's Hybrid Ceramic Detailer.
The paint for the Hybrid Solutions and CQ Lite sections was prepped using 3D One Hybrid Compound & Polish, followed up with Sonax Perfect Finish, and then panel wiped using Klean Strip Prep-All. TWO coats of the Ceramic Spray Coating and the Ceramic Polish & Wax was applied to their sections, only ONE coat of CQ Lite was applied to the quarter panel. The second application of the Hybrid Solutions products was applied 1 week after the first initial application, after the paint had been washed using CarPro Reset.
This car is driven regularly, it has not been garaged at all throughout the duration of this durability test. No toppers have been applied to any of the Hybrid Solutions or CQuartz Lite sections. The paint was regularly washed using CarPro Reset, this is currently the 4th wash. Stay tuned for additional durability updates on this test car!
Disclaimer: Turtle Wax did send me their Hybrid Solutions product line for testing. The CQuartz Lite and Blackfire coatings were purchased by me for individual testing. The links above main contain amazon affiliate links, I receive a small percentage of sales with purchases made through these links, I appreciate your support of the channel!
#hybridsolutions #turtlewax #ceramicspray #autodetailingEthos / Lithium / Fusso Coat - 1.5 Month Durability TestWaxMode2020-04-30 | This is a 1.5 month durability test for Ethos Pro Ceramic Wax, Lithium Seal & Squeal, and Soft99 Fusso Coat.
The paint was prepped using Jescar Correcting Compound, followed up with Griot's BOSS Perfecting Cream. The paint was then panel wiped with Klean Strip Prep-All prior to applying the protectants on top. Ethos was applied to the front driver's side door above the trim, Lithium to the rear door, and Fusso Coat was applied to the rear quarter panel. This car is driven regularly, and is not garaged. No toppers have been used on any of the sections during this test, and only 1 coat of each protectant was applied to their sections.
Below are all of the products that were used or discussed during the video for prep: CarPro Reset (Soap): amzn.to/35drOYZ Jescar Correcting Compound: amzn.to/2VLOTPm Griot's BOSS Perfecting Cream (Finishing Polish): amzn.to/2SdW8NF Klean Strip Prep-All (Panel Wipe): amzn.to/35foi0n
As discussed in the video, neither the Ethos Pro Ceramic Wax or the Lithium Seal & Squeal leave behind a strongly hydrophobic surface, however this doesn't necessarily mean the protection left behind on the paint isn't still effective. Different chemistries play into just how hydrophobic a particular product will be, and although I tend to gravitate toward the hydrophobic monsters, this doesn't invalidate the protection left behind from sealants that aren't crazy beading and fast sheeting sealants. We still have evidence through the water behavior of the survival of both the Ethos and Lithium in this test.
If you're curious about Fusso Coat's performance, you can see it easily powered through this duration with strong hydrophobic durability. Stay tuned for future updates!
Disclaimer: Big shout out to Ethos Car Care and Lithium Auto Elixirs for reaching out to me and sending me the Pro Ceramic Wax and Seal & Squeal for testing! The links above may contain Amazon Affiliate links, I receive a small percentage from sales as a result of using these links, I appreciate your support!
0:00 Intro 0:42 Pre-Wash Rinse 2:06 CarPro Reset Wash 2:39 CarPro Reset Rinse 5:20 Air Blower Test 5:48 Outro
#ethoscarcare #lithiumautoelixirs #fussocoat #autodetailing #soft99Ceramic Spray Duel - Turtle Wax & Griots - 3 Month Durability TestWaxMode2020-04-28 | This is a 3 month durability update for Turtle Wax Hybrid Solutions Ceramic Spray Coating, and Griot's Garage Ceramic 3-in-1 Wax.
The paint was prepped using Jescar Correcting Compound, followed up with Griot's BOSS Perfecting Cream. The paint was then panel wiped with Klean Strip Prep-All prior to applying the protectants on top. 4 days passed, then the paint was washed with CarPro Reset soap, dried, and a SECOND coat of each protectant was applied to their sections. Hybrid Solutions Ceramic Spray Coating was applied to the rear passenger door, and Griot's Ceramic 3-in-1 Wax was applied to the front passenger door. The rear quarter panel has no protectants applied, and is used as a control for the test. The test car is regularly driven, and has remained ungaraged for the duration of this test. No toppers have been used on top of the products during this durability test.
Below are all of the products that were used or discussed during the video for prep: CarPro Reset (Soap): amzn.to/35drOYZ Jescar Correcting Compound: amzn.to/2VLOTPm Griot's BOSS Perfecting Cream (Finishing Polish): amzn.to/2SdW8NF Klean Strip Prep-All (Panel Wipe): amzn.to/35foi0n
Disclaimer: Turtle Wax sent me the Ceramic Spray Coating for testing, all statements given are my honest opinion of the product in use. Griot's Ceramic 3-in-1 Wax was purchased by myself for individual testing. The links above may contain Amazon Affiliate links, I receive a small percentage from sales as a result of using these links, I appreciate your support!
Stay tuned for additional updates!
0:00 Intro 0:36 Pre-Wash Rinse 2:32 CarPro Reset Wash 3:13 CarPro Reset Rinse 4:50 Air Blower Test 5:25 Outro
#hybridsolutions #griotsgarage #ceramicspray #turtlewax #autodetailing #griotsceramicWolfgang Uber Ceramic Spray Coating - 10 Day UpdateWaxMode2020-04-16 | This video is an update of the new Wolfgang Uber Ceramic Spray Coating on the daily driver. The paint was prepped with Griot's Garage Correcting Cream, followed up with Klean Strip Prep-All as a panel wipe. The Uber Spray Coating was applied 10 days ago on the paint. The car was driven 450 miles since applying, this is the first wash and rinse using CarPro Reset as my soap.
I introduce the concept to my subscribers of the "staying power" of the protectants, and how this concept can differ than the overall level of durability of a protectant. Staying power is the ability of the coating or protectant to maintain its hydrophobic performance at a high level throughout its lifetime. Some products, like Zymol Glasur as an example, showcase incredible short term hydrophobic performance. However this extreme performance can be short lived. While other protectants and especially true coatings like CQUK 3.0, can maintain a very high level of staying power by offering incredible hydrophobic performance over a much longer duration. This does not mean Glasur is bad or not durable, as I've seen it be durable at 2.5 months old. But it will not maintain its extreme hydrophobic performance beyond a short time period in the Florida environment.
This is what I'm trying to observe out of the new Uber Ceramic Spray Coating. To see if it can match or outperform the great staying power out of a spray coating like Gyeon CanCoat, which offers great durability. As you can see in the video, Uber Spray Coating is still performing well at 10 days, although I believe the hydrophobic performance has taken a slight dip. I will continue to observe and provide updates as time passes so that we can get a better judge of its performance.
I also showcased the performance of EXOv4 on the left half of the hood facing the car, and Gliss V2 on the right half, both going on 11 months of durability, recently topped with Meguiar's Hybrid Ceramic Detailer 10 days ago. I then showcased the performance of CQUK 3.0 on the front driver's door, and CQuartz TiO2 on the driver's side rear door, both going on 23 months of durability, recently topped with Hybrid Ceramic Detailer 10 days ago.
Disclaimer: This is not a sponsored video, all products shown and discussed have been purchased by me for independent testing. The links above may contain Amazon Affiliate links, I receive a small percentage of any sales as a result of using these links, this helps support the channel for additional testing. Thank you for your support!
#wolfgangcarcare #wolfganguber #ceramicspray #autodetailingNew Hybrid Solutions Ceramic Acrylic Unboxing from Turtle Wax!WaxMode2020-04-01 | Turtle Wax just released two new products in the Hybrid Solutions line, Ceramic Acrylic Black Polish and Ceramic Acrylic Black Wax! This video will be an unboxing of the kit that Turtle Wax sent to me for testing. These will be SiO2 and acrylic polymer based products, an evolution of the technology and chemistry from the Jet Black range with the chemistry pulled over from the rest of the latest Hybrid Solutions lineup.
Check below for the Hybrid Solutions Ceramic Acrylic line currently on Amazon: Ceramic Acrylic Black Polish: amzn.to/2wQcNPW Ceramic Acrylic Black Wax: amzn.to/2X5ss8G
Ceramic Acrylic Black Polish is designed as an all-in-one paint polish and protectant, with the ability to really bring out the gloss and depth on black paint while removing swirls and laying down a good layer of protection in one step. Use with a foam based applicator pad, a microfiber applicator, or on a DA polisher with a foam polishing pad. Retail price is $20.
Ceramic Acrylic Black Wax is designed as a quick and easy way to really boost the depth of black paint while leaving behind some great protection. Although you won't get the level of paint correction as Black Polish, when used together you will have a great combination of correction and protection that made the Hybrid Solutions line so popular. Or use Black Wax by itself as your main form of paint protection while filling some lighter defects. Retail price is $16.
Overall, I'm looking forward to putting these to the test, and seeing how they perform compared to the rest of the Jet Black line, the Ice Black Polish, and the Hybrid Solutions line. Stay tuned for these videos in the future!
Disclaimer: The Hybrid Solutions products were sent to me directly by Turtle Wax for personal testing. Big thank you to the Turtle Wax team for allowing me the opportunity to try them out! The links above may contain Amazon Affiliate links, I receive a small percentage of all products purchased through the Amazon links. Thank you all for your support, stay safe and have fun detailing!
#hybridsolutions #turtlewax #autodetailing #jetblackWolfgang Uber Ceramic Spray Coating - Crazy Hydrophobic!WaxMode2020-03-30 | This video is my first impressions of the new Wolfgang Uber Ceramic Spray Coating.
No curing needed for performance, crazy hydrophobic, easy on/off, dripping with gloss, laughs Strip Down off the paint! Great results so far.
The panel was prepped beforehand using Wolfgang Finishing Glaze 3.0 as a finishing polish, followed up with Klean Strip Prep-All prior to applying the Uber Ceramic Spray Coating on top.
Disclaimer: This is NOT a sponsored video. All products seen in this video have been purchased for individual testing. The links above contain Amazon affiliate links, I receive a small percentage of products purchased through these links, I appreciate your support!
0:00 Intro 0:28 Application Demo 2:53 First Rinse 3:48 Air Blower Test 4:17 CarPro Reset Wash 5:15 Water Sheeting (Flooding) Test 6:22 Poorboy's Strip Down Application & Wash 7:11 Poorboy's Strip Down Rinse 8:09 CarPro Reset Follow-up Wash 9:27 Final Thoughts 10:29 Outro
#wolfgangcarcare #wolfganguber #ceramicspray #autodetailing #hydrophobicNew Meguiar’s Hybrid Ceramic Liquid Wax - WaxMode ReviewWaxMode2020-02-26 | In this video I have the new for 2020, Meguiar's Hybrid Ceramic Liquid Wax in hand for an in depth review of my first impressions for the product. I'll show you a baseline water behavior result, a first person view of its application to the paint, and a chemical resistance test against Poorboy's World Strip Down. I'll also compare it against some of the Meguiar's Ultimate waxes, and perform a topping test using the new Hybrid Ceramic Detailer against Ultimate Quik Wax. If you're interested in trying any of the products that I test, check below in the affiliate links where you can purchase them directly from Amazon:
Hybrid Ceramic Liquid Wax is the newest addition to the Meguiar's sio2 (silicon dioxide) consumer line, this is one of their most durable protectants that you can pick up over-the-counter. Safe for use on paint, plastic trim, vinyl decals, racing stripes, and chrome, finishes. This can be applied by hand or with a dual action polisher, wait 3-5 minutes after applying to the paint for the wax to dry, and then buff off with a clean microfiber towel. This can be applied on bare paint or on top of a wide variety of different waxes and sealants that have already been applied.
Overall, I'm really enjoying the product, it has the crazy hydrophobics to match my preferences and I think it pairs absolutely perfectly with the Meguiar's Hybrid Ceramic Wax and the new Ceramic Detailer. I'm greatly looking forward to trying out the rest of the products Meguiar's has planned for release for 2020, stay tuned for additional testing!
Disclaimer: This is NOT a sponsored video, all products seen tested have been purchased by myself for individual testing, and opinions given reflect my honest views of the products. The links above are affiliated links, I receive a very small percentage from any purchases made by clicking the links, this helps support the channel for additional testing. Thank you all for your support, make sure you share the video if you enjoy it, and get down the comments section for any product recommendations or questions!
#meguiars #hybridceramic #meguiarsultimate #autodetailing #hydrophobicGriot’s Garage Ceramic 3-in-1 Wax - Great First Impressions!WaxMode2020-01-31 | In this video I'm working with the brand new Griot's Garage Ceramic 3-in-1 Wax. I'll share my first impressions and show you the short term hydrophobic performance side by side with the Griot's Best of Show Spray Wax. I'll also test the resilience of the products against Poorboy's Strip Down, and identify if it's absolutely crucial to adhere to the 12-24 hour cure time as recommended by Griot's.
Ceramic 3-in-1 Wax is Griot's new top of the line spray protectant, safe for all exterior finishes with an expected durability upwards of 6 months. The "3-in-1" stands for a combination of its main ingredients, which includes a blend of hydrophobic polymers, silicon dioxide (sio2), and carnauba wax to deliver a blend of protection, durability, and gloss. Two coats are recommended for maximum durability, you can use this as your main form of protection, but also as a topper for a wide variety of different waxes/sealants/coatings. Ceramic 3-in-1 Wax can also be topped with a variety of different toppers as well, including Best of Show Detailer, Spray Wax, Speed Shine, etc.
For this test, the Ceramic 3-in-1 Wax was applied to the left side of the test hood, Best of Show Spray Wax was applied to the right side. The products were given 48 hours before the first rinse was performed. CarPro Reset was the wash soap of choice, the paint was then hammered with Poorboy's World Strip Down in an attempt to remove the freshly applied protectants. I then perform a fresh application of Ceramic 3-in-1 Wax to the paint for a cure validation test, and show you what happens when you rinse, wash, and strip wash it immediately after application without waiting for it to cure.
Disclaimer: This not a sponsored video, the products used in this test were all purchased by me for individual testing. The links above are affiliate links from Amazon, a small percentage of any sales made through the links will be used to fund additional testing, thanks again for your support!
0:00 Intro 1:40 Panel Prep & Gloss Walkaround 2:47 First Rinse 4:06 CarPro Reset Wash & Rinse 5:24 Poorboy's Strip Down Wash 8:34 Poorboy's Strip Down Rinse 10:07 Application Demo 12:20 Post-Application Rinse 12:56 Post-Application Reset Wash & Rinse 13:40 Post-Application Strip Down Wash & Rinse 14:52 Final Thoughts 15:42 Outro
#griotsgarage #ceramicwax #autodetailing #griotsceramicMeguiar’s Hybrid Ceramic Detailer - Perfect Topper for Coatings!WaxMode2020-01-22 | Check out this video to see how well the new Meguiar's Hybrid Ceramic Detailer performs on some of my older, more weathered coatings that I have applied across the test Honda! Overall, Hybrid Ceramic Detailer is a fantastic coating topper, showing an incredible ability to repair and revive the tired hydrophobic behaviors of my coatings. Easy to use, incredible smell, good slickness, great gloss. This is proving to be one of my favorite products that has been released for the 2020 consumer detailing season!
There's a lot being covered in this test. Up until this topping test, none of the coated sections have been washed for 6 months. As a result, the first wash after this time period left me which a bunch of weathered coatings, a lot of their hydrophobic behaviors were no longer up to par and my goal was to find a topper that could repair or revive the hydrophobic elements of the coating. CQUK 3.0 was applied to the driver's side door, CQuartz applied to the rear driver's door, 20 months durability. Blackfire Pro was applied to the rear bumper at 15 months durability. Adam's Ceramic Spray Coating applied to the left side of the rear passenger door, IGL Premier on the right half of this door, 11 months durability. Meguiar's HCW was applied to the left side of the passenger's front door, Mothers CMX to the right half of this door, 11 months durability. On the hood, EXOv4 was applied to the left (passenger) side, Gliss V2 on the right half, 8 months durability.
With the CQuartz coatings and Blackfire Pro, I first applied Bead Maker to try and revive the coatings, with Reload on the left half of CQUK 3.0. Two weeks went by and I showed the rinsing after this wash. With not enough boost in performance, I decided to then apply Meguiar's Hybrid Ceramic Detailer to the entire car, waited two weeks and did a wash and rinse, with a fantastic improvement, revival, and repairing of the hydrophobic nature of the coatings.
The condition of your coating can have a large impact in the performance of your topper, this is why we see a difference in the water behaviors even though everything was topped with HCD at the same time. The condition of your paint without a coating can also have a large impact in the performance of your topper. This is why the water behavior is weak on the quarter panel areas of the cars that were never coated, compared to the coated areas that were extremely strong. Hybrid Ceramic Detailer responds incredibly well to a base layer coating.
Disclaimer: This not a sponsored video, the products used in this test were all purchased by me for individual testing. The links above are affiliate links from Amazon, a small percentage of any sales made through the links will be used to fund additional testing, thanks again for your support!
#meguiars #hybridceramic #ceramicdetailer #autodetailing #cquartzLithium Gloss Sauce & Seal and Squeal - WaxMode ReviewWaxMode2020-01-17 | In this video I put Lithium Auto Care's Gloss Sauce liquid wax and their Seal & Squeal paint sealant to the test while sharing my first impressions of using the products. I also run a topping test using their Luster Lube spray detailer to see how this performs on top of their protectants.
Interested in trying any of the products out? Click below to take you to the product pages on Amazon, any purchases helps support the channel for future testing!
Any questions or comments? Feel free to get in touch with me in the comment section below or at mrwaxmode@gmail.com.
Disclaimer: Although Lithium has sent me their product line for testing, this is not a sponsored video or a paid promotion of their products. The products were not sent in exchange for any reviews or compensation, I will continue to provide my honest feedback and show you the results of my tests even when products have not been purchased by me. The links above are Amazon affiliate links. Thanks for watching guys, stay tuned for additional tests and let me know any product recommendations that you would like for me to try out!
0:00 Intro 1:53 Panel Prep & Gloss Walkaround 3:07 First Rinse 4:56 CarPro Reset Wash & Rinse 5:46 Gloss Measurement Test 8:28 Luster Lube Topper Test 10:54 Air Blower Test 11:48 Poorboy's Strip Down Wash 13:14 Poorboy's Strip Down Rinse 14:50 2nd Poorboy's Strip Down Wash & Rinse 15:22 Follow-up IPA Wipedown & Rinse 15:42 Final Thoughts & Recap 17:18 Outro
#lithiumautoelixirs #gloss #autodetailingNew Turtle Wax Hybrid Solutions - Unboxing and Introduction!WaxMode2020-01-05 | In this video I go through an introduction of the brand new Hybrid Solutions lineup from Turtle Wax. Their team reached out me, invited and flew me out to their awesome product unveiling event in Scottsdale Arizona, and they've sent me the entire new Hybrid Solutions line to try out and have some fun with! I'm super excited, 2020 is ramping up to be an incredible year for product releases and testing, with an evolution of the consumer market we're seeing a stockpile of a new "ceramic" age of products. Stay tuned for a bunch of videos to see if the new ceramic consumer buzz is worth the hype.
If you guys are interested in trying these out, check the links below from Amazon, a portion of any purchases goes directly to the channel to fund additional testing!
Big thanks to Turtle Wax for reaching out and inviting me to meet with them and get an early hands on experience of the new line with a great group of other detailers and reviewers here on YouTube! I had an absolute blast, and hope that we get another opportunity to meet up as a group and share ideas and get to know each other better. Be sure to check out and subscribe to the other awesome content creators at their channels below:
Disclaimer: Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!
#hybridsolutions #turtlewax #ceramicspray #autodetailingHow Effective are Wax & Grease Removers on Fresh Wax? Lets Test!WaxMode2019-12-05 | In this video, I'm covering four different wax and grease removers to see how effective they are at attempting to remove a fresh carnauba wax from the paint. Using Zymol Ital as my base wax, I focus on Klean Strip Prep-All, Dupli-Color Grease & Wax Remover, Rustoleum Wax & Tar Remover, and Poorboy's World Strip Down.
Zymol - I recommend trying Creame or Carbon out first, there's little difference in performance (and scent unfortunately) as you move up in pricing with Titanium, Glasur, and Ital in my experience. Zymol Creame: amzn.to/2OR79mR Zymol Carbon: amzn.to/36euViP
Zymol Ital was applied to the paint 3 days prior to the first rinse. The paint was prepped using 3D One, Meguiar's D302, followed up with Klean Strip Prep-All. Overall, Dupli-Color's performance is negligible on the fresh Ital. Rustoleum is more effective at knocking down the wax, however the wipeability is terrible, feels like a significant residue is left behind. Prep-All's effectiveness is more tied to its ability to penetrate the surface prior to flashing off. At higher surface temps, it can flash off too quickly before it can lift the wax off and be removed with the towel. However, it can still be effective at knocking down a wide variety of products even if it flashes quickly, and its wipeability is perfect. This is my recommended panel wipe for its performance and price. It also doubles as a perfect post polish panel wipe for removing polishing oils left behind by the abrasive compounds and polishes, giving us the best value of the bunch.
Poorboy's World Strip Down is an effective product in the short term. However it's priced a bit out of my budget for how quickly I go through the bottle. Also, this requires the wash process to utilize it effectively, and it's questionable on how cleanly it can be rinsed off the surface. I would still want to follow up with a panel wipe after using it on the paint.
Disclaimers: Use PPE when working with these products! Protect your eyes, hands, and lungs. Also, always test products out on a small section of the paint, preferably an inconspicuous area, in order to make sure a negative reaction isn't observed by that specific panel wipe or wax remover. Test at your own risk.
Note: The Amazon links above are affiliate links, purchasing from these helps support the channel!Paint Coatings - What happens if you wash them before they cure? Lets test!WaxMode2019-11-23 | This is a test demonstration for what happens when you wet or wash your paint coating before it has properly cured on your paint. In this video I'm working with CarPro CQuartz UK on the left half of the hood, and McKee's 37 SiO2 Enhanced Paint Coating on the right half.
CQUK and M37 were applied 15 minutes prior to the first rinse test. Then washed 5 minutes afterwards with Meguiar's Hyper-Wash and rinsed. The panel was dried and later rinsed after waiting 24 hours. The panel was then dried and sat for an additional 24 hours (48 total) and rinsed.
Overall, you can see CQUK is more affected by the wash with Hyper-Wash compared to M37. CarPro recommends a 24 hour dry cure avoiding moisture and water. Followed up with a 5 day cure for avoiding detergents and chemicals. M37 recommends a standard 24 hour cure. An early wash and rinse does not fully prohibit the coatings' further ability to continue to cure. However, with CQUK there's more evidence that the early wash and rinse permanently reduced its maximum hydrophobic performance. M37's hydrophobics seemed less impacted by the test.
CarPro recommends an application of their Reload spray sealant can be applied 30-60 minutes after the initial application of CQuartz in order to assist in sealing the coating, and act as a barrier against damaging water spotting if moisture or water should be introduced earlier than the 24 hour recommended dry cure.
On top of this initial curing period, the actual coating can continue to cure and may not achieve maximum hardness until well after 5 days, depending on the type of coating you're working with. However it would be difficult to test for this, as the maximum hydrophobics are achieved relatively quickly within that 1-5 day period.
Disclaimer: Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!WaxMode Live StreamWaxMode2019-11-14 | ...CarPro CQuartz Lite - One of the Best Value Coatings? 3 Month Update and Chemical Resistance Test!WaxMode2019-11-01 | In this video I put CarPro's new CQuartz Lite coating to the test, showcasing a 3 month durability update and chemical resistance test against Super Clean's aerosol degreaser. With an advertised durability of 6+ months and 5oz (150ml) size for only $45, CQuartz Lite could be the BEST value based coating on the market right now.
Time Stamps: 0:35 - 3 month durability test rinse (pre-wash) 0:56 - Post-wash rinse (Reset) 3:40 - DPC Shield vs. CQuartz Lite intro 4:24 - First rinse after 1 full week of curing 5:43 - First wash with CarPro Reset 6:58 - Intro to the chemical resistance test with Super Clean aerosol 8:03 - Super Clean application and wipe in 8:53 - First rinse after test 9:58 - Post wash with Reset and towel dry - final rinse
Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!
#carpro #cquartz #ceramiccoating #hydrophobic #autodetailingAdam’s Ceramic Spray Coating & IGL Premier - 4.5 Month Durability TestWaxMode2019-09-28 | This video is a 4.5 month (19 weeks) durability update for Adam's Ceramic Spray Coating, and IGL Ecocoat Premier. The paint was prepped using 3D One, Sonax Perfect Finish, and Klean Strip Prep-All. One application of each product was used for the test, Adam's Spray Coating on the left half of the door, IGL Premier on the right half. The test car is a daily driver, ungaraged, in central Florida environment. The paint was washed using only CarPro Reset soap throughout the entire duration of the test.
I've enjoyed working with both products in the short term. Very easy to apply and work into the paint, the immediate hydrophobics are great, especially for IGL Premier. Overall, Adam's began to pull away in performance compared to IGL at 6 weeks, but I'm certainly not done testing with IGL, I may work with another section on the paint and run a multiple application test with it in order to retest durability, I've seen impressive durability tests with IGL Premier at beyond 5 months, better results than what I achieved in my test.
Adam's has since updated the formula for this spray coating, the new formula is claimed to be more durable. Stay tuned for more test videos!TopCoat F11 - 7 Coats Performance Test & 2 Weeks Durability Update (1 Coat)WaxMode2019-08-17 | Closing out my testing of TopCoat F11, seven individual coats have been applied to the test hood for this video, all coats applied 24 hours after one another on fully prepped and polished paint. Using Turtle Wax Ice Spray Wax on the right half of the hood to highlight the pricing barrier.
The paint was prepped using 3D One Hybrid Compound & Polish, followed up with Meguiar's M210 Ultra Pro Finishing Polish, followed up with a panel wipe of Klean Strip Prep-All to remove all traces of polishing oils. Each half was covered prior to spraying the opposite product to ensure cross contamination was not occurring. After 24 hours of the first coat, an additional 6 coats were applied to the paint, each coat applied 24 hours after the previous coat, the panel was then allowed to sit for one week inside of the garage before this rinse test.
The follow up clip is a 2 week durability update for 1 coat of F11 applied to the entire hood of the Honda, prepped with Meguiar's M210 and Prep-All.
My previous video for TopCoat F11 highlighted my first test with two individual coats of F11 after three weeks, I've seen poor showing of longevity with all of my individual durability tests with F11: youtu.be/KibBV4b64zw
Overall, $60 for 18oz and a few microfibers is entirely too expensive for this product.
Note: All products I test have been purchased by myself for individual testing.
#topcoat #f11 #autodetailing #turtlewaxPolish Angel Cosmic Spritz & High Gloss - WaxMode ReviewWaxMode2019-08-07 | This is an overview of Polish Angel Cosmic Spritz and High Gloss spray sealants. At $70 for 200ml each, these are some of the most expensive spray sealants in the enthusiast market. However, the ease of use, performance, and usability combine together to make them some of my favorite products I've used in my arsenal. After owning and testing so many different products, I find myself reaching for these two spray sealants the most. This can be applied to all exterior surfaces, it works on paint, glass, chrome, and trim without issues. They can be used as a standalone paint protectant, or on top of a wide variety of different coatings as toppers. Expected durability is 3-6 months.
Both Cosmic Spritz and High Gloss are very similar in feel and features, however Cosmic Spritz contains a higher concentration of silica (sio2) with a focus on durability, and High Gloss contains a higher concentration of titania (tio2), with a focus on gloss and depth. Application is the same for both products, spray directly on the surface and wipe in with a microfiber towel, or you can also use an applicator to apply to the paint and wiped off with a microfiber. 24 hours is the recommended cure period prior to the paint getting wet, and they recommend 1 hour cure before adding an additional layer or application. Make sure you shake really well prior to use.
#polishangel #highgloss #autodetailing #CosmicSpritzMothers CMX vs. Turtle Wax ICE Seal N ShineWaxMode2019-08-06 | This is a product showcase of Mothers CMX Ceramic Spray Coating and Turtle Wax ICE Seal N Shine spray sealant. Both products released for the 2019 season, I share my initial thoughts while showcasing the water behavior of each product, and then put both of them head to head in the chemical resistance test against Super Clean Aerosol Degreaser.
Overall, CMX showcases an incredibly hydrophobic short term performance, whereas Seal N Shine highlights a much more oleophobic nature in its tendency to really want to repel the soap quickly from the paint, as well as resist heavy cleaners and degreasers. Both products are easy to apply to the paint, however Seal N Shine is a bit heavier which requires more of a heavier wipedown to prevent streaking. I recommend applying both products out of the sun. Seal N Shine has proven itself in the 5 month durability test, I will be posting a durability update for CMX shortly, but based on my testing both Meguiar's Hybrid Ceramic Wax and Seal N Shine will outlast it in a pure durability test without toppers. Let me know your thoughts and experiences with each products in the comments below!
Mothers CMX ($19 for 24oz): amzn.to/2GR9QQX Turtle Wax Seal N Shine ($15 with microfiber for 16oz): amzn.to/2KicUHW Note: Amazon is out of stock on Seal N Shine without the overpriced microfiber towel, my local Walmart has SNS in stock for $6.97 a bottle.
Check out some of my other videos for more testing with Seal N Shine below: Seal N Shine vs. DPC Armor - Chemical Resistance: youtu.be/AnnlrxCWqhA Meguiar's HCW vs. Seal N Shine - 5 Month Durability Video: youtu.be/27ATvVZ9Xxk Intro to Gloss Measuring with Seal N Shine: youtu.be/N1-RtlpIAzU
Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!
#motherscmx #turtlewax #sealnshine #superclean #autodetailingGtechniq EXOv4 & CarPro Gliss v2 - 2 Month Durability UpdateWaxMode2019-08-06 | This is a 2 month durability update for Gtechniq EXOv4 and CarPro Gliss v2.
The paint was prepped using Sonax Perfect Finish, followed up with Klean Strip Prep-All, the car is daily driven and not garaged. EXO and Gliss are coating level products, delivering 6 months to 2 years of standalone durability, but can also be used as top coat products for their respective line of coatings, like Crystal Serum Light, C1 Crystal Lacquer, and CQuartz UK.
Overall, excellent initial short term performance at 2 months, greatly exceeding visible performance of most waxes and sealants without being topped. EXOv3 was an excellent coating, easily delivering 1+ years of durability on the side of the test car, this will be a test to see how well v4 will hold up. EXO is heavier than Gliss, will require a little more effort to remove after application, but also leaves a slightly darker finish with decent slickness.
The original formula of Gliss gave me many headaches when trying to figure out the best application process to deliver consistent performance, but CarPro greatly improved the application of v2 to yield incredible and consistent results, while leaving behind a slick surface. Ease of application is amazing, if this holds up 6+ months as a standalone, it could be a fantastic beginner coating grade product to recommend.
Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!Intro to Gloss Measuring - Turtle Wax ICE Seal N Shine vs. Black PolishWaxMode2019-06-29 | This is a comprehensive introduction to gloss measurement testing in the detailing environment, using Turtle Wax's new ICE Seal N Shine and ICE Black Polish paint protectants. I'm going to cover a wide variety of topics, including the variables that determine measurement accuracy and consistency, the weakness of the Gloss Unit as a solo determinant of paint appearance, and showcase the gloss measurements for each stage of both pre and post-application time periods.
Gloss testing in detailing is more than just spitting out numbers from a gloss meter, you need to understand the basics for why the meter is turning out the numbers that it does, and understand the changes in gloss from one test phase to another. As well as identify the reasons for the differences in gloss measurements between different types of products.
Turtle Wax ICE Black Polish and Seal N Shine are two different paint protectants that easily highlight the differences for post-application gloss measurement results. Overall, the post-application gloss measurement result does not paint the full picture of the gloss potential of an individual product.
The gloss meter used for this test was the 2007 Rhopoint Novo-Gloss Trio, measured at the 60 degree angle, using a calibration tile of 93.7GU. This video is not sponsored, all products were purchased individually for personal product testing.
Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!
#rhopoint #glossmeter #turtlewax #sealnshineMeguiars Hybrid Ceramic Wax & Turtle Wax Ice Seal N Shine - 5 Month Durability TestWaxMode2019-06-16 | This is a 5 month durability test for Meguiar's Hybrid Ceramic Wax and Turtle Wax Ice Seal N Shine, two of the most popular new spray sealants to recently enter the consumer detailing market.
The paint was clayed and prepped using 3D One, followed up with Sonax Perfect Finish and Prep-All. This is the third time the paint has been washed, using CarPro Reset as my designated wash soap. One application/coat of the spray sealants were applied to the paint during this time, no toppers or spray detailers have been used at any point during this test. This car is daily driven, and not garaged at all.
Overall, great performance at the 5 month mark, there are signs of the products deteriorating on the upper areas of the paint, but also signs of great lasting performance in large sections in the middle areas.
Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!
#hybridceramicwax #sealnshine #meguiars #turtlewax #autodetailingP&S Bead Maker - WaxMode ReviewWaxMode2019-05-14 | In this video I test out P&S Bead Maker, this is a very popular spray sealant in the market currently that has really performed as an excellent coating topper for me. I put this up against Chemical Guys V7 in the short term water behavior test, and showcase some topping performances on top of CarPro CQUK 3.0 and Classic CQuartz. At the end, I run a test of how Bead Maker impacts the performance of Zymol Glasur when used as a topper. Overall, one of the slickest spray products on the market, very easy on/off application, cure time of 8 hours recommended but not necessarily needed, great smell, excellent gloss, coating friendly, low price, it's worth checking out at the price.
Few things to clarify: In the coatings test I first topped Classic CQuartz at 6 months, no other previous toppers were used. I first topped the right half of CQUK 3.0 after about 9 months on the paint. Turtle Wax Ice Seal N Shine was applied to the left half of the front drivers door after 1 year of durability for CQUK 3.0, no other toppers used on this side.
Timestamps: 1:20 - First rinse with Chemical Guys V7 (left), Bead Maker (right) 3:00 - First wash with CarPro Reset 4:50 - CQUK 3.0 - 1 week after applying 5:27 - Classic CQuartz - 1 week after applying 6:32 - CQUK 3.0 - Left half of front door is bare CQUK, right half is Bead Maker on top - 9 months after applying the coating 6:52 - Classic CQuartz - entire rear door has had Bead Maker first applied 3 months prior to this rinse 7:17 - CQUK 3.0 after 1 year - Ice Seal N Shine applied 1 week ago on left half, CQUK + Bead Maker on the right half 7:35 - Classic CQuartz after 1 year + Bead Maker 8:42 - Left half is Bead Maker solo, center right is Zymol Glasur + Bead Maker, far right is Glasur solo
Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!
#beadmaker #chemicalguys #spraysealant #cquartz #autodetailingICE Seal N Shine vs. DPC Armor - Super Clean Durability TestWaxMode2019-05-02 | This is a chemical durability showcase for DPC Armor against Turtle Wax's new ICE Seal N Shine spray sealant using Super Clean Aerosol Degreaser. The second half of the video showcases the performance of DPC Armor against a polished and unprotected control section in an attempt to isolate any potential chemical resistant it has against Super Clean.
Long video, please utilize the time stamps below to jump between results.
Time stamps: 0:53: First rinse (48 hour cure) - DPC Armor (Left), Seal N Shine (Right) 1:53: First wash with CarPro Reset 2:30: Sean N Shine resisting Reset's surfactants 3:09: Rinse after Reset wash 4:47: Super Clean sprayed onto test sections 5:20: Seal N Shine resisting Super Clean 6:10: First rinse off after wiping in Super Clean 7:55: Reset rinsed off after applying Super Clean 9:39: First rinse after towel drying paint
10:20: Intro to follow up test - DPC Armor vs. unprotected control section 10:48: First rinse 12:35: Rinse after CarPro Reset wash 13:52: Super Clean applied to both sections 15:16: First rinse after working in Super Clean 17:02: Rinse after follow up Reset wash 19:35: Rinse after towel drying paint
Any questions or comments, please don't hesitate to reach out or post below!
#dallaspaintcorrection #dpcarmor #sealnshine #turtlewaxDPC Armor - Meguiars Hybrid Ceramic WaxWaxMode2019-03-11 | DPC Armor - Shine & Protect SiO2 Spray vs. Meguiar's Hybrid Ceramic Wax. This is a short term water behavior test comparing the popular new spray sealants in the detailing market. DPC Armor (right half - full strength), Meguiar's HCW (left half). Paint was polished with Meguiar's M210 Finishing Polish, followed up with Klean Strip Prep-All panel wipe. 1 hour wait period before rinsing in the first clip, followed up with Meguiar's Hyper-Wash soap down and rinse. Additional clip includes DPC Reflect (left half) vs. DPC Armor (right half) after 5 day waiting period (both full strength), followed up with soap down and rinse with Meguiar's Hyper-Wash.
Let me know what you guys think, feel free to share any requests for additional comparisons. No product affiliation, all products are purchased for personal testing.
#dpc #dpcarmor #meguiars #hybridceramicwaxAdam’s Ceramic Spray Coating - First Impressions & HydrophobicsWaxMode2019-01-27 | Adam's has released their new Ceramic Spray Coating, in this video I share my first impressions and pair it up against Gyeon Can Coat in the hydrophobic rinse test!
Both Gyeon Can Coat (left half of panel) and Adam's Ceramic Spray Coating (right half of panel) have been applied on top of polished and prepped paint (Meguiar's D302 followed with Prep-All), and allowed a full 1 week cure period prior to this first rinse. Overall the Adam's is very user friendly, with faster application speeds compared to standard coatings and it provides a slicker surface compared to Can Coat. Advertised durability is 6-8 months, recommended cure period prior to exposure is 4 hours. Apply with a microfiber towel and allow 1-2 minutes for the coating to flash before buffing clean with a separate microfiber towel. Application video to come!
Stay tuned for durability results as a base coating, as well as topping tests both on top of Ceramic Spray Coating and used as a topper itself on more durable base coatings like CQUK 3.0. I'm not going to run down 9H claims, pencil hardness is not a significant factor in determining coating performance in the detailing market.
Note: This is NOT a sponsored video, all products shown have been purchased in full for personal testing.
Adam's Product Links: Adam's Ceramic Spray Coating ($39.99 - 8oz): http://bit.ly/2UkWsc3 Adam's Ceramic Spray Coating ($69.99 - 16oz): http://bit.ly/2Wm97xl (Use SHINE15 for an additional 15% off current coupon!)
Gyeon Can Coat: amzn.to/2B6CjiZ Gilmour 3810 Watering Rear Trigger Spray Nozzle: amzn.to/2TiUI36 Pressure Washer: Ryobi 1700 1.2GPM Electric with Obsessed Garage MTM SGS-28 Swivel Wash Package: http://bit.ly/2FS3DFs
Disclaimer: Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!