Uploaded June 2019 | Updated November 2026, 16 hours ago
I've synchronized the motion of 5 balls across 7 videos playing at the same time across 7 devices. Thanks for watching! Subscribe for more chaotic doodles.
Where do I even begin. I always expect complications to arise in my videos, but this one had a lot of hoops to jump through. There were many chains of a problem arising, I create a solution, that solution creates a new problem, etc.
After I finished creating and editing the 7 videos that play simultaneously together, my plan was to just click play on all of them at the same time and shoot the video. I only had 1 phone, and It's too hard to coordinate borrowing 3 phones from people in the middle of the day for long periods of time. Thankfully, my parents and sister let me borrow theirs while they slept one time. I never went to bed that night. By 7am the next morning, I felt dead and utterly defeated. There were so many inconsistencies in the timing that I never got a good take. After vowing to never pull an all nighter again, I bought 3 Android phones so I wouldn’t have to borrow from anyone.
Big issue, SYNCHRONIZATION / TIMING seven youtube videos to play at the same time. Sometimes one of the videos would buffer and set it behind, or there would be a difference in the time from click to playback between different devices. One of my solutions was to download the videos so there was no network inconsistencies. This created new problems because of auto-tilt settings on Android. Another solution I attempted was to attach 5 styluses to a yardstick so I could click play all at the same time instead of trying to use my hands (hard to hit all perfectly by hand). This idea failed as well because the material in the styluses sucked and weren’t consistent in clicking on the phones. Finally, I went back and edited the videos to have a staggered intro. This way I was able to memorize the latency in each individual device and correct for it manually. You know how for the countdown in Mario Kart you hit the gas on 2? It’s similar to that. The right screen started 1 second in because the laptop was old and laggy, the tablet had to be clicked on “1”, and the rest were fairly responsive.
I've made the videos public on a second channel if anyone has access to enough screens and would like to try the challenge: youtube.com/channel/UCHFXcc5gyoZZnyz_1UwZXmg
Music: Slip - Geographer
patreon.com/doodlechaos
twitter.com/doodlechaos
contact@doodlechaos.com
I've synchronized the motion of 5 balls across 7 videos playing at the same time across 7 devices. Thanks for watching! Subscribe for more chaotic doodles.
Where do I even begin. I always expect complications to arise in my videos, but this one had a lot of hoops to jump through. There were many chains of a problem arising, I create a solution, that solution creates a new problem, etc.
After I finished creating and editing the 7 videos that play simultaneously together, my plan was to just click play on all of them at the same time and shoot the video. I only had 1 phone, and It's too hard to coordinate borrowing 3 phones from people in the middle of the day for long periods of time. Thankfully, my parents and sister let me borrow theirs while they slept one time. I never went to bed that night. By 7am the next morning, I felt dead and utterly defeated. There were so many inconsistencies in the timing that I never got a good take. After vowing to never pull an all nighter again, I bought 3 Android phones so I wouldn’t have to borrow from anyone.
Big issue, SYNCHRONIZATION / TIMING seven youtube videos to play at the same time. Sometimes one of the videos would buffer and set it behind, or there would be a difference in the time from click to playback between different devices. One of my solutions was to download the videos so there was no network inconsistencies. This created new problems because of auto-tilt settings on Android. Another solution I attempted was to attach 5 styluses to a yardstick so I could click play all at the same time instead of trying to use my hands (hard to hit all perfectly by hand). This idea failed as well because the material in the styluses sucked and weren’t consistent in clicking on the phones. Finally, I went back and edited the videos to have a staggered intro. This way I was able to memorize the latency in each individual device and correct for it manually. You know how for the countdown in Mario Kart you hit the gas on 2? It’s similar to that. The right screen started 1 second in because the laptop was old and laggy, the tablet had to be clicked on “1”, and the rest were fairly responsive.
I've made the videos public on a second channel if anyone has access to enough screens and would like to try the challenge: youtube.com/channel/UCHFXcc5gyoZZnyz_1UwZXmg
Music: Slip - Geographer
patreon.com/doodlechaos
twitter.com/doodlechaos
contact@doodlechaos.com





![Chaos League LIVE (Type in Chat to Spawn) V2.2 Alpha Test #5
Want quick points? Share the stream with friends and ask them to type in @yourusername. You’ll both earn 500 points for inviting a new player. (The red dot on a ball means available to recruit) Players with accounts less than 1 week old are blocked from this mechanic to avoid abuse.
!toll [amount 0-10] // Only available as king. Allows you to set a point fee that will charge each player who goes through a pipe on the right tile.
!defend [amount] //spread defense divided up among 10 obsidian defense bricks
!payitforward //If youre not king, double your points, destroy your marble, and give your points to anther random player
!duel @username1 @username2 //Only available if you the king. ****Each player has a limited time to creatively ask for votes, all players can !vote, winner gets 50 points per vote, loser dies
!vote left|right //If there is a duel, you can vote for who you want to live
!givepoints [amount] @username //Give a specified amount of your points to another player. Available between any two players alive on the field.
INSTRUCTIONS:
Simply enter !# to spawn and choose the pipe number for your ball. You will see the ring color change around your ball after you make your selection. You can expect between 1 - 8 seconds of delay before youll see your interaction take place.
I have tested this game a lot, but there still may be bugs. If there is a crash, or I need to fix something, I will get the stream back as soon as possible. Please message on discord if you have
any questions!
Discord: https://discord.com/invite/7FCrWAzDY7
Marble Upgrades: https://www.patreon.com/doodlechaos
Q&A
Why do the default brick values different for new kings sometimes?
- The strength of the bricks are determined by the total duration the previous king held the throne. If it is shorter than the target duration, the next king block values will go up one power of 2. If the previous king held for longer than the target duration, the next block value will be decreased by a power of 2.
I’m typing in numbers for a pipe, why am I not spawning in?
- If you type the same thing into chat repeatedly too much, youtube will detect your messages as spam and begin filtering them. Many players have found adding random characters after your number solves this issue.
ChangeLog Chaos League Live V2.2
- Fixed x200 bug at the bottom of legendary tile Hole In One
+ Taking the throne now auto spends half of your points on defense (economy balancing)
+ Pipes now cycle between more distinct colors, to avoid confusion with which pipe a player is targeting based on their color ring
- Fixed leaderboard bug causing it to freeze
+ Duels now remove half the points of the loser, and 50 times #votes for the winner (or to both for tie)
- Fixed Rise and Grind being incorrectly blacklisted
- Your marble wont pop up an empty speech bubble after doing a supersticker anymore
- Fixed bug causing duel to break after a player uses !payitforward while dueling
+ Added ability to select and activate supers via UI menu for testing
+ Lava now removes half of your points
Im on a mission to indie dev the best interactive livestream game of all time. Let me know what you think!
Music Sources:
https://www.youtube.com/@Wintergatanhttps://wintergatan.net/
Monstercat:
https://www.youtube.com/@Monstercat
By participating in the interactive YouTube Livestream and sending Supers, you acknowledge that Superchats/Superstickers are voluntary contributions and do not guarantee any specific action or response from the content creator. Chaos League LIVE (Type in Chat to Spawn) V2.2 Alpha Test #5](https://i.ytimg.com/vi/T3rGYWzlyHM/mqdefault.jpg)



![Marbles vs Music - Visualizer Bars Battle Royale
Chaos League is my marble race series that spawns YOU in. Create your character with custom images, colors, victory messages and more. Climb the leaderboards and see how you rank among the competition. How do I join for free? It’s simple, just become a valid patron at http://patreon.com/doodlechaos and you will be spawned in to the next Chaos League video automatically! You can join for FREE with Patreon’s new “Free Trial” feature! I’ve maxed out the duration. The higher tier you pick, the easier it will be to spot your character in the crowd. (PSA: If you cancel before the video comes out, I wont be able to draw your information from the API and you wont spawn in. Custom pledges below Doodler tier will not spawn in.)
Welcome to episode 3 of Chaos League. I built my own physics based music visualizer just to make this video. Its mostly procedural along a line renderer, which is how I was able to curve the visualizer bars into different paths. Super fun to build, but boy did it turn out to be way more challenging than I was expecting. Ive been learning a lot while working on this.
Season 1 Uploads
Chaos League Ep 1 - https://www.youtube.com/watch?v=YVjXf1zRI3I&t=2s
Chaos League Ep 2 - https://www.youtube.com/watch?v=NRqzqg7vDuw&t=2s
How do I customize my marble?
Your marble will be spawned in with your current Patreon profile picture image. Display names are taken from your Patreon name as well. You can update these at any time on Patreon. Other customization options (such as victory message and name color) must be modified by logging in with your Patreon account at doodlechaos.com. Don’t forget to add a victory message to display on the top ten leaderboard!
Have other questions? Ask in the Chaos League Discord Text Channel.
https://discord.gg/VZPKr8VvRE
Twitter:
https://twitter.com/DoodleChaos
Music:
[Electro] Nitro Fun - Cheat Codes [Monstercat Release]
https://www.youtube.com/watch?v=mdaCDsN1FJ0
Lego Click SFX by CGEffex:
https://freesound.org/people/CGEffex/sounds/104818/
My main takeaways from this project (Mostly me rambling just to clear my head)
1. Unity Package Manager is amazing! Learn to make your own packages and you will become 10x more organized. It is so cool that I can make a change to my visualizer spectrum package, and then update it into all other unity projects with ease. No more duplicate instances of code across projects.
2. Animation does not play well with kinematic rigidbodies. Challenge: Make super fast moving bars animated to music interact naturally with rigidbody physics, and exert the proper force on the balls based on their change in growth velocity on the bar from the music. Making the bars grow while also maintaining the correct velocity was a tough challenge. My solution was to create caps for each of the bars that are a constant scale, then scale a secondary base mesh underneath it. Now how should I move these caps? First failure, PID controlled caps, it looked correct, but the balls kept glitching through the bar colliders. Second failure, making custom config joint sliders for each of the caps so that they are locked into a certain range of motion. This also had crazy bugs in the physics. Sometimes the balls would stick to the top even as the bars were moving down against gravity. My theory for why this method was failing the penetration resolution tried to push the bar away to resolve the collision, rather than the ball, but the rigidbody world somehow wasnt aware that I had a constraint due to the config joint? IDK. Constraints + Rigidbodies in unity have been buggy in my experience, but Im probably doing something wrong. Finally, the working solution turned out to be the simplest. All I had to do was make the rigidbodies kinematic and animate them with Rigidbody.MovePosition(). This updates the velocity correctly and viola, no more glitches!
Fun facts:
- I pulled an all nighter just to get the physics correct when the marbles impact the music visualizer bars.
- I added support for emojis in the victory message on the leaderboard! Marbles vs Music - Visualizer Bars Battle Royale](https://i.ytimg.com/vi/U6ywtNVQYqQ/mqdefault.jpg)
