Uploaded April 2025 | Updated November 2026, 3 hours ago
The threads on this float chamber were a little stiff so I ran a tap into the nut and a die along the stud in the float chamber body. This was just to clean the threads.
Turns out that the threads are 1/4" British Standard Fine (BSF)
youtube.com/playlist?list=PLyZx5cEqXdqXTkgvN0yDFdcRptPNkCmV-
The threads on this float chamber were a little stiff so I ran a tap into the nut and a die along the stud in the float chamber body. This was just to clean the threads.
Turns out that the threads are 1/4" British Standard Fine (BSF)
youtube.com/playlist?list=PLyZx5cEqXdqXTkgvN0yDFdcRptPNkCmV-










