Joe Pie | Stuart D10 - # 8 -- Machining the Cylinders - Part 2 @joepie221 | Uploaded May 2023 | Updated October 2024, 5 hours ago.
This video shows the approach for machining the end ports and oblique holes on the cylinders, using a tooling ball. 28 threaded holes, 6 ports, 2 precision bores, 4 scallops and 4 oblique holes. Bonus material at the end.
Take a Look !!
Patreon Support: patreon.com/joepie
Website: advancedinnovationsllc.com
Web Store: advancedinnovationsllc.com/shop
Amazon Affiliate Links: NOTE, as an amazon affiliate I do earn a small royalty from sales linked here.
Blue Magic metal polish: amzn.to/3ENEj0T
B&L Eye Loupe: amzn.to/3TU89Vw
Indicol 178: amzn.to/3NycM4s
Generic: amzn.to/3QZ6xK3
Postage Scale: amzn.to/3oCxeY0
This video shows the approach for machining the end ports and oblique holes on the cylinders, using a tooling ball. 28 threaded holes, 6 ports, 2 precision bores, 4 scallops and 4 oblique holes. Bonus material at the end.
Take a Look !!
Patreon Support: patreon.com/joepie
Website: advancedinnovationsllc.com
Web Store: advancedinnovationsllc.com/shop
Amazon Affiliate Links: NOTE, as an amazon affiliate I do earn a small royalty from sales linked here.
Blue Magic metal polish: amzn.to/3ENEj0T
B&L Eye Loupe: amzn.to/3TU89Vw
Indicol 178: amzn.to/3NycM4s
Generic: amzn.to/3QZ6xK3
Postage Scale: amzn.to/3oCxeY0