Woodpeckers | Strengthen your miter joints with Woodpeckers Spline Jig! #shorts #woodpeckerstools @WoodpeckersLLC | Uploaded June 2024 | Updated October 2024, 2 hours ago.
Strengthen your miter joints with Woodpeckers Spline Jig.

A normal mitered corner lacks the long-grain to long-grain contact needed for a strong joint. Since it isn’t completely end-grain to end-grain, it will usually hold together for a while, but it’s weak and probably won’t survive seasonal changes. You can make the joint rock solid and add a design element at the same time by adding splines across the miters. Woodpeckers Spline Jig makes it simple to add splines to all kinds of mitered joints using either your table saw or router table. Just set the stops to position the cut where you want to add a spline, drop your pre-glued miter project in the jig and make the cut. Glue in the spline and just that quickly, you’ve made an attractive joint that will last for generations.

Also used in this video was the Rip-Flip! This fence stop system brings micro-adjustability to your table saw rip fence. This stop makes it even more convenient to dial in the position of your spline exactly where you want it!

To learn more about either the Rip-Flip or the Spline Jig, visit our website at woodpeck.com or copy and paste the links below in your web browser!

Spline Jig:
woodpeck.com/spline-jig.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=SPLINE-JAY-06-2024

Rip-Flip:
woodpeck.com/rip-flip-fence.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=RIPFLIP-JAY-06-2024

Tools Used:
1️⃣ Spline Jig
SKU: SPLINE-23

2️⃣ Rip-Flip Fence Stop System (36” sawstop)
SKU: RF-FS-32-SS