Uploaded November 2026 | Updated November 2026, 2 days ago
Should the club go straight back or to the inside? Todd Graves explains "in then up," the phrase Moe Norman used with him to describe the backswing, and why it's the simplest way to get the club on plane.
Here's the short answer. Moe set up in a position that mirrors impact, so the only difference between his address and his impact is rotation. At address the shaft points to the lead side of the body, which is where it will point at impact. Keep that relationship and turn, and the club has to move inward for a while. That's the "in." Take the club straight back and you lose the relationship. From there the hands hinge (radial deviation), and that's the "up." Blend the two and the club arrives exactly on plane, ready to come down. Todd says that, when he measured it, the inward turn makes up about two-thirds of the backswing, so if you slide, let your head move or don't rotate enough, the club can't get on plane with good leverage. It's also what swing plane really means: every position in Moe's swing keeps an impact relationship, from the takeaway to the finish, so every position makes impact easier.
In this lesson, Todd covers:
• What Moe Norman meant by "in then up"
• How the arc on the Alignment & Ball Position Trainer shows where "in" ends and "up" begins
• Why Moe's setup mirrors impact
• Why the club points to the lead side at address and impact
• Why turning moves the club inside, and why straight back loses the relationship
• Radial deviation and hand hinge: what makes the club go up
• Why the inward turn is most of the backswing
• What happens when you slide or your head moves
• What swing plane really is: the impact relationship everywhere in the swing
⏱️ CHAPTERS
00:00 Does the club go straight back or to the inside?
00:13 What did Moe Norman mean by "in then up"?
00:30 How does the trainer's arc show the backswing?
00:57 Why does Moe's setup mirror impact?
01:40 Why does the club go inside on the backswing?
02:27 What makes the club go up? Radial deviation and hand hinge
02:54 How far in, and when do you start going up?
03:21 Why is the inward turn two-thirds of the backswing?
03:49 What happens if you slide or your head moves?
04:17 How do you use the arc on the trainer?
05:04 What is swing plane? The impact relationship
05:45 Why is the Single Plane Swing the simplest way to swing?
📘 Todd's book, The Intelligent Golf Swing: theintelligentgolfswing.com
🎯 The Alignment & Ball Position Trainer Todd uses in this video: shop.singleplanegolf.com/products/alignment-ball-position-trainer
🆓 Free P.L.A.N.E. Guide + 5 video lessons: theintelligentgolfer.com/plane
🗓️ Single Plane 30, Todd's 30-day class, starts the first Monday of every month: theintelligentgolfer.com/singleplane30b
🏌️ Single Plane Academy: singleplaneacademy.com
🌐 Graves Golf: gravesgolf.com
📺 Subscribe: youtube.com/@ToddGravesGolf
#SinglePlaneSwing #MoeNorman #ToddGraves #GravesGolf #GolfTips
Should the club go straight back or to the inside? Todd Graves explains "in then up," the phrase Moe Norman used with him to describe the backswing, and why it's the simplest way to get the club on plane.
Here's the short answer. Moe set up in a position that mirrors impact, so the only difference between his address and his impact is rotation. At address the shaft points to the lead side of the body, which is where it will point at impact. Keep that relationship and turn, and the club has to move inward for a while. That's the "in." Take the club straight back and you lose the relationship. From there the hands hinge (radial deviation), and that's the "up." Blend the two and the club arrives exactly on plane, ready to come down. Todd says that, when he measured it, the inward turn makes up about two-thirds of the backswing, so if you slide, let your head move or don't rotate enough, the club can't get on plane with good leverage. It's also what swing plane really means: every position in Moe's swing keeps an impact relationship, from the takeaway to the finish, so every position makes impact easier.
In this lesson, Todd covers:
• What Moe Norman meant by "in then up"
• How the arc on the Alignment & Ball Position Trainer shows where "in" ends and "up" begins
• Why Moe's setup mirrors impact
• Why the club points to the lead side at address and impact
• Why turning moves the club inside, and why straight back loses the relationship
• Radial deviation and hand hinge: what makes the club go up
• Why the inward turn is most of the backswing
• What happens when you slide or your head moves
• What swing plane really is: the impact relationship everywhere in the swing
⏱️ CHAPTERS
00:00 Does the club go straight back or to the inside?
00:13 What did Moe Norman mean by "in then up"?
00:30 How does the trainer's arc show the backswing?
00:57 Why does Moe's setup mirror impact?
01:40 Why does the club go inside on the backswing?
02:27 What makes the club go up? Radial deviation and hand hinge
02:54 How far in, and when do you start going up?
03:21 Why is the inward turn two-thirds of the backswing?
03:49 What happens if you slide or your head moves?
04:17 How do you use the arc on the trainer?
05:04 What is swing plane? The impact relationship
05:45 Why is the Single Plane Swing the simplest way to swing?
📘 Todd's book, The Intelligent Golf Swing: theintelligentgolfswing.com
🎯 The Alignment & Ball Position Trainer Todd uses in this video: shop.singleplanegolf.com/products/alignment-ball-position-trainer
🆓 Free P.L.A.N.E. Guide + 5 video lessons: theintelligentgolfer.com/plane
🗓️ Single Plane 30, Todd's 30-day class, starts the first Monday of every month: theintelligentgolfer.com/singleplane30b
🏌️ Single Plane Academy: singleplaneacademy.com
🌐 Graves Golf: gravesgolf.com
📺 Subscribe: youtube.com/@ToddGravesGolf
#SinglePlaneSwing #MoeNorman #ToddGraves #GravesGolf #GolfTips










