Uploaded November 2026 | Updated November 2026, 1 day ago
Stop your Switch 2 from phoning home to Nintendo while keeping CivSwitch payloads working over a local connection. I turn a Raspberry Pi Pico 2 W into a USB serial-to-Wi-Fi bridge, flash its firmware, connect to Switch2Bridge, find the Pico's COM port and send a JavaScript test payload. The Switch stays on an isolated network without internet forwarding, while my PC stays on its normal connection.
I start with community reports of launch restrictions affecting SmileBASIC and Civilization VII on firmware 23.0.1, then show the offline setup on my own console. The hello.js payload executes successfully, and the system-update check returns error 2137-8007.
This setup requires CivSwitch's Remote JS Loader to already be configured. It creates a local network without internet forwarding and answers the console's connectivity checks locally. This walkthrough demonstrates isolation and payload delivery; it does not demonstrate clearing an existing supernag or launch restriction.
CHAPTERS
00:00 Reports of Switch 2 launch restrictions
01:15 Gezine recommends an internal network
01:59 Reusing the Pico 2 W from my CivSwitch guide
02:38 ESP32 and Ethernet alternatives
02:56 How the Pico 2 W serial bridge works
04:22 Download and flash the bridge firmware
04:57 Connect Switch 2 to Switch2Bridge
05:37 Launch Civilization VII and the saved loader
06:17 Download the repo and check Python
06:57 Find the Pico's COM port in Device Manager
07:28 Install the Python requirements
07:47 Send the hello.js payload
08:31 Test the blocked system-update connection
WATCH FIRST
CivSwitch Setup Guide for Switch 2: Step by Step
youtube.com/watch?v=sxFJqAfduHU
RESOURCES
CivSwitch Pico 2 W Serial Bridge by favas0:
github.com/favas0/CivSwitch-Pico2W-SerialBridge
Original CivSwitch Serial Bridge by Jack Spence (ESP32 / Raspberry Pi):
github.com/jackspence7/CivSwitch-SerialBridge
Pico 2 W board shown (Amazon):
amazon.com/dp/B0DP54FWX1
Community report discussed:
reddit.com/r/switch2hacks/comments/1xu2zdc/comment/19skl65g2m8n8
Gezine:
https://x.com/gezine_dev
Blocking Nintendo servers guide:
https://switch.hacks.guide/extras/blocking_nintendo?tab=setting-up-a-new-connection-via-wi-fi
90DNS project:
gitlab.com/a/90dns
FOLLOW ME
Twitter: https://x.com/mbcrump_youtube
Bluesky: https://bsky.app/profile/crump-youtube.bsky.social
#Switch2 #CivSwitch #Pico2W
Stop your Switch 2 from phoning home to Nintendo while keeping CivSwitch payloads working over a local connection. I turn a Raspberry Pi Pico 2 W into a USB serial-to-Wi-Fi bridge, flash its firmware, connect to Switch2Bridge, find the Pico's COM port and send a JavaScript test payload. The Switch stays on an isolated network without internet forwarding, while my PC stays on its normal connection.
I start with community reports of launch restrictions affecting SmileBASIC and Civilization VII on firmware 23.0.1, then show the offline setup on my own console. The hello.js payload executes successfully, and the system-update check returns error 2137-8007.
This setup requires CivSwitch's Remote JS Loader to already be configured. It creates a local network without internet forwarding and answers the console's connectivity checks locally. This walkthrough demonstrates isolation and payload delivery; it does not demonstrate clearing an existing supernag or launch restriction.
CHAPTERS
00:00 Reports of Switch 2 launch restrictions
01:15 Gezine recommends an internal network
01:59 Reusing the Pico 2 W from my CivSwitch guide
02:38 ESP32 and Ethernet alternatives
02:56 How the Pico 2 W serial bridge works
04:22 Download and flash the bridge firmware
04:57 Connect Switch 2 to Switch2Bridge
05:37 Launch Civilization VII and the saved loader
06:17 Download the repo and check Python
06:57 Find the Pico's COM port in Device Manager
07:28 Install the Python requirements
07:47 Send the hello.js payload
08:31 Test the blocked system-update connection
WATCH FIRST
CivSwitch Setup Guide for Switch 2: Step by Step
youtube.com/watch?v=sxFJqAfduHU
RESOURCES
CivSwitch Pico 2 W Serial Bridge by favas0:
github.com/favas0/CivSwitch-Pico2W-SerialBridge
Original CivSwitch Serial Bridge by Jack Spence (ESP32 / Raspberry Pi):
github.com/jackspence7/CivSwitch-SerialBridge
Pico 2 W board shown (Amazon):
amazon.com/dp/B0DP54FWX1
Community report discussed:
reddit.com/r/switch2hacks/comments/1xu2zdc/comment/19skl65g2m8n8
Gezine:
https://x.com/gezine_dev
Blocking Nintendo servers guide:
https://switch.hacks.guide/extras/blocking_nintendo?tab=setting-up-a-new-connection-via-wi-fi
90DNS project:
gitlab.com/a/90dns
FOLLOW ME
Twitter: https://x.com/mbcrump_youtube
Bluesky: https://bsky.app/profile/crump-youtube.bsky.social
#Switch2 #CivSwitch #Pico2W










