Stop Splintering with This Trick @ToolsToday
Stop Splintering with This Trick  @ToolsToday
Uploaded December 2025 | Updated September 2026, 6 hours ago
First pass shows the ugly truth—offcut side of the plywood all fuzzy and chipped, while the Milescraft 1409 TrackSawGuide side stays clean. Add a strip of blue tape, make the same cut, and now both edges come off the saw with crisp, splinter-free plywood. Check out the tools on our website -

Milescraft TrackSawGuide - toolstoday.com/milescraft-1409-tracksawguide.html

ScotchBlue Original Multi-Surface Painter's Tape - toolstoday.com/3m-2090-36nc-scotchblue-original-multi-surface-painters-tape-36mm-x-60-yards

#short #shorts
Stop Splintering with This TrickCutting Clear Acrylic Templates with LaserCut Precise Tapered Legs6inch CNC Sanding with 120–320 Grit on Epoxy and WoodTight Box Joints Every TimeLaser Cutting Clear Acrylic TemplatesCutting Leather Holder with CNC MachinePowermatic’s New 15” Planer Is Here - ToolsTodayCleaning Up PocketsEngraving a Jewelry BoxFavorite Cordless Miter Saw SetupCompact Router Table Setup
ToolsToday |

Stop Splintering with This Trick

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER