Uploaded September 2026 | Updated November 2026, 3 hours ago
If you've had HVAC techs chasing intermittent communication errors on a long control run, this one's for you. On extended thermostat and control wiring, especially outdoor runs, transient spikes from lightning storms are a common way to stop systems from talking to each other reliably.
Using shielded cable on those runs eliminates a lot of these weird faults. If a rewire isn't an option, bundle all unused conductors together and ground them on one side only (never both — that creates a ground loop and can make noise worse). Same rule applies to the shield itself: ground it on one side, not two.
Good, tight connections matter just as much — no double-lugging, no sketchy pigtails. Get these basics right up front and you'll save yourself a callback down the road.
#HVACSchool #HVACTraining #ShieldedCable #GroundingTips #ControlWiring #HVACR
---
NEXT VIDEO
MacGyver Fix to a Communicating AC System
youtube.com/watch?v=tIjWbz7xwVs&t=7s
KEEP LEARNING
Start here:
hvacrschool.com/start
Free HVAC/R training, tech tips, quizzes, calculators, courses, and more:
hvacrschool.com
Listen to the HVAC School podcast:
hvacrschool.com/podcast
Get the HVAC School app:
hvacrschool.com/apps-page
HVAC School provides free HVAC/R training—primarily for techs, by techs. The goal is not just to collect facts. It is to understand the system well enough to apply what you know in the field.
Questions or corrections? Leave a comment and include the equipment model, measurements, and source when you can. None of us gets everything right, and good measurements beat confident guesses.
This content is educational. Follow manufacturer instructions, use proper PPE and safe work practices, and comply with the codes and standards that apply to your equipment and jurisdiction.
If you've had HVAC techs chasing intermittent communication errors on a long control run, this one's for you. On extended thermostat and control wiring, especially outdoor runs, transient spikes from lightning storms are a common way to stop systems from talking to each other reliably.
Using shielded cable on those runs eliminates a lot of these weird faults. If a rewire isn't an option, bundle all unused conductors together and ground them on one side only (never both — that creates a ground loop and can make noise worse). Same rule applies to the shield itself: ground it on one side, not two.
Good, tight connections matter just as much — no double-lugging, no sketchy pigtails. Get these basics right up front and you'll save yourself a callback down the road.
#HVACSchool #HVACTraining #ShieldedCable #GroundingTips #ControlWiring #HVACR
---
NEXT VIDEO
MacGyver Fix to a Communicating AC System
youtube.com/watch?v=tIjWbz7xwVs&t=7s
KEEP LEARNING
Start here:
hvacrschool.com/start
Free HVAC/R training, tech tips, quizzes, calculators, courses, and more:
hvacrschool.com
Listen to the HVAC School podcast:
hvacrschool.com/podcast
Get the HVAC School app:
hvacrschool.com/apps-page
HVAC School provides free HVAC/R training—primarily for techs, by techs. The goal is not just to collect facts. It is to understand the system well enough to apply what you know in the field.
Questions or corrections? Leave a comment and include the equipment model, measurements, and source when you can. None of us gets everything right, and good measurements beat confident guesses.
This content is educational. Follow manufacturer instructions, use proper PPE and safe work practices, and comply with the codes and standards that apply to your equipment and jurisdiction.










