Uploaded February 2017 | Updated November 2026, 2 days ago
Last week I posted a video of a steel feather quill that I made for @onecarworkshop 's #nolathepenchallenge link below. I needed a way to display it. The hard part was that the quill is so heavy that the base needed to be able to hold the weight. So after looking around the garage for different pieces of wood, and not finding any I gave up. Then as I was on my way out to run an errand I noticed the stone edging surrounding our garden. At that moment the idea popped in my headed. The stone would be heavy enough to hold the quill and might just be visually interesting. So I grabbed some chisels, that I'm pretty sure aren't for stone work or maybe they are I don't know, to cut the stone in to manageable pieces and then I carved out a small recess for the inkwell using a masonry drill bit to remove most of the material and then the chisels to clean up the cut. I used a 3/16" masonry drill bit to make the angled hole for the quill. I really like the way it turned out despite the cuts not being super clean and perfect. Thanks for watching.
Also feel free to suggest any SEO keywords for this video as I don't really have many for this one. I don't think there are a lot of people searching for how to make a stone quill holder for their steel feather quill. Thanks in advance.
No Lathe Pen Challenge Video:
youtube.com/watch?v=Khokap7AP5o&t=7s
No Lathe Pen Challenge Playlist:
youtube.com/playlist?list=PLHoCZ7LR6hNrJHIlhZxW876wEhs9ReQTt
My Steel Feather Quill Video:
youtube.com/watch?v=rDKh2150qYg
Last week I posted a video of a steel feather quill that I made for @onecarworkshop 's #nolathepenchallenge link below. I needed a way to display it. The hard part was that the quill is so heavy that the base needed to be able to hold the weight. So after looking around the garage for different pieces of wood, and not finding any I gave up. Then as I was on my way out to run an errand I noticed the stone edging surrounding our garden. At that moment the idea popped in my headed. The stone would be heavy enough to hold the quill and might just be visually interesting. So I grabbed some chisels, that I'm pretty sure aren't for stone work or maybe they are I don't know, to cut the stone in to manageable pieces and then I carved out a small recess for the inkwell using a masonry drill bit to remove most of the material and then the chisels to clean up the cut. I used a 3/16" masonry drill bit to make the angled hole for the quill. I really like the way it turned out despite the cuts not being super clean and perfect. Thanks for watching.
Also feel free to suggest any SEO keywords for this video as I don't really have many for this one. I don't think there are a lot of people searching for how to make a stone quill holder for their steel feather quill. Thanks in advance.
No Lathe Pen Challenge Video:
youtube.com/watch?v=Khokap7AP5o&t=7s
No Lathe Pen Challenge Playlist:
youtube.com/playlist?list=PLHoCZ7LR6hNrJHIlhZxW876wEhs9ReQTt
My Steel Feather Quill Video:
youtube.com/watch?v=rDKh2150qYg










