Uploaded August 2017 | Updated November 2026, 3 hours ago
THIS THING JUST DOESN'T WANT TO IDLE. The only thing we have not fiddled with are the fuel jets, but I believe those are only for top end. It runs right now with the choke on, but revs high then stalls when the choke is off. Still have no idea whats wrong with it. I have a new crf250 exhaust on the way, maybe that back pressure will help a little.
THIS THING JUST DOESN'T WANT TO IDLE. The only thing we have not fiddled with are the fuel jets, but I believe those are only for top end. It runs right now with the choke on, but revs high then stalls when the choke is off. Still have no idea whats wrong with it. I have a new crf250 exhaust on the way, maybe that back pressure will help a little.
![Civic Coupe EX (D17) Stage 3 Yonaka 6 Puck Clutch Install [Full Length]
This is how to replace your clutch on your honda civic d17. This should be similar to a d16 or a d15 with a different shift linkage. I replaced it with a stage 3 6 puck clutch to handle to power we will give it from the turbo kit.
Here is the clutch and alignment tool I used:
https://www.amazon.com/Yonaka-Honda-Performance-Clutch-Ceramic/dp/B009R6ZWR4/ref=sr_1_2?s=automotive&ie=UTF8&qid=1517160853&sr=1-2&keywords=d17+stage+3+clutch
https://www.amazon.com/ACT-AT20-Clutch-Alignment-Tool/dp/B000CIG3CE/ref=sr_1_fkmr0_1?s=automotive&ie=UTF8&qid=1517160867&sr=1-1-fkmr0&keywords=at20+clutch+allignment+tool
Check out my online store: http://www.japandatuning.com/shop Civic Coupe EX (D17) Stage 3 Yonaka 6 Puck Clutch Install [Full Length]](https://i.ytimg.com/vi/Wlv5adGbFp4/mqdefault.jpg)









