Uploaded January 2021 | Updated November 2026, 12 hours ago
Hey Guys,
This is a look at the latest two projects I have been working on for Steve.
Once of these units were extremely rusty so sandblasted it and repainted the interface parts. There was also a broken key stop and had been replaced with a stop that was too short to adjust key height as well as would not hold a key bushing. I had a donor polymoog key stop I installed and was able to align key and install all new key bushings.
Bottom unit got a good electronic servicing as well as a keyboard rebuild with new key bushings but cosmetically, it will just be getting a good cleaning.
Here is a link for those that may have missed the video going over the guts:
youtube.com/watch?v=21vrz2qnbn8
Thanks for watching!
Sincerely,
Jareth
Hey Guys,
This is a look at the latest two projects I have been working on for Steve.
Once of these units were extremely rusty so sandblasted it and repainted the interface parts. There was also a broken key stop and had been replaced with a stop that was too short to adjust key height as well as would not hold a key bushing. I had a donor polymoog key stop I installed and was able to align key and install all new key bushings.
Bottom unit got a good electronic servicing as well as a keyboard rebuild with new key bushings but cosmetically, it will just be getting a good cleaning.
Here is a link for those that may have missed the video going over the guts:
youtube.com/watch?v=21vrz2qnbn8
Thanks for watching!
Sincerely,
Jareth










