Steam Assisted Motor using Sugar Rocket Fuel 2-5-2011 @mojaverockets
Steam Assisted Motor using Sugar Rocket Fuel 2-5-2011  @mojaverockets
Uploaded February 2011 | Updated November 2026, 2 days ago
This was the first static firing of a prototype sugar and KNO3 propellant rocket motor with a water jacket copper motor casing cooling system. As the end burning solid motor burns it heats the water in the surrounding copper jacket. This provides a steam assist near the end of motor burn out using the water heated by the propellant combustion. Initial test was performed without a nozzle. 100 ml of water was used and less than 0.5 ml remained after motor test. All solder joints remained intact. When the steam was released the remaining plug of sugar propellant was expelled from the motor and can be seen burning on the test pad in the final 5 seconds.
Steam Assisted Motor using Sugar Rocket Fuel 2-5-2011long burn solid rocket motor static fire by John Newmantumbling tumbleweedSingle 98mm KNSB sugar propellant grain test Feb 6 2021MSAC sugar rocket test launch for the FAR-1030 Jan 5 201912 inch diameter KNSB propellant sugar rocket at FAR for Sugar Shot to SpaceMSAC  M-impulse sugar motor static test2012 3-3 FAR Activities: Sugar motors, Recovery ejection test and a ZnS CATOSugar Sorbitol and Nitrous hybrid rocket motor testMiniSShot flight videos in Sugar Shot to Space project April 2010Two Finocyl Grain tests 04 2009SEDS Vulcan liquid propellant rocket flight at FAR
mojaverockets |

Steam Assisted Motor using Sugar Rocket Fuel 2-5-2011

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER