My 6040 CNC | Stage power stringer video 1 @rickcperry | Uploaded May 2014 | Updated October 2024, 11 hours ago.
A little DIY video of me making a stage power stringer
All materials bought at Home Depot.
The cable was found on a spool in the electrical section. It's 12/3 S.O. cable and was about $110.00
The boxes are the industrial style metal boxes, not the wall mount kind. These boxes will not accept a simply top plate, you must run the metal top plate for this style.
The top plates are matches to the boxes and require you bolt the receptacle to the plate and not in the box
The receptacles are 15 amp style security ones that have the little window that covers the openings when not in use.
The end for the wall is the style that alerts you of mis wiring. The 15 amp style will not allow the SO cable to go thru the strain relief, so a 20 amp plug is required.
Sorry there are no part numbers but someone at home depot can help you find these quickly.
A little DIY video of me making a stage power stringer
All materials bought at Home Depot.
The cable was found on a spool in the electrical section. It's 12/3 S.O. cable and was about $110.00
The boxes are the industrial style metal boxes, not the wall mount kind. These boxes will not accept a simply top plate, you must run the metal top plate for this style.
The top plates are matches to the boxes and require you bolt the receptacle to the plate and not in the box
The receptacles are 15 amp style security ones that have the little window that covers the openings when not in use.
The end for the wall is the style that alerts you of mis wiring. The 15 amp style will not allow the SO cable to go thru the strain relief, so a 20 amp plug is required.
Sorry there are no part numbers but someone at home depot can help you find these quickly.
