Uploaded June 2016 | Updated November 2026, 1 hour ago
Washington was ordered by Transatlantic Steamship Company and laid down on 20 January 1931 in Shipway O at New York Shipbuilding in Camden, New Jersey. By the time the vessel was launched on 20 August 1932, Transatlantic Steamship's assets had been acquired by International Mercantile Marine, and the Washington went into service for the United States Lines following delivery on 2 May 1933.
At the time of their construction, Washington and her sister ship SS Manhattan, also built by New York Shipbuilding, were the largest liners ever built in the United States, a status they held until the 1939 launch of SS America. Washington and Manhattan were two of the few pure ocean liners built by New York Shipbuilding, which had previously built a large number of cargo liners. Accommodations were 580 in Cabin class, 400 in Tourist, and 150 Third class. Both ships were to garner a reputation for a very high standard of service and luxury.
Tonnage: 29,289 GRT
Length: 705 ft 3 in (214.96 m)
Beam: 86 ft 0 in (26.21 m)
Decks: 8
Propulsion: B&W boilers, Parsons steam turbines (30,000 shaft HP) - twin screw
Speed: 20.5 knots
Crew: 565
Washington was ordered by Transatlantic Steamship Company and laid down on 20 January 1931 in Shipway O at New York Shipbuilding in Camden, New Jersey. By the time the vessel was launched on 20 August 1932, Transatlantic Steamship's assets had been acquired by International Mercantile Marine, and the Washington went into service for the United States Lines following delivery on 2 May 1933.
At the time of their construction, Washington and her sister ship SS Manhattan, also built by New York Shipbuilding, were the largest liners ever built in the United States, a status they held until the 1939 launch of SS America. Washington and Manhattan were two of the few pure ocean liners built by New York Shipbuilding, which had previously built a large number of cargo liners. Accommodations were 580 in Cabin class, 400 in Tourist, and 150 Third class. Both ships were to garner a reputation for a very high standard of service and luxury.
Tonnage: 29,289 GRT
Length: 705 ft 3 in (214.96 m)
Beam: 86 ft 0 in (26.21 m)
Decks: 8
Propulsion: B&W boilers, Parsons steam turbines (30,000 shaft HP) - twin screw
Speed: 20.5 knots
Crew: 565






![s.s. Berlin - North German Lloyd - Music,music,music - (30ies Swing)
The Berlin III was built by Bremer Vulkan at Vegesack, Germany (Yard 614) and was completed in March 1925. She was launched on 25 March 1925, and commissioned on 17 September 1925. The ship was 572 ft (174 m) long, had four decks and a volume of 15,286 gross register tons. She originally operated the Bremen – Southampton – Cherbourg – New York City run for the North German Lloyd Line.
The ships main route was between Bremerhaven, Southampton and New York, which she began on 26 September 1925 and operated until May 1939 when she was laid up in Bremerhaven for refitting. On 12 November 1928, the Berlin rescued the passengers and crew of the liner Vestris,[1] which sank off the coast of Virginia en route from New York City to Barbados. An estimated 113 people died in the sinking.
The Berlin was chartered by the Nazis in 1939 as a Strength Through Joy (Kraft durch Freude, KdF) workers cruising ship and was used as a hospital ship later on in World War II.
onnage: 15,286 GRT (originally);
17,053 GRT (after conversion)
Length: 572 ft (174 m)
Beam: 21.02 m (69.0 ft)
Speed: 16 knots (30 km/h; 18 mph)
Capacity: 1,101 + 24 extra passengers: 323 first-class; 290-second-class; 488 third-class;
Complement: 313 + 41 extra crew s.s. Berlin - North German Lloyd - Music,music,music - (30ies Swing)](https://i.ytimg.com/vi/V5yjX6u1I-Q/mqdefault.jpg)



