Mounting an xTool Screen Printer Frame on an Xtool P2 CO2 laser Zentient1 2024-01-09 | My wife and I received our xTool screen printing multicolor kit a few days ago. Although the kit it comes with fixtures to align frames when placed in the S1 and D1 lasers, we want to use it with our xTool P2 CO2 lasers.This video shows how I am positioning the frames in the laser. By registering the frames on a set of pins, multiple screens can be aligned, one for each color. The second goal of this configuration is to make it easy to exhaust the smoke that is generated when cutting the screen on the laser.Affiliate link: xtool.com/?ref=9YWRJW2VrG82
Birdfy Mount Modification Zentient1 2023-11-09 | Birdfy mount modification for use on RC2 quick release
xTool F1 at the Bergen Makerspace 09/21/2023 Zentient1 2023-09-29 | Demonstrating some of the F1 features.If you want any xTool equipment, please use my affiliate link: xtool.com/products/xtool-f1?ref=9YWRJW2VrG82&utm_medium=5306&utm_source=influencerOther equipment shown:The lights shown are amazon.com/dp/B0BZ87Q86MThe 235mm honeycomb is from Amazon and I added a couple of magnets and some tape. amazon.com/gp/product/B0CBSWC2G2I show how I make the magnetic pins in this video. youtu.be/XkKa0OlF5CQ
xTool Demo Room - Host: Alan Zenreich Zentient1 2023-07-27 | To book a demo with us, please visit xtool.com/products/demo-room-host-nj-alan-zenreichThe list of all demo room hosts: xtool.com/pages/demo-room-visit 00:00 - Start00:04 - Introduction00:51 - Equipment overview01:17 - Basic P201:28 - Live view equipment01:58 - P2 with riser base02:21 - Moveable counters02:32 - M1 laser02:58 - Smoke purifier03:08 - Workstation03:15 - Example project04:00 - New project04:05 - Surface selection04:12 - Material selection04:42 - Add a circle05:10 - Add a QR code05:45 - Add text05:58 - Add curved text06:55 - Align and group objects07:10 - Use cameras for position07:34 - Smart Fill replicates objects08:10 - Run the project08:31 - Visitor notes11:28 - Demo room web page QR code
xTool M1 Inlay Demo Setup Zentient1 2023-06-17 | Affiliate link: xtool.com/?ref=9YWRJW2VrG82 This video shows how I used an xTool M1 laser to demonstrate inlaying paua shell into walnut wood at the 2023 American Association of Woodturners Symposium.
Excerpt: Using a Laser for Inlaying a Paua Shell Heart Into Wood Zentient1 2023-02-14 | This video is a short excerpt from a 2 hour live online session I presented recently for a woodturning symposium.The session was called Introduction to lasers for woodturners, but it would be a good session for many types of makers wanting to learn about what you can do with lasers.Because Valentines Day was coming up, I showed short video that demonstrated one way of inlaying a heart shape piece of Paua shell into a piece of wood.We join the session in progress.
xTool D1 Pro Laser and Enclosure - Overview and DIY Customizations. Zentient1 2022-11-08 | This video shows some of the differences between my D1 and the D1 Pro as well as some tweaks I’ve made to the D1 Pro and the xTool enclosure.Affiliate link: xtool.com/?ref=9YWRJW2VrG82Here are some of my other videos mentioned:Tips For Using the xTool RA2 Pro Rotary Attachment - Part 1youtube.com/watch?v=u0UCs02mifEMagnetic Pins for Laser Engraving and Cutting Device Bedsyoutube.com/watch?v=XkKa0OlF5CQDIY Enclosure for an xTool D1 laseryoutube.com/watch?v=Guc0GuOIn6QEasy Cable Drag Chain Installation for xTool D1 Laseryoutube.com/watch?v=KmhwpVxzuro00:00 - Introduction01:00 - D101:26 - D1 Pro02:48 - D1 accessories03:31 - Limit switches04:17 - LightBurn04:25 - XCS04:59 - Limit switch details05:41 - Easy connectors to miss06:27 - Alternate cable routing07:40 - Module wiring and power supplies08:06 - Module shield09:22 - Focus kickstand10:29 - Much quieter10:48 - DIY platform11:22 - Honeycomb grip12:01 - Why I use enclosures12:32 - xTool enclosure14:19 - Enclosure modifications14:23 - Enclosure lighting15:15 - Enclosure mounting bar15:48 - Enclosure air assist hose and valve16:37 - Enclosure height extender17:36 - Enclosure fire extinguisher18:36 - Enclosure remote view camera19:23 - Enclosure camera for LightBurn19:57 - Closing thoughts
Tips For Using the XTool RA2 Pro Rotary Attachment - Part 1 Zentient1 2022-05-03 | This first video in a series about using the RA2 Pro Rotary attachment, looks at some helpful tips for using the chuck configuration.Affiliate links:Xtool RA2 Pro Rotary Attachment: xtool.com/products/xtool-ra2-pro-the-worlds-first-4-in-1-rotary-for-laser-engraver?ref=9YWRJW2VrG82&utm_source=influencerXtool D1 laser and accessories:xtool.com/?ref=9YWRJW2VrG82&utm_source=influencer
Magnetic Pins for Laser Engraving and Cutting Device Beds Zentient1 2022-03-10 | This video shows some magnetic pins that I created for use with the honeycomb bed of my laser engraving and cutting devices. It also shows how I use magnets to hold down some work pieces.Then we’ll see the parts and assembly technique for creating the pins.Affiliate link: xtool.com/?ref=9YWRJW2VrG82Resources: The magnets are from K&J Magnetics. kjmagnetics.com/proddetail.asp?prod=R422The 7mm jewelry spikes are from Amazon. smile.amazon.com/gp/product/B08JHX2ZCLThe screws, washers, magnets and mending plates are from Lowes or Home Depot.
DIY Enclosure for an Xtool D1 laser Zentient1 2022-02-23 | This video shows an enclosure I built for the Xtool D1 10 watt diode laserThis isn't a tutorial, but if you are building or looking to acquire an enclosure, this might be a source of ideas.Edit: I just noticed that I said the fire extinguisher activates at 170 degrees Fahrenheit… I should have said Celsius.I will post resources here soon.Affiliate link: xtool.com/?ref=9YWRJW2VrG82
Easy Cable Drag Chain Installation for Xtool D1 Laser Zentient1 2022-02-18 | For those who want to neaten the cable travel on their Xtool D1 laser,This is a simple solution that takes only a couple of minutes and uses the existing wiring. Affiliate link: xtool.com/?ref=9YWRJW2VrG82Note that some folks have tried this and said their cable wasn’t quite long enough. It’s entirely possible that the shipped cable length might vary, but this obviously worked on my unit. Some additional thoughts: Note that the cable does not enter and exit through the chain end, but instead a few links in. Make sure the ends are fastened as shown in the video (it might help to move the ends slightly in towards the center of the machine). Make sure the loop at the front of the unit is cinched down tight with a zip tie, so it doesn’t move.
Sphere spraying jig Zentient1 2021-12-06 | This video show a jig with three 4" sewing needles that support a sphere for spray finishing
EGO 18 Chainsaw DIY Case Zentient1 2021-09-13 | This is a DIY project, making a carrying case for an EGO 18" battery powered chainsaw. It uses a 26" Husky toolbox from Home Depot, and optionally, some Ego battery wall mounts found on Thingiverse.com that I 3D printed.
Hollyland Lark 150 Setup - Avoid confusion Zentient1 2021-01-05 | Here’s a quick tip that will hopefully avoid some confusion for those who are unboxing their Hollyland Lark 150 wireless microphones.When the units have been powered on, and placed into the charging case, everything is supposed to go into a suspend mode, and if you press one of the buttons on the receiver the display should show the charge status of each of the components. However, when I did this, the pieces all stayed in transmit mode, and did not charge. After some head scratching, I wondered if the units were connecting to the contacts at the base of each bay. What I didn’t realize, and the documentation doesn’t mention is that the package ships with some blue plastic shipping insulators between the units and the contacts. So just remove these three strips and you’ll get the expected behavior.
Anova Precision Oven - Shrimp Boil Zentient1 2020-10-13 | Our first time using the app to control the oven through a multi-stage process. The results were delicious
Anova Precision Oven - First Cook - Steak Zentient1 2020-10-10 | Our first cook in the new oven... a prime steak in sous vide mode.
Setting up the Anova Precision Oven Zentient1 2020-10-04 | Initial assembly and setup for the newly arrived convection steam oven.
Unboxing the Anova Precision Oven Zentient1 2020-10-03 | The long awaited Anova Precision Oven arrived today. I'll try to make some additional videos of its assembly and our initial observations as we get to know the new kitchen tool.
Trailcam captures visitors to our back 40 Zentient1 2020-08-26 | The creatures that visited our woods over the course of 3 days
Black garlic first attempt - Part 1 - Preparing the garlic for cooking Zentient1 2019-10-06 | This is our first attempt at making black garlic. Here i am preparing the garlic and loading it into the black garlic cooker
Bergen County Players cast of Pippin - Oradell Family Day 2019 Zentient1 2019-09-23 | Bergen County Players cast of Pippin - Oradell Family Day 2019
Pippin Minute - Bergen County Players 2019 Zentient1 2019-09-13 | A little taste of our upcoming production of Pippin.
Sony RX0 II with Rode Wireless Go Microphone Zentient1 2019-04-25 | This video shows how compact this combination can be. It uses a 3D printed cold shoe to mount the receiver. It can be used with the Sony hand grip to enable zoom.
Testing Sony RX0 II with Rode Wireless Go microphone Zentient1 2019-04-22 | Dinner at Shanghai restaurant, Fort Lee NJ. First test of Sony RX0 II with Rode Wireless Go microphone. Shot 1080p/60. Used built in omnidirectional mic of the Rode transmitter, clipped to shirt. The supplied "dead kitten" did a good job of suppressing the 'wind' noise from the air vents in the ceiling. Rode receiver set to lowest db output, RX0 II audio level manually set to 1.
Time lapse of a 3D print with an unusual hardware and software setup. Zentient1 2018-12-28 | Creating an OctoLapse style time lapse video on a SeeMeCNC Artemis delta 3D printer. Hardware includes an X-Keys controller and vMix software.
Using an iPhone with a DJI Osmo Pocket via a USB Type-C to Type-A adapter and a lightning USB cable Zentient1 2018-12-17 | This is a little video just to show one way of connecting an Osmo pocket to an iPhone. This could be useful because as of this recording DJI has not released any accessories for the device.
Rupert Holmes talks about the Bergen County Players Zentient1 2018-10-06 | An excerpt from a conversation with Rupert Holmes, the man behind the Tony Award-winning The Mystery of Edwin Drood. A Bergen County Players production. The full conversation video is here: youtube.com/watch?v=i9v5X07Xr38
Conversation with Rupert Holmes - Bergen County Players Zentient1 2018-10-05 | A Conversation with Rupert Holmes, the man behind the Tony Award-winning The Mystery of Edwin Drood. A Bergen County Players production.
SWAT 2018 Remote Demo Drone Flight Zentient1 2018-08-30 | This is a short excerpt from the Remote Demonstrations session... a fun little exercise where I fly a Tello drone to record video of the audience.
Rethinking Woodturning Demonstrations 2018 Panel Discussion Zentient1 2018-08-15 | Recorded during the 2018 American Association of Woodturners (AAW) special interest night panel discussion about using live video for remote demonstrations and sharing woodturning techniques.
Laser marking of practice disks for embellishment with ink Zentient1 2018-06-02 | Preparing practice disks that Lauren will make available at the AAW 2018 Symposium in Portland. These will be part of a kit with pens, brushes and other items related to embellishing wood projects with archival inks.
Spiral tower time lapse Zentient1 2018-03-19 | This is a test of a spiral tower design I've been working on as well as a first time use of VideoVelocity time lapse software.The camera is capturing one frame every 3 seconds, so you really only see it as a circular rotation, instead of seeing the print head stop and print each of the tube segments.The tower has been modeled in Fusion 360 with parameters for things like number of tubes, tube diameter, overall height, etc.The model was sliced in Simplify 3D and printed on a SeeMeCNC Artemis with ProtoPasta Magnetic Iron filament.The finished tower will then be soaked in vinegar and salt, to promote a rusted patina.The tower is about 2.5" tall will serve as a base for a 3" wood turned sphere embellished with Archival inks.Special thanks to John Diamond for collaborating on the modeling.
Personal Protection Equipment for Woodturners Zentient1 2018-02-02 | In this video, I’m going to cover a topic that is near and dear to my heart, Personal Protection Equipment for woodturning. Unlike shop protection equipment, like a dust collector, I’ll present an overview of the things I can do and wear in my shop to protect myself from, or minimize, harm.
SeeMeCNC 3D Printer Users Group Facebook Challenge - Part 1 Zentient1 2018-01-20 | Printing and support removal footage from my entry in the Maverick Pilot Skull print challenge - January 2018Print made with Proto-Pasta Magnetic Iron filament on a SeeMeCNC Artemis 3D printer.Part 2 will cover the "rusting" process.
Maverick Skull first print Zentient1 2018-01-17 | First test print for the Facebook SeeMeCNC 3D Printer Users Group challenge. The video shows my first Maverick Skull print. It is for those of us who like watching other folks fuss with removing supports. This is likely not the print that I will submit for the challenge... I have something else in mind. However this was a good test print, and I know the kinds of changes I want to make going forward.
SeeMeCNC Artemis 3D printer - 510mm Rocket in spiral/vase mode Zentient1 2017-12-26 | Printing a test on the new Artemis delta style 3D printer.thingiverse.com/thing:2008193
Assembling the SeeMeCNC Artemis 3D printer Zentient1 2017-12-26 | Time-lapse footage of the assembly process.
Behind the scenes of a Personal Protection Equipment video Zentient1 2017-12-21 | A quick look at the setup we used to record Lauren's PPE video for the American Association of Woodturners.
Rethinking Woodturning Demonstrations 2017 Panel Discussion Zentient1 2017-10-08 | Recorded during the 2017 American Association of Woodturners (AAW) special interest night panel discussion about using live video for remote demonstrations and sharing woodturning techniques.
Woodturning With Physical Limitations - 2017 AAW Symposium Zentient1 2017-10-07 | This panel discussion was recorded during the American Association of Woodturners Symposium, June 2017 in Kansas City MO.
Chuck Beland woodturning with Essential Tremors (ET) Zentient1 2017-10-06 | Full video of Chuck showing how wrist weights help with his ET when doing woodturning. This was prepared for a session at the woodturning AAW Symposium 2017. A shorter, edited version of this video that has 2 minutes of additional footage (for comparison) of similar cuts by a turner without ET is here: youtu.be/H99GPyxQPqQ
Chuck Beland Essential Tremors Zentient1 2017-10-01 | Practical effects of Essential Tremors - Compare Chuck Beland's woodturning without wrist weights , with weights, and a turner without ET. The original, longer version that Chuck prepared for the AAW Symposium is here: youtu.be/oA6kCcfwyys
8 Cameras Into Vmix on a Laptop Computer Zentient1 2017-09-03 | This video shows a quickly produced test to see if I can connect 8 different cameras to a notebook computer.I doubt I’d use this many cameras in a production, but it’s worth experimenting to see if I can come up with a connection topology that actually lets each camera connect.
StreamFest 2017 - Rethinking Demonstrations - Teaching Woodturning Using Live Video Zentient1 2017-08-08 | This presentation was part of the very first StreamFest. The 14 hour, live online event brought together live streamers from many parts of the world… everyone willing to share how they are using live video streaming to reach audiences. I hope you find our use of technology to reach and teach woodturning entertaining, and perhaps give you some ideas on how you might use live streaming in your own work.
Woodturned Jewelry Demonstration Overview Zentient1 2017-06-19 | This video contains selected clips from a typical 2 hour demonstration about making woodturned jewelry. We usually do this via a two-way real time video call with a woodturning club.The audience can see and hear us, and we can see and hear them, so it's quite interactive.
