Uploaded December 2020 | Updated November 2026, 2 days ago
I did a similar video one year ago. This time I show a demonstration in real time (ish).
Chapters:
0:00 - Intro
1:47 - Shout out. Some sun for Tommy Ovesen!
2:47 - Checking the scanned image
5:30 - Creating a component
7:59 - Wrong scale on vertical axis
8:53 - Measure, set DPI and scale the image in GIMP
15:35 - Using the scaled image
16:42 - All done. Ripping it up and doing it over!
18:20 - Placing parts (not needed)
18:51 - Placing VIAs
21:15 - Placing 2.54mm pitched VIAs using the grid
22:00 - Measuring and setting pad and hole size
25:07 - Copy, paste (CTRL C CTRL V), rotate, snap to grid.
35:13 - VIA placing time lapse
37:29 - Tracks
40:13 - Zones
41:43 - Automatic Ground Plane and Thermal Pads
43:00 - Lonely Islands, set distance to ground plane
44:25 - Photoview
44:43 - The Outline (Edge Cuts)
46:43 - Gerber and drill files
47:41 - Merry Christmas !
Tommy Ovesen's Channel: youtube.com/channel/UCJiYQTCfzbe5jZq2PXRaucg
The Hackaday Article: hackaday.com/2019/12/31/reverse-engineer-pcbs-with-sprintlayout
Other related videos:
youtube.com/watch?v=g0nkLJ4YQ2c
youtube.com/watch?v=2UtY5fDaRgo
Music:
Liptonman - Mitch / Dane - (1996) - C64 chiptune
youtube.com/watch?v=lvlrbXknvsY
I did a similar video one year ago. This time I show a demonstration in real time (ish).
Chapters:
0:00 - Intro
1:47 - Shout out. Some sun for Tommy Ovesen!
2:47 - Checking the scanned image
5:30 - Creating a component
7:59 - Wrong scale on vertical axis
8:53 - Measure, set DPI and scale the image in GIMP
15:35 - Using the scaled image
16:42 - All done. Ripping it up and doing it over!
18:20 - Placing parts (not needed)
18:51 - Placing VIAs
21:15 - Placing 2.54mm pitched VIAs using the grid
22:00 - Measuring and setting pad and hole size
25:07 - Copy, paste (CTRL C CTRL V), rotate, snap to grid.
35:13 - VIA placing time lapse
37:29 - Tracks
40:13 - Zones
41:43 - Automatic Ground Plane and Thermal Pads
43:00 - Lonely Islands, set distance to ground plane
44:25 - Photoview
44:43 - The Outline (Edge Cuts)
46:43 - Gerber and drill files
47:41 - Merry Christmas !
Tommy Ovesen's Channel: youtube.com/channel/UCJiYQTCfzbe5jZq2PXRaucg
The Hackaday Article: hackaday.com/2019/12/31/reverse-engineer-pcbs-with-sprintlayout
Other related videos:
youtube.com/watch?v=g0nkLJ4YQ2c
youtube.com/watch?v=2UtY5fDaRgo
Music:
Liptonman - Mitch / Dane - (1996) - C64 chiptune
youtube.com/watch?v=lvlrbXknvsY










