Uploaded June 2021 | Updated September 2026, 1 week ago

---

Tools: 12" adjustable channel locks with taped jaws to prevent marring

E10 socket + 6" extension
Dental pick

Torque wrench that goes down to 9nm (The torque spec is 9newton meters aka 80 inch pounds)

Gasket scraper
EGR gasket (can be reused if carefully separated)
Hi temp grease to lube the EGR body
Chain wax/engine oil/grease to lube the EGR valve blades (Optional)
Toothbrush and oven cleaner spray (Dissolves carbon)
Paper towels
Gloves
Eye protection!! Oven cleaner is sodium hydroxide (lye) and can cause blindness if it gets in your eyes, skin irritation, and it eats aluminum and hoses.
If the EGR mounting threads are stripped: Use M6x1.0 bolts (Or injector bolts cut down to length)