Uploaded April 2025 | Updated November 2026, 1 day ago
Watch me assemble Kay Koba's SPIISDv2 and show 2 enclosures I had printed at JLCPCB.Compatible with Apple II Plus, IIe, IIc, IIc Plus & IIgs.
Part II video: youtu.be/gRluyxiFoGM
🔎 *INDEX*
0:00 — Intro
1:04 — Requirements
2:14 — The Kit
3:17 — Pricing
6:41 — Kit Assembly
29:43 — Adapter Assembly
38:55 — First Test
39:34 — 3D-printed Cases
47:06 — Closing Thoughts
🛒 *KERO'S MAC MODS*
_(When accessing Kay's store, use Chrome or Firefox, not Safari)_
• SPIISDv2 kit: bit.ly/42FO5P1
• All Products on Kero's Mac Mods: en.infinityproducts.co.jp/shop-1
• 1.54" LCD: aliexpress.com/item/1005009104685556.html
🛒 *SOLDERING & CLEANING*
• 99% ISO Alcohol: amzn.to/3R5TRCk
• MG Chemicals Flux: amzn.to/3kuAcsZ
• Desoldering wick: amzn.to/4jbseUW
• Generic Solder 100g (60-40 Leaded Rosin Core 0.6mm, 2% flux): amzn.to/3FDRscn
or
• Kester Solder 454g (60-40 Leaded Rosin Core 0.8mm, 3.3% flux): amzn.to/3tLFwT9
• 2-spool Solder Holder: amzn.to/39hIMbt
• Hakko 599B Tip Cleaner: amzn.to/3RHy5o4
• Hakko Soldering Station (FX888DX): amzn.to/4kEttgq
• Hakko Fume Extractor: amzn.to/3MApWyb🛒 *TOOLS*
• Needle Nose Pliers: amzn.to/43U0WOc
• Helping Hands: amzn.to/4llkFfM
• 5x or 10x illuminated Magnifier: amzn.to/3YCySJ7
• Rubberized Vice: amzn.to/3x78yuX
• Vice & LED-lit 3x Magnifier & Rubberized Helping Hands: amzn.to/3xdAVHK
🛒 *OTHER STUFF*
• SD Cards I use for almost everything: Gigastone 16GB MLC V30: amzn.to/4jiEhiK
• ROM Xc (lets you use any of the 4 IIc ROMs): bit.ly/4a0Ia8U
• 3D Printing at JLPCB: jlc3dp.com/3d-printing-quote
• Rubber Feet for a 3D printed case: amzn.to/4jb34G0
• Gray 30cm/1' Ribbon Cable, 20-pin : amzn.to/3G9yP3y
• Rainbow 30cm/1' Ribbon Cable, 20-pin: amzn.to/4lC0daP
_NOTE: You can always buy a Ribbon cable from Kay, instead of Amazon._
• Drive Switcher from BMOW: bit.ly/3GbaD0P
(If you have one like I do, Kay recommends removing when using SPIISD's Adapter, but BMOW says you can just short the 2 dangling wires from the internal Drive Switcher board and then you use Kay's Adapter with the SPIISDv2.)
• MacEffects BLACK Case & Keyboard: bit.ly/3CsStG2
• EYOYO 10" IPS Display: bit.ly/4gSm8ah
• KARATEKA T-shirt (mine is Navy): bit.ly/48Yx6ID
• Mac Motherboard "Reloaded" Services from CayMac: bit.ly/3YnMLgP
💾 *DOWLOADS*
• Javier Rivera's CASE: bit.ly/3RTmzGQ
• Stephen Arsenault's CASE (DON'T print the "Lens" at JLC): bit.ly/4ctHSIy
• Allen William's CASE: bit.ly/4ie6Ddj
• Bruce Rayne's CASE: coming in late Sept. 2025!
• Total Reply II: archive.org/details/TotalReplay2
📚 *REFERENCE*
• SPIISDv2 Assembly: tinyurl.com/3248728t
• SPIISDv2 Usage (& Case Photos): tinyurl.com/47ncys5x
• Video by @BigBadBench : youtube.com/live/Wj6tyfeDalo
• SmartPort protocol was designed for the UniDisk 3.5: tinyurl.com/mr29v2ea
📚 *VINTAGE SMARTPORT HARD DISKS*
• Chinook CT80c: tinyurl.com/5ftj79dz
• PROAPP: tinyurl.com/yyppd7fa
• Quark QC10: tinyurl.com/4656nbbx
• CIRTECH Uni-Mate (if you have a link, please email it to me!)
🙇♂️ *SPECIAL THANKS* to Kay Koba of Kero's Mac Mods for answering my many questions and of course for making amazingly useful gadets like this! Thanks also to Stephen & Javier for feedback regarding their cases!
🙏 *THANK YOU, Paypal Supporters!* (since my last video)
• Brian Gorham 🇺🇸 (🥇TOP repeat supporter)
• Mark B Newlon 🇺🇸 (repeat supporter)
• Philippe Astier 🇫🇷 (monthly supporter)
• Mauro Acciaccaferri 🇮🇹 (monthly supporter)
• Gavin Maxwell 🇦🇺 (monthly supporter)
💰*HOW TO SUPPORT THIS CHANNEL*
paypal.me/supportJDW
📺 *Please SUBSCRIBE:*
youtube.com/c/JDW11/?sub_confirmation=1
🎬 *MY VIDEOS*
youtube.com/user/JDW26/videos
#SPIISDv2 #KerosMacMods #AppleIIc #JDW1
Watch me assemble Kay Koba's SPIISDv2 and show 2 enclosures I had printed at JLCPCB.Compatible with Apple II Plus, IIe, IIc, IIc Plus & IIgs.
Part II video: youtu.be/gRluyxiFoGM
🔎 *INDEX*
0:00 — Intro
1:04 — Requirements
2:14 — The Kit
3:17 — Pricing
6:41 — Kit Assembly
29:43 — Adapter Assembly
38:55 — First Test
39:34 — 3D-printed Cases
47:06 — Closing Thoughts
🛒 *KERO'S MAC MODS*
_(When accessing Kay's store, use Chrome or Firefox, not Safari)_
• SPIISDv2 kit: bit.ly/42FO5P1
• All Products on Kero's Mac Mods: en.infinityproducts.co.jp/shop-1
• 1.54" LCD: aliexpress.com/item/1005009104685556.html
🛒 *SOLDERING & CLEANING*
• 99% ISO Alcohol: amzn.to/3R5TRCk
• MG Chemicals Flux: amzn.to/3kuAcsZ
• Desoldering wick: amzn.to/4jbseUW
• Generic Solder 100g (60-40 Leaded Rosin Core 0.6mm, 2% flux): amzn.to/3FDRscn
or
• Kester Solder 454g (60-40 Leaded Rosin Core 0.8mm, 3.3% flux): amzn.to/3tLFwT9
• 2-spool Solder Holder: amzn.to/39hIMbt
• Hakko 599B Tip Cleaner: amzn.to/3RHy5o4
• Hakko Soldering Station (FX888DX): amzn.to/4kEttgq
• Hakko Fume Extractor: amzn.to/3MApWyb🛒 *TOOLS*
• Needle Nose Pliers: amzn.to/43U0WOc
• Helping Hands: amzn.to/4llkFfM
• 5x or 10x illuminated Magnifier: amzn.to/3YCySJ7
• Rubberized Vice: amzn.to/3x78yuX
• Vice & LED-lit 3x Magnifier & Rubberized Helping Hands: amzn.to/3xdAVHK
🛒 *OTHER STUFF*
• SD Cards I use for almost everything: Gigastone 16GB MLC V30: amzn.to/4jiEhiK
• ROM Xc (lets you use any of the 4 IIc ROMs): bit.ly/4a0Ia8U
• 3D Printing at JLPCB: jlc3dp.com/3d-printing-quote
• Rubber Feet for a 3D printed case: amzn.to/4jb34G0
• Gray 30cm/1' Ribbon Cable, 20-pin : amzn.to/3G9yP3y
• Rainbow 30cm/1' Ribbon Cable, 20-pin: amzn.to/4lC0daP
_NOTE: You can always buy a Ribbon cable from Kay, instead of Amazon._
• Drive Switcher from BMOW: bit.ly/3GbaD0P
(If you have one like I do, Kay recommends removing when using SPIISD's Adapter, but BMOW says you can just short the 2 dangling wires from the internal Drive Switcher board and then you use Kay's Adapter with the SPIISDv2.)
• MacEffects BLACK Case & Keyboard: bit.ly/3CsStG2
• EYOYO 10" IPS Display: bit.ly/4gSm8ah
• KARATEKA T-shirt (mine is Navy): bit.ly/48Yx6ID
• Mac Motherboard "Reloaded" Services from CayMac: bit.ly/3YnMLgP
💾 *DOWLOADS*
• Javier Rivera's CASE: bit.ly/3RTmzGQ
• Stephen Arsenault's CASE (DON'T print the "Lens" at JLC): bit.ly/4ctHSIy
• Allen William's CASE: bit.ly/4ie6Ddj
• Bruce Rayne's CASE: coming in late Sept. 2025!
• Total Reply II: archive.org/details/TotalReplay2
📚 *REFERENCE*
• SPIISDv2 Assembly: tinyurl.com/3248728t
• SPIISDv2 Usage (& Case Photos): tinyurl.com/47ncys5x
• Video by @BigBadBench : youtube.com/live/Wj6tyfeDalo
• SmartPort protocol was designed for the UniDisk 3.5: tinyurl.com/mr29v2ea
📚 *VINTAGE SMARTPORT HARD DISKS*
• Chinook CT80c: tinyurl.com/5ftj79dz
• PROAPP: tinyurl.com/yyppd7fa
• Quark QC10: tinyurl.com/4656nbbx
• CIRTECH Uni-Mate (if you have a link, please email it to me!)
🙇♂️ *SPECIAL THANKS* to Kay Koba of Kero's Mac Mods for answering my many questions and of course for making amazingly useful gadets like this! Thanks also to Stephen & Javier for feedback regarding their cases!
🙏 *THANK YOU, Paypal Supporters!* (since my last video)
• Brian Gorham 🇺🇸 (🥇TOP repeat supporter)
• Mark B Newlon 🇺🇸 (repeat supporter)
• Philippe Astier 🇫🇷 (monthly supporter)
• Mauro Acciaccaferri 🇮🇹 (monthly supporter)
• Gavin Maxwell 🇦🇺 (monthly supporter)
💰*HOW TO SUPPORT THIS CHANNEL*
paypal.me/supportJDW
📺 *Please SUBSCRIBE:*
youtube.com/c/JDW11/?sub_confirmation=1
🎬 *MY VIDEOS*
youtube.com/user/JDW26/videos
#SPIISDv2 #KerosMacMods #AppleIIc #JDW1