Vez3D | #SpeedBoatRace​ VzBoT Benchy race | first attempt | Nova Hotend @Vez3D | Uploaded March 2021 | Updated October 2024, 1 day ago.
-Printer: VzBoT (Custom designed/built) 330x330x400mm
-Klipper
-Pressure Advance 0.003
-Input_shaper tuned with Accelerometer
-MGN12 rails XY
-Nova Hotend with 60Watt
-PT100
-Hextrudort from HevORT direct drive. with LDO nema14 @ 0.4amp /16 microstep
-Custom EVA X carriage modded for Nova
-E3D Hight Torque 0.9 Degree @ 1.4amp / 16microsteps
-PEI coted flex plate
-10mm Z smooth rods
-1 single Z motor, 2:1 gear ratio
-0.5mm nozzle


Slicing:
-0.25 layer height
-3 botton, 3 top, 2 walls
-15% infill (I missed that one. The rule says I can use 10%. So my time will lower on next attempt)
-280C ABS
-0.3mm retract
-300mm/s for all moves (except bridging @100)
-0.25 layer height